← Tooling compatibility finder

456MAX-704-43OS

456MAX-704-43OS offset nose assembly (pulls 1/8", 5/32" and 3/16") · Nose / pulling head · Gage Bilt · Offset

Loading 3D view...
Traced reference model. Not for machining or verified fit.

Traced from 2 manufacturer views, with published dimensions held fixed. Other shapes and unseen depths are inferred.

Built from 6 printed dimensions, 12 scaled from the figure.Details

Reference reconstruction traced from manufacturer views and constrained by printed dimensions. Undimensioned shapes and depths are inferred and labelled; omitted features mean this is not a guaranteed clearance boundary. NOT a manufacturing model or manufacturer CAD. Jaws and internal parts are not modelled. Verify fit and clearance against current manufacturer data and the physical tool.

Scaled from the catalog figure, not dimensioned

  • Frame: side outline (length): 2.98 in (scaled from Gage Bilt 456MAX-704-43OS nose assembly data sheet (Rev. 10/25) p.1, side view, not dimensioned)
  • Frame: end view outline (widest): 1.08 in (scaled from Gage Bilt 456MAX-704-43OS nose assembly data sheet (Rev. 10/25) p.1, end view, not dimensioned)
  • Frame: slot through the side (height): 0.20 in (scaled from Gage Bilt 456MAX-704-43OS nose assembly data sheet (Rev. 10/25) p.1, side view, not dimensioned)
  • Saddle: side outline (length): 0.91 in (scaled from Gage Bilt 456MAX-704-43OS nose assembly data sheet (Rev. 10/25) p.1, side view, not dimensioned)
  • Saddle: width: 0.36 in (scaled from Gage Bilt 456MAX-704-43OS nose assembly data sheet (Rev. 10/25) p.1, end view, not dimensioned)
  • Dowel: largest diameter: 0.40 in (scaled from Gage Bilt 456MAX-704-43OS nose assembly data sheet (Rev. 10/25) p.1, side view, not dimensioned)
  • Drawbolt pin: diameter: 0.15 in (scaled from Gage Bilt 456MAX-704-43OS nose assembly data sheet (Rev. 10/25) p.1, side view, not dimensioned)
  • Frame adapter: largest diameter: 0.92 in (scaled from Gage Bilt 456MAX-704-43OS nose assembly data sheet (Rev. 10/25) p.1, side view, not dimensioned)
  • Frame adapter hex: across flats: 0.99 in (scaled from Gage Bilt 456MAX-704-43OS nose assembly data sheet (Rev. 10/25) p.1, side view, not dimensioned)
  • Adapter neck: largest diameter: 0.77 in (scaled from Gage Bilt 456MAX-704-43OS nose assembly data sheet (Rev. 10/25) p.1, side view, not dimensioned)
  • Jam nut: across flats: 0.91 in (scaled from Gage Bilt 456MAX-704-43OS nose assembly data sheet (Rev. 10/25) p.1, side view, not dimensioned)
  • Mount thread: crest spacing (as drawn; not a thread specification): 0.07 in (scaled from Gage Bilt 456MAX-704-43OS nose assembly data sheet (Rev. 10/25) p.1, side view, not dimensioned)
  • Built from the Gage Bilt data sheet's side and end views (Rev 10/25), which print the head length the catalog figure leaves out. The 1.66 overall height is printed but not used: the end view's outline is scaled from the render.
  • Fastener axis to the left (-x) along the frame's top, 1.00 above the tool axis (y = 0); x = 0 at the saddle's front.
  • Part names follow the data sheet's parts list: frame, saddle, dowel pin, frame adapter, jam nut.

Not modelled

    Everything it installs1 fastener group

    CherryMAX®, Allmax®, HuckMAX® (NAS9301-9312, M7885, BACR15FP/FR, BACR15GF/GK) -4, -5, -6, per the Gage Bilt catalog

    Other brands' equivalents1 statement
    Sources2
    1. Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.43, CherryMAX®, Allmax®, HuckMAX® Nose Assemblies ↗
      • "Pulls all 3" (1/8", 5/32", 3/16").
    2. Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.142, Other - Gage Bilt Cross Reference, page 37 ↗

    Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.

    Published dimensions13 · for envelope CAD
    FeatureValueAs printedSource
    Overall length4.312 in4.312Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.43, CherryMAX®, Allmax®, HuckMAX® Nose Assemblies ↗
    Offset head height1.715 in1.715Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.43, CherryMAX®, Allmax®, HuckMAX® Nose Assemblies ↗
    As drawn (feature not labeled)1 in1.000Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.43, CherryMAX®, Allmax®, HuckMAX® Nose Assemblies ↗
    As drawn (feature not labeled)0.99 in.990Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.43, CherryMAX®, Allmax®, HuckMAX® Nose Assemblies ↗
    As drawn (feature not labeled)0.6 in.600Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.43, CherryMAX®, Allmax®, HuckMAX® Nose Assemblies ↗
    As drawn (feature not labeled)0.22 in.220

    Drawn at the jaw; the catalog does not label what it spans, so it is not used for a clearance verdict. The head is .990 wide.

    Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.43, CherryMAX®, Allmax®, HuckMAX® Nose Assemblies ↗
    As drawn (feature not labeled)4.24 in4.24 (109.5 mm)

    Side view: the saddle's front to the second jam nut's front face. The mm value differs: 109.5 mm is the earlier sheet's 4.312 (4.24 in is 107.7 mm); the model uses the inch value.

    Gage Bilt 456MAX-704-43OS nose assembly data sheet (Rev. 10/25), p.1, Nose assembly data sheet, side and end views ↗
    As drawn (feature not labeled)0.12 in.12 (2.9 mm)

    Side view: the saddle's front to the frame's front face.

    Gage Bilt 456MAX-704-43OS nose assembly data sheet (Rev. 10/25), p.1, Nose assembly data sheet, side and end views ↗
    As drawn (feature not labeled)0.2 in.20 (5.1 mm)

    Side view: the saddle's top above the fastener centreline (the frame's top).

    Gage Bilt 456MAX-704-43OS nose assembly data sheet (Rev. 10/25), p.1, Nose assembly data sheet, side and end views ↗
    Offset head height1 in1.00 (25.4 mm)

    Side view: the fastener centreline to the drawbolt pin's centreline (the tool axis).

    Gage Bilt 456MAX-704-43OS nose assembly data sheet (Rev. 10/25), p.1, Nose assembly data sheet, side and end views ↗
    Head width0.99 in.99 (25.1 mm)

    End view: the frame's width.

    Gage Bilt 456MAX-704-43OS nose assembly data sheet (Rev. 10/25), p.1, Nose assembly data sheet, side and end views ↗
    As drawn (feature not labeled)1.66 in1.66 (42.2 mm)

    End view: the head's overall height.

    Gage Bilt 456MAX-704-43OS nose assembly data sheet (Rev. 10/25), p.1, Nose assembly data sheet, side and end views ↗
    As drawn (feature not labeled)0.59 in.59 (15.1 mm)

    End view: the width of the frame's bottom face.

    Gage Bilt 456MAX-704-43OS nose assembly data sheet (Rev. 10/25), p.1, Nose assembly data sheet, side and end views ↗

    Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.

    On the floor:Low clearance puller finder

    Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers

    Next step

    Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

    Find tooling for a part number →Tooling shop →