← Tooling compatibility finder
456MAX-704-54RA
456MAX-704-54RA right angle nose assembly (pulls 1/8", 5/32" and 3/16") · Nose / pulling head · Gage Bilt · Right angle
456MAX-704-54RA installs CherryMAX®, Allmax®, HuckMAX® -4, -5, -6 on a GB704.
Catalog noteDetails
Traced from 2 manufacturer views, with published dimensions held fixed. Other shapes and unseen depths are inferred.
Built from 5 printed dimensions, 11 scaled from the figure.Details
Reference reconstruction traced from manufacturer views and constrained by printed dimensions. Undimensioned shapes and depths are inferred and labelled; omitted features mean this is not a guaranteed clearance boundary. NOT a manufacturing model or manufacturer CAD. Jaws and internal parts are not modelled. Verify fit and clearance against current manufacturer data and the physical tool.
- 5.22 (132.6 mm) The head's far side to the mount nut's face · Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.43, CherryMAX®, Allmax®, HuckMAX® Nose Assemblies
- 3.48 (88.4 mm) Tip to the top of the jaw cover · Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.43, CherryMAX®, Allmax®, HuckMAX® Nose Assemblies
- .81 (20.6 mm) Head width (front view) · Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.43, CherryMAX®, Allmax®, HuckMAX® Nose Assemblies
- 2.38 (60.5 mm) Tip to the top of the arm at the head · Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.43, CherryMAX®, Allmax®, HuckMAX® Nose Assemblies
- 1.28 (32.5 mm) Tip to the underside of the arm · Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.43, CherryMAX®, Allmax®, HuckMAX® Nose Assemblies
Scaled from the catalog figure, not dimensioned
- Arm outline (side view): 4.57 in (scaled from Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages) p.43, right angle nose figure, not dimensioned)
- Jaw cover (side view outline; width from the front view): 0.53 in (scaled from Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages) p.43, right angle nose figure, not dimensioned)
- Side cheeks beside the jaw cover (front view): 0.65 in (scaled from Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages) p.43, right angle nose figure, not dimensioned)
- Mount bushing diameter: 0.91 in (scaled from Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages) p.43, right angle nose figure, not dimensioned)
- Mount thread (band), nut side: 0.71 in (scaled from Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages) p.43, right angle nose figure, not dimensioned)
- Mount nut across flats: 0.85 in (scaled from Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages) p.43, right angle nose figure, not dimensioned)
- Mount thread (band), tool side: 0.74 in (scaled from Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages) p.43, right angle nose figure, not dimensioned)
- Fastener axis from the head's far side: 0.43 in (scaled from Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages) p.43, right angle nose figure, not dimensioned)
- Tip nut across flats: 0.71 in (scaled from Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages) p.43, right angle nose figure, not dimensioned)
- Tip housing and nub (outline): 0.65 in (scaled from Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages) p.43, right angle nose figure, not dimensioned)
- Frame holes (side view): largest diameter: 0.46 in (scaled from Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages) p.43, right angle nose figure, not dimensioned)
- Part names follow the Gage Bilt 456MAX-704-54RA data sheet's parts list where the figure shows them: frame, deflector, sleeve assembly (the tip housing), jam nut.
- Fastener axis: the tip housing's axis, vertical, near the head's far side; the tip points down (-y) as the figure draws it. Tool axis: y = 0 through the mount.
Not modelled
- The arm's three holes and the mount's tab in the arm's slot (not cut); jaws. The jaw cover's rounded front profile is digitized in 1-pixel axial bands.
Everything it installs1 fastener group
CherryMAX®, Allmax®, HuckMAX® (NAS9301-9312, M7885, BACR15FP/FR, BACR15GF/GK) -4, -5, -6, per the Gage Bilt catalog
- 456MAX-704-54RA(-4, -5, -6)onGB704Gage Bilt 2017 p.43 ↗
Other brands' equivalents2 statements
- Gage Bilt says 456MAX-704-54RA replaces 99-1334 (Huck) Gage Bilt 2017 p.142 ↗
Gage Bilt's cross-reference lists 456MAX-704-54RA (nose assembly - rt. angle) for 99-1334.
- Gage Bilt says 456MAX-704-54RA replaces H753A-456 (Cherry) Gage Bilt 2017 p.156 ↗
Gage Bilt's cross-reference lists 456MAX-704-54RA (nose assembly - rt. angle) for H753A-456.
Sources3
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.43, CherryMAX®, Allmax®, HuckMAX® Nose Assemblies ↗
- "Pulls all 3" (1/8", 5/32", 3/16").
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.142, Other - Gage Bilt Cross Reference, page 37 ↗
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.156, Other - Gage Bilt Cross Reference, page 51 ↗
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Published dimensions5 · for envelope CAD
| Feature | Value | As printed | Source |
|---|---|---|---|
| Head width | 0.81 in | .81 (20.6 mm) | Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.43, CherryMAX®, Allmax®, HuckMAX® Nose Assemblies ↗ |
| Head reach (tool face to far side) | 5.22 in | 5.22 (132.6 mm) | Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.43, CherryMAX®, Allmax®, HuckMAX® Nose Assemblies ↗ |
| Head height (tip to back) | 3.48 in | 3.48 (88.4 mm) | Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.43, CherryMAX®, Allmax®, HuckMAX® Nose Assemblies ↗ |
| As drawn (feature not labeled) | 2.38 in | 2.38 (60.5 mm) | Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.43, CherryMAX®, Allmax®, HuckMAX® Nose Assemblies ↗ |
| As drawn (feature not labeled) | 1.28 in | 1.28 (32.5 mm) Drawn vertically from the tip up to the underside of the arm. | Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.43, CherryMAX®, Allmax®, HuckMAX® Nose Assemblies ↗ |
Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.
On the floor:Low clearance puller finder
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.