← Tooling guide

Which tool installs this fastener?

Enter a fastener part number for the exact nose or pulling head at its diameter, the tools that take it and any adapters, from each tool maker's catalog. Or enter a tool, nose or adapter PN to see what it installs across brands. Cross-brand fits are shown only where a catalog states them; everything else reads "not documented".

Try CR3213-6-02 · HC3213-6-02 · AF3213-6-02 · NAS1446-10 · MBF2110-6-300 · HL10-6-8 · H701B-456 · G83A

Tooling for NAS9303BH

NAS9303BH is a standard part made by more than one maker, so the tooling depends on who made it.

Check the maker on the certificate of conformance or the packaging.

Made by Huck:nose 99-3442 on a 2013 tool (-4, -5, -6).

2013Also:99-344399-1335Right angle:99-1334Offset:99-133399-1336Huck 2010 catalog p.82 ↗
Other brands' noses22 statements

Cross-brand fit, only where a catalog says so

16 more statements
Each maker's part number for it3

The tooling follows the maker: these are the makers' own part numbers for this standard.

HC3214 Functional substitute, Huck (Howmet) Howmet p.2 ↗

  • Made by Huck: the same tooling as above.

CR3214 Same cross-reference group, not an equivalent of the input, Cherry Aerospace Cherry CA-1015 ↗

NAS9303B Same cross-reference group, not an equivalent of the input, a standard: any qualified maker Cherry CA-1015 ↗

Sources20
  1. Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.82, Model 2013, Standard Inline & Offset Nose Assemblies ↗
    • 99-3442 on 2013; 99-3443 on 2013; 99-1333 on 2013; 99-1334 on 2013; 99-1335 on 2013; 99-1336 on 2013: Model 2013, Standard Inline & Offset Nose Assemblies (1/8", 5/32" and 3/16" columns).
  2. Howmet, "How to order Huck-Clinch® Blind Rivets", p.2 ↗
  3. Cherry CA-1015 (CherryMAX process manual), "NAS vs. CherryMAX® Cross-Reference List" ↗
  4. Cherry Fastening Systems for Aerospace Tool Catalog (©2015 edition, archived), p.26, CherryMAX® Blind Rivets & Tools, Cherry Power Tools ↗
    • H828-8 + 744-200 on G84; H827-8 + 744-200 on G84: "* Use adapter 744-200". p.26 prints "G83A/84"; G84 only here (CA-1015 p.5 shades -8 for the G84 only).
    • H680B200A on G784: CA-1015 p.5 shades G784 + H680B200A for nominal and oversize -4, -5, -6; p.21: "The use of these riveters is not preferred".
    • H753A-456 + 680B205 on G784; H781A-456 + 680B205 on G784; H782 + 680B205 on G784: "*** Use adapter 680B205" (p.26). -4 and -5 only: CA-1015 p.5 does not shade -6 for the G784 with CherryMAX® heads, though p.26 and CA-1001 p.13 print -6; confirm with Cherry before using it at -6.
  5. Cherry CA-1001 Tool Catalog (2017), p.6, Pulling Heads table ↗
    • H701B-456 on G746A; H747-456 on G746A; H753A-456 on G746A; H781A-456 on G746A; H782 on G746A: Nominal diameters. Section 1 riveter with a Section 1 pulling head (CA-1001 p.1, p.6); CA-1015 p.5 shades nominal -4, -5, -6. The ©2015 CherryMAX guide (p.26) does not list the G746A.
  6. Cherry CA-1001 Tool Catalog (2017), p.22, Riveter Adapters ↗
    • H701B-456 + 744-300 on G83A, G84; H747-456 + 744-300 on G83A, G84; H753A-456 + 744-300 on G83A, G84; H781A-456 + 744-300 on G83A, G84; H782 + 744-300 on G83A, G84: 744-300: G83A, G84 to the G704B (CherryMAX®) mounting system "for H701B, H747, H781A, H782, H753A"; "Must remove the bayonet adapter".
  7. Cherry CA-1015 (CherryMAX process manual), p.5, CherryMAX® Tool Selection (shaded chart) ↗
    • H84A-8 on G84: CA-1015 p.5 shades G84 + H84A-8, adaptor none, nominal and oversize -8. The ©2015 guide p.26 prints "G83A/84"; the G83A is not shaded for -8 in CA-1015 and is left off.
  8. Cherry CA-1001 Tool Catalog (2017), p.8, Pulling Heads for G83A/G84 tools ↗
    • H829-8 on G84: CA-1001 p.8: CherryMAX® Right Angle H829-8, adaptor none, -5, -6, -8 ("Pulling Heads for G83A/G84 tools"); G84 only for -8 per CA-1015 p.5. Replaces the ©2015 guide's H829-56MBPS, which the 2017 catalog lists for MAXIBOLT PLUS® -5, -6.
  9. Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.43, CherryMAX®, Allmax®, HuckMAX® Nose Assemblies ↗
    • 456MAX-701-17 on GB704; 456MAX-704-54RA on GB704; 456MAX-704-43OS on GB704: "Pulls all 3" (1/8", 5/32", 3/16").
  10. Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.41, GB704 Nose Assembly Selection Chart ↗
    • 456MAX-704-35 on GB704; 456MAX-749-35 on GB704: GB704 chart; note 2: "installs 1/8", 5/32", and 3/16" diameters". The chart names CherryMAX®, not Allmax® or HuckMAX®.
  11. Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.80, Model 2013, Standard Inline & Offset Nose Assemblies ↗
    • 99-3442 on 2013; 99-3443 on 2013; 99-1333 on 2013; 99-1334 on 2013; 99-1335 on 2013; 99-1336 on 2013: Model 2013, Standard Inline & Offset Nose Assemblies (1/8", 5/32" and 3/16" columns).
  12. Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.149, Other - Gage Bilt Cross Reference, page 44 ↗
  13. Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.106, Other - Gage Bilt Cross Reference, page 1 ↗
  14. Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.142, Other - Gage Bilt Cross Reference, page 37 ↗
  15. Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.156, Other - Gage Bilt Cross Reference, page 51 ↗
  16. Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.153, Other - Gage Bilt Cross Reference, page 48 ↗
  17. Cherry CA-1001 Tool Catalog (2017), p.7, G83A Description ↗
  18. Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.154, Other - Gage Bilt Cross Reference, page 49 ↗
  19. Cherry CA-1001 Tool Catalog (2017), p.7, G84 Description ↗
  20. Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.155, Other - Gage Bilt Cross Reference, page 50 ↗

Not documented

  • NAS9303BH is a standard part number, made by more than one maker. Each tool maker's blind rivet table covers its own brand's parts, so the tooling depends on who made the part: check the maker on the certificate of conformance or the packaging.
  • The diameter is not decoded from this part number: every diameter's tooling is listed. Pick the row for your diameter.

Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.

Compatibility matrixNose by fastener, brand and diameter
FastenerTool brand-4-5-6-8-10-12
CherryMAX® / NAS9301 to NAS9312
CR3213-6-02		CherryH701B-456H747-456H753A-456H781A-456H782H680B200AH701B-456H747-456H753A-456H781A-456H782H680B200AH701B-456H747-456H753A-456H781A-456H782H680B200AH84A-8H828-8H829-8H827-8not documentednot documented
Huck99-344299-344399-133399-133499-133599-133699-344299-344399-133399-133499-133599-133699-344299-344399-133399-133499-133599-1336not documentednot documentednot documented
Gage Bilt456MAX-701-17456MAX-704-54RA456MAX-704-43OS456MAX-701-17456MAX-704-54RA456MAX-704-43OS456MAX-704-35456MAX-701-17456MAX-704-54RA456MAX-704-43OS456MAX-749-35not documentednot documentednot documented
HuckMAX™ (HR32xx)
HR3213-6-02		Cherrynot documentednot documentednot documentednot documentednot documentednot documented
Huck99-344299-344399-133399-133499-133599-133699-344299-344399-133399-133499-133599-133699-344299-344399-133399-133499-133599-1336not documentednot documentednot documented
Gage Bilt456MAX-701-17456MAX-704-54RA456MAX-704-43OS456MAX-701-17456MAX-704-54RA456MAX-704-43OS456MAX-701-17456MAX-704-54RA456MAX-704-43OSnot documentednot documentednot documented
HUCK-CLINCH® (HC32xx, NAS93xxBH)
HC3213-6-02		Cherrynot documentednot documentednot documentednot documentednot documentednot documented
Huck99-344299-344399-133399-133499-133599-133699-344299-344399-133399-133499-133599-133699-344299-344399-133399-133499-133599-1336not documentednot documentednot documented
Gage Biltnot documentednot documentednot documentednot documentednot documentednot documented
Allmax® (Allfast AF32xx)
AF3213-6-02		Cherrynot documentednot documentednot documentednot documentednot documentednot documented
Hucknot documentednot documentednot documentednot documentednot documentednot documented
Gage Biltnot documentednot documentednot documentednot documentednot documentednot documented
NAS pull lockbolts (pin and collar)
NAS1446-10		CherryH513-04-20H513-05-35H513S-05-20H513S-05-35H513-06-20H513S-06-24H513-08-35H513S-08-24H513S-10-42H513S-12-42
Huck99-265199-265499-2549S99-2550S99-3703S99-3703S-199-2552S99-2553S99-255599-255699-370499-3704-199-255899-255999-295499-256499-256599-295299-370599-3705-199-256199-256299-256799-256899-295399-1720DG99-1720DGC99-257099-257199-295799-1756DG
Gage Biltnot documentedNASS05-2480-20NASS05-204C-30OSNAS06-2480-20NAS06-204C-30OSNAS08-2480-20NAS08-204D-30OSnot documentednot documented

Each cell lists the noses the brand's own catalog names for that fastener and diameter. "Not documented" means no catalog on file names one, not that none exists. Gage Bilt states its tools and noses are interchangeable with Huck, Cherry and Allfast; its cross-reference (on each tool page) gives its PN for each Huck or Cherry PN. Allfast tooling is a gap until an Allfast tool catalog is on file. A NAS93xx blind rivet's tooling follows its maker: the Cherry cells are for Cherry-made parts, the Huck cells for Huck-made (HuckMAX™, HUCK-CLINCH®). NAS lockbolt cells name the standard itself.

Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers

Next · 3 Quote

Buy the tooling with the fasteners

Add set to quote puts the nose, the tool and any adapters on the one quote, each with its catalog citation.

Open your quote →Tooling guide by family →Tooling shop →