← Tooling compatibility finder
2013
Model 2013 pneudraulic installation tool · Installation tool · Huck
2013 installs HuckMAX™ blind rivet -4, -5, -6 with nose 99-3442, 99-3443, 99-1333, 99-1334, 99-1335 or 99-1336.
Catalog noteDetails
Traced from 1 manufacturer view, with published dimensions held fixed. Other shapes and unseen depths are inferred.
Built from 7 printed dimensions, 15 scaled from the figure.Details
Reference reconstruction traced from manufacturer views and constrained by printed dimensions. Undimensioned shapes and depths are inferred and labelled; omitted features mean this is not a guaranteed clearance boundary. NOT a manufacturing model or manufacturer CAD. Jaws and internal parts are not modelled. Verify fit and clearance against current manufacturer data and the physical tool.
- 8.05 / 204 (2013; 8.81 / 224 2013B; 9.57 / 243 2013V) Head housing's front face to the 2013 stem deflector's tip, along the head axis · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.88, 2013 Series Tooling specifications
- 10° Head axis tilt · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.88, 2013 Series Tooling specifications
- 12 / 305 (inches / mm) Top of the head housing to the base's bottom · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.88, 2013 Series Tooling specifications
- 4.88 / 124 Base height (to the shoulder's top line) · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.88, 2013 Series Tooling specifications
- .79 / 20 Nose axis to the head housing's side (top view): the housing's radius · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.88, 2013 Series Tooling specifications
- 1.10 / 27.9 Nose axis to the air swivel's elbow (top view): a z station of the top view · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.88, 2013 Series Tooling specifications
- 3.41 / 86.6 Nose axis to the air swivel's end (top view): a z station of the top view · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.88, 2013 Series Tooling specifications
Scaled from the catalog figure, not dimensioned
- Nose: largest diameter: 0.45 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.88, 2013 Series Tooling, side view, not dimensioned)
- Head front: largest diameter: 1.58 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.88, 2013 Series Tooling, side view, not dimensioned)
- Head housing: largest diameter: 1.58 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.88, 2013 Series Tooling, side view, not dimensioned)
- Deflector adapter: largest diameter: 1.38 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.88, 2013 Series Tooling, side view, not dimensioned)
- Stem deflector: largest diameter: 0.92 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.88, 2013 Series Tooling, side view, not dimensioned)
- Stem deflector cut: side outline (length): 0.86 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.88, 2013 Series Tooling, side view, not dimensioned)
- Stem deflector cut: end view outline (widest): 0.99 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.88, 2013 Series Tooling, top view, not dimensioned)
- Grip: side outline (length): 3.97 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.88, 2013 Series Tooling, side view, not dimensioned)
- Grip: width: 1.58 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.88, 2013 Series Tooling, side view, not dimensioned)
- Trigger: side outline (length): 0.87 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.88, 2013 Series Tooling, side view, not dimensioned)
- Trigger: width: 1.58 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.88, 2013 Series Tooling, side view, not dimensioned)
- Clamp block: side outline (length): 2.33 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.88, 2013 Series Tooling, side view, not dimensioned)
- Clamp block: width: 1.58 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.88, 2013 Series Tooling, side view, not dimensioned)
- Knurled screw: largest diameter: 0.42 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.88, 2013 Series Tooling, side view, not dimensioned)
- Base: largest diameter: 3.50 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.88, 2013 Series Tooling, side view, not dimensioned)
- Built from the catalog's 2013 drawing (p.88): side view and top view. Head to the left (-x), its axis tilted 10 deg (rising toward the nose); y = 0 at the base's bottom, z = 0 on the nose axis; x = 0 at the head housing's front face on the axis, the x map running through the 8.05's two ends (8.05 x cos 10 deg apart).
- The head (nose, housing, adapter, deflector) is turned about the head axis; the housing at the .79, which the top view draws as its half width.
- Only the 2013's stem deflector is modelled (the tube drawn dotted, ending at the 8.05); the 2013B and 2013V collectors drawn over it (8.81, 9.57) are omitted and that region is left out of the silhouette check.
- The base's diameter is not printed: it is scaled from the side view's width (3.40 in). No view draws the grip's, trigger's or clamp block's width: they take the head housing's diameter, the larger shape kept.
- The air swivel is drawn only in the top view (its end 3.41 from the nose axis, outside the base's circle); no view gives its height, so it is not modelled. The 3.41, 1.10 and .79 serve as the top view's z stations.
- Not modelled: the swivel, the collectors, the jaws and internals.
- The 2013 Series Tooling, top view is read for sizes but not silhouette-checked: it is a top view (looking down on the head), not a front view; it is read for the widths across (the head housing at the .79, the z stations from the 3.41, 1.10 and .79) and is not silhouette-checked.
Not modelled
Everything it installs2 fastener groups
Other brands' equivalents1 statement
- Gage Bilt says GB704 replaces 2013 (Huck) Gage Bilt 2017 p.106 ↗
Gage Bilt's cross-reference lists GB704 (installation tool) for 2013.
Sources3
- Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.80, Model 2013, Standard Inline & Offset Nose Assemblies ↗
- Model 2013, Standard Inline & Offset Nose Assemblies (1/8", 5/32" and 3/16" columns).
- Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.82, Model 2013, Standard Inline & Offset Nose Assemblies ↗
- Model 2013, Standard Inline & Offset Nose Assemblies (1/8", 5/32" and 3/16" columns).
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.106, Other - Gage Bilt Cross Reference, page 1 ↗
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Published dimensions12 · for envelope CAD
Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.