← Tooling compatibility finder

99-1334

99-1334 nose assembly · Nose / pulling head · Huck · Right angle

99-1334 installs HuckMAX™ blind rivet -4, -5, -6 on a Model 2013.

Catalog noteDetails
Figure 3; 0 flats (Nose Assembly Specifications).

3D model not available: not enough printed dimensions: head width not printed. 3D library

Everything it installs2 fastener groups

HuckMAX™ blind rivet -4, -5, -6, per the Huck catalog

HUCK-CLINCH® blind rivet -4, -5, -6, per the Huck catalog

Other brands' equivalents1 statement
Sources3
  1. Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.80, Model 2013, Standard Inline & Offset Nose Assemblies ↗
    • Model 2013, Standard Inline & Offset Nose Assemblies (1/8", 5/32" and 3/16" columns).
  2. Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.82, Model 2013, Standard Inline & Offset Nose Assemblies ↗
    • Model 2013, Standard Inline & Offset Nose Assemblies (1/8", 5/32" and 3/16" columns).
  3. Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.142, Other - Gage Bilt Cross Reference, page 37 ↗

Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.

Published dimensions4 · for envelope CAD
FeatureValueAs printedSource
Head height (tip to back)(A, Figure 3 (p.80))3 in3.00

Figure 3 draws A from the nose tip to the top of the head at the fastener. It draws the tool body behind the head rising above that line and prints no height for it. Same values in the 1/8", 5/32" and 3/16" tables.

Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.80, Nose Assembly Specifications ↗
As drawn (feature not labeled)(B, Figure 3 (p.80))0.32 in.32

Figure 3 draws B from the nose centreline to the side of the nose barrel. Same values in the 1/8", 5/32" and 3/16" tables.

Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.80, Nose Assembly Specifications ↗
Work surface to tool body(C, Figure 3 (p.80))1.19 in1.19

Same values in the 1/8", 5/32" and 3/16" tables.

Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.80, Nose Assembly Specifications ↗
Head reach (tool face to far side)(D, Figure 3 (p.80))5.38 in5.38

Same values in the 1/8", 5/32" and 3/16" tables.

Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.80, Nose Assembly Specifications ↗

Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.

On the floor:Low clearance puller finder

Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers

Next step

Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

Find tooling for a part number →Tooling shop →