← Tooling compatibility finder
456MAX-749-35
456MAX-749-35 straight nose assembly (front end ejecting) · Nose / pulling head · Gage Bilt · Standard
456MAX-749-35 installs CherryMAX® -6 on a GB704.
Catalog noteDetails
Traced from 1 manufacturer view, with published dimensions held fixed. Other shapes and unseen depths are inferred.
Built from 3 printed dimensions, 5 scaled from the figure.Details
Reference reconstruction traced from manufacturer views and constrained by printed dimensions. Undimensioned shapes and depths are inferred and labelled; omitted features mean this is not a guaranteed clearance boundary. NOT a manufacturing model or manufacturer CAD. Jaws and internal parts are not modelled. Verify fit and clearance against current manufacturer data and the physical tool.
- 3.42 (86.7 mm) Tip to the jam nut's back face · Gage Bilt 456MAX-749-35 nose assembly data sheet (Rev. 9/16), p.1, Nose assembly data sheet, side view
- .28 (7 mm) (2) Tip to the end of the anvil holder's reduced front · Gage Bilt 456MAX-749-35 nose assembly data sheet (Rev. 9/16), p.1, Nose assembly data sheet, side view
- Ø.75 (19.1 mm) Body diameter · Gage Bilt 456MAX-749-35 nose assembly data sheet (Rev. 9/16), p.1, Nose assembly data sheet, end view
Scaled from the catalog figure, not dimensioned
- Anvil: largest diameter: 0.38 in (scaled from Gage Bilt 456MAX-749-35 nose assembly data sheet (Rev. 9/16) p.1, side view, not dimensioned)
- Anvil holder: largest diameter: 0.75 in (scaled from Gage Bilt 456MAX-749-35 nose assembly data sheet (Rev. 9/16) p.1, side view, not dimensioned)
- Jam nut: across flats: 0.83 in (scaled from Gage Bilt 456MAX-749-35 nose assembly data sheet (Rev. 9/16) p.1, side view, not dimensioned)
- Collet bolt thread: crest spacing (as drawn; not a thread specification): 0.05 in (scaled from Gage Bilt 456MAX-749-35 nose assembly data sheet (Rev. 9/16) p.1, side view, not dimensioned)
- Collet bolt end: largest diameter: 0.69 in (scaled from Gage Bilt 456MAX-749-35 nose assembly data sheet (Rev. 9/16) p.1, side view, not dimensioned)
- Built from the Gage Bilt data sheet's side and end views (rendered images). Part names follow its parts list: anvil, anvil holder, jam nut, collet bolt.
- The end view is read for sizes but not silhouette-checked: the end view's jam nut is drawn as an irregular hex (a render); the end view gives the hex's corners and flats only.
Not modelled
Everything it installs1 fastener group
CherryMAX® (GB704 Nose Assembly Selection Chart) -6, per the Gage Bilt catalog
Other brands' equivalents2 statements
- Gage Bilt says 456MAX-749-35 replaces 99-1335 (Huck) Gage Bilt 2017 p.142 ↗
Gage Bilt's cross-reference lists 456MAX-749-35 (nose assembly) for 99-1335.
- Gage Bilt says 456MAX-749-35 replaces 99-3442 (Huck) Gage Bilt 2017 p.149 ↗
Gage Bilt's cross-reference lists 456MAX-749-35 (nose assembly) for 99-3442.
Sources3
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.41, GB704 Nose Assembly Selection Chart ↗
- GB704 chart; note 2: "installs 1/8", 5/32", and 3/16" diameters". The chart names CherryMAX®, not Allmax® or HuckMAX®.
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.142, Other - Gage Bilt Cross Reference, page 37 ↗
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.149, Other - Gage Bilt Cross Reference, page 44 ↗
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Published dimensions4 · for envelope CAD
| Feature | Value | As printed | Source |
|---|---|---|---|
| Length from tool face | 3.5 in | Not printed as a number. Read from the part number: "-35" = 3.5 in. by the chart's note "The last 2 digits of the nose assembly represents the length the nose extends from the tool i.e. -20 = 2.0 inches" (note on this chart, PDF p.41). The same catalog draws 456MAX-701-17 at 1.75 in., so the rule is approximate. | Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.41, GB704 Nose Assembly Selection Chart ↗ |
| As drawn (feature not labeled) | 3.42 in | 3.42 (86.7 mm) Side view: the tip to the jam nut's back face. The mm value differs: 3.42 in is 86.9 mm, the sheet prints 86.7; the model uses the inch value. | Gage Bilt 456MAX-749-35 nose assembly data sheet (Rev. 9/16), p.1, Nose assembly data sheet, side view ↗ |
| As drawn (feature not labeled) | 0.28 in | .28 (7 mm) (2) Side view: the tip to the end of the anvil holder's reduced front. | Gage Bilt 456MAX-749-35 nose assembly data sheet (Rev. 9/16), p.1, Nose assembly data sheet, side view ↗ |
| Nose diameter | 0.75 in | Ø.75 (19.1 mm) | Gage Bilt 456MAX-749-35 nose assembly data sheet (Rev. 9/16), p.1, Nose assembly data sheet, end view ↗ |
Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.
On the floor:Low clearance puller finder
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.