Offset Huck nose assemblies
Offset noses in the Huck installation equipment catalog, with the centreline to edge distance it prints for each. That distance is drawn to the offset edge of the nose only.
| Nose or head | Dia. | Centreline to edge, in. | Catalog |
|---|---|---|---|
| 99-1333 | -4, -5, -6 | 0.19 | Huck tool catalog 2010 p.80 |
| 99-1336 | -4, -5, -6 | 0.25 | Huck tool catalog 2010 p.80 |
| 99-3703S | -5 | 0.37 | Huck tool catalog 2010 p.50 |
| 99-3703S-1 | -5 | 0.37 | Huck tool catalog 2010 p.50 |
| 99-3704 | -6 | 0.37 | Huck tool catalog 2010 p.50 |
| 99-3704-1 | -6 | 0.37 | Huck tool catalog 2010 p.50 |
| 99-3705 | -8 | 0.37 | Huck tool catalog 2010 p.50 |
| 99-3705-1 | -8 | 0.37 | Huck tool catalog 2010 p.50 |
| 99-1720DG | -10 | 0.5 | Huck tool catalog 2010 p.51 |
| 99-1756DG | -12 | 0.51 | Huck tool catalog 2010 p.51 |
Each value is drawn to one edge of the nose only, the offset edge. The note under each nose below says what its figure draws.
Compare a nose with your own clearance →
The aircraft's structural repair manual and the manufacturer's installation instructions govern. The tool manufacturer's data sheet governs the tool's dimensions.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Huck tooling, for Huck-made parts
2OffsetThe nose mounts in line with the riveter. No document on file prints the riveter's length behind it.
- Nose length, in line with the riveter
- 3.38 in (printed 3.38) Huck tool catalog 2010 p.80
- Fastener centreline to one edge of the nose
- 0.25 in (printed .25) Huck tool catalog 2010 p.80Figure 2 draws B from the fastener centreline to the offset edge of the nose. It covers that one edge only. Same values in the 1/8", 5/32" and 3/16" tables.
On 2013. Huck tool catalog 2010 p.80
Request this tool: buy, rent or repair →- Nose length, in line with the riveter
- 4.38 in (printed 4.38) Huck tool catalog 2010 p.80
- Fastener centreline to one edge of the nose
- 0.19 in (printed .19) Huck tool catalog 2010 p.80Figure 2 draws B from the fastener centreline to the offset edge of the nose. It covers that one edge only. Same values in the 1/8", 5/32" and 3/16" tables.
On 2013. Huck tool catalog 2010 p.80
Request this tool: buy, rent or repair →
Huck tooling, names the standard (any maker)
8OffsetThe nose mounts in line with the riveter. No document on file prints the riveter's length behind it.
- Nose length, in line with the riveter
- 2.55 in (printed 2.55) Huck tool catalog 2010 p.50
- Fastener centreline to one edge of the nose
- 0.37 in (printed .37) Huck tool catalog 2010 p.50Figure 4 draws C from the jaw centreline to the top edge of the head. It covers that one edge only; the head is B wide. 5/32" table
On 244 with adapter 128279. On 245, 255 with adapter 119400-1, 118362. On 2480 with adapter 128279. Huck tool catalog 2010 p.46
Request this tool: buy, rent or repair →- Nose length, in line with the riveter
- 2.59 in (printed 2.59) Huck tool catalog 2010 p.50
- Fastener centreline to one edge of the nose
- 0.37 in (printed .37) Huck tool catalog 2010 p.50Figure 4 draws C from the jaw centreline to the top edge of the head. It covers that one edge only; the head is B wide. 3/16" table
On 244 with adapter 128279. On 245, 255 with adapter 119400-1, 118362. On 2480 with adapter 128279. Huck tool catalog 2010 p.46
Request this tool: buy, rent or repair →- Nose length, in line with the riveter
- 2.59 in (printed 2.59) Huck tool catalog 2010 p.50
- Fastener centreline to one edge of the nose
- 0.37 in (printed .37) Huck tool catalog 2010 p.50Figure 4 draws C from the jaw centreline to the top edge of the head. It covers that one edge only; the head is B wide. 1/4" table
On 245, 255 with adapter 119400-1, 118362. Huck tool catalog 2010 p.46
Request this tool: buy, rent or repair →- Nose length, in line with the riveter
- 3.33 in (printed 3.33) Huck tool catalog 2010 p.51
- Fastener centreline to one edge of the nose
- 0.5 in (printed .50) Huck tool catalog 2010 p.51Figure 4 draws C from the jaw centreline to the top edge of the head. It covers that one edge only; the head is B wide. 5/16" table
On 245, 255 with adapter 122134. Huck tool catalog 2010 p.46
Request this tool: buy, rent or repair →- Nose length, in line with the riveter
- 3.34 in (printed 3.34) Huck tool catalog 2010 p.51
- Fastener centreline to one edge of the nose
- 0.51 in (printed .51) Huck tool catalog 2010 p.51Figure 4 draws C from the jaw centreline to the top edge of the head. It covers that one edge only; the head is B wide. 3/8" table
On 246, 256 with adapter 122134. Huck tool catalog 2010 p.47
Request this tool: buy, rent or repair →- Nose length, in line with the riveter
- 3.36 in (printed 3.36) Huck tool catalog 2010 p.50
- Fastener centreline to one edge of the nose
- 0.37 in (printed .37) Huck tool catalog 2010 p.50Figure 4 draws C from the jaw centreline to the top edge of the head. It covers that one edge only; the head is B wide. 5/32" table
Figure 4; 0 flats (Nose Assembly Specifications). The Huck catalog prints this nose as "99-3703S-1" in its nose lists (p.46, p.47, p.48) and as "99-3703-1S" in the p.50 dimension table. The dimensions here are the p.50 row printed as 99-3703-1S.
On 244 with adapter 128279. On 245, 255 with adapter 119400-1, 118362. On 2480 with adapter 128279. Huck tool catalog 2010 p.46
Request this tool: buy, rent or repair →- Nose length, in line with the riveter
- 3.4 in (printed 3.40) Huck tool catalog 2010 p.50
- Fastener centreline to one edge of the nose
- 0.37 in (printed .37) Huck tool catalog 2010 p.50Figure 4 draws C from the jaw centreline to the top edge of the head. It covers that one edge only; the head is B wide. 3/16" table
On 244 with adapter 128279. On 245, 255 with adapter 119400-1, 118362. On 2480 with adapter 128279. Huck tool catalog 2010 p.46
Request this tool: buy, rent or repair →- Nose length, in line with the riveter
- 3.4 in (printed 3.40) Huck tool catalog 2010 p.50
- Fastener centreline to one edge of the nose
- 0.37 in (printed .37) Huck tool catalog 2010 p.50Figure 4 draws C from the jaw centreline to the top edge of the head. It covers that one edge only; the head is B wide. 1/4" table
On 245, 255 with adapter 119400-1, 118362. Huck tool catalog 2010 p.46
Request this tool: buy, rent or repair →
Find the tool for a part numberIdentify a lockbolt from its tail
Next