← Tooling compatibility finder

99-1333

99-1333 nose assembly · Nose / pulling head · Huck · Offset

99-1333 installs HuckMAX™ blind rivet -4, -5, -6 on a Model 2013.

Catalog noteDetails
Figure 2; 0 flats (Nose Assembly Specifications).

3D model not available: not enough printed dimensions: head width not printed. 3D library

Everything it installs2 fastener groups

HuckMAX™ blind rivet -4, -5, -6, per the Huck catalog

HUCK-CLINCH® blind rivet -4, -5, -6, per the Huck catalog

Other brands' equivalents1 statement
Sources3
  1. Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.80, Model 2013, Standard Inline & Offset Nose Assemblies ↗
    • Model 2013, Standard Inline & Offset Nose Assemblies (1/8", 5/32" and 3/16" columns).
  2. Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.82, Model 2013, Standard Inline & Offset Nose Assemblies ↗
    • Model 2013, Standard Inline & Offset Nose Assemblies (1/8", 5/32" and 3/16" columns).
  3. Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.142, Other - Gage Bilt Cross Reference, page 37 ↗

Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.

Published dimensions3 · for envelope CAD
FeatureValueAs printedSource
Length from tool face(A, Figure 2 (p.80))4.38 in4.38

Same values in the 1/8", 5/32" and 3/16" tables.

Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.80, Nose Assembly Specifications ↗
Centerline to edge(B, Figure 2 (p.80))0.19 in.19

Figure 2 draws B from the fastener centreline to the offset edge of the nose. It covers that one edge only. Same values in the 1/8", 5/32" and 3/16" tables.

Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.80, Nose Assembly Specifications ↗
Offset head height(C, Figure 2 (p.80))1.5 in1.50

Same values in the 1/8", 5/32" and 3/16" tables.

Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.80, Nose Assembly Specifications ↗

Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.

On the floor:Low clearance puller finderOffset Huck nose assemblies: dimensions

Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers

Next step

Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

Find tooling for a part number →Tooling shop →