← Tooling compatibility finder
99-1335
99-1335 nose assembly · Nose / pulling head · Huck · Standard
99-1335 installs HuckMAX™ blind rivet -4, -5, -6 on a 2013.
Catalog noteDetails
Everything it installs2 fastener groups
HuckMAX™ blind rivet -4, -5, -6, per the Huck catalog
- 99-1335(-4, -5, -6)on2013Huck 2010 catalog p.80 ↗
HUCK-CLINCH® blind rivet -4, -5, -6, per the Huck catalog
- 99-1335(-4, -5, -6)on2013Huck 2010 catalog p.82 ↗
Other brands' equivalents1 statement
- Gage Bilt says 456MAX-749-35 replaces 99-1335 (Huck) Gage Bilt 2017 p.142 ↗
Gage Bilt's cross-reference lists 456MAX-749-35 (nose assembly) for 99-1335.
Sources3
- Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.80, Model 2013, Standard Inline & Offset Nose Assemblies ↗
- Model 2013, Standard Inline & Offset Nose Assemblies (1/8", 5/32" and 3/16" columns).
- Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.82, Model 2013, Standard Inline & Offset Nose Assemblies ↗
- Model 2013, Standard Inline & Offset Nose Assemblies (1/8", 5/32" and 3/16" columns).
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.142, Other - Gage Bilt Cross Reference, page 37 ↗
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Published dimensions3 · for envelope CAD
| Feature | Value | As printed | Source |
|---|---|---|---|
| Length from tool face(A, Figure 4 (p.80)) | 3.23 in | 3.23 Same values in the 1/8", 5/32" and 3/16" tables. | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.80, Nose Assembly Specifications ↗ |
| Nose diameter(B, Figure 4 (p.80)) | 0.74 in | 0.74 Same values in the 1/8", 5/32" and 3/16" tables. | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.80, Nose Assembly Specifications ↗ |
| Centerline to edge(C, Figure 4 (p.80)) | 0.37 in | 0.37 Same values in the 1/8", 5/32" and 3/16" tables. | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.80, Nose Assembly Specifications ↗ |
Only dimensions a document prints are listed, with the feature each one measures. None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.
Next · 3 Quote
Put the tool on the quote
Add to quote puts this PN on the one quote with its citation. Tooling needs no lot traceability.