← Tooling compatibility finder
99-3703S
99-3703S nose assembly · Nose / pulling head · Huck · Offset
99-3703S installs NAS shear pull-type lockbolt -5 on a 244, 245, 255 or 2480 with adapter 128279, 119400-1 or 118362.
Catalog noteDetails
Everything it installs1 fastener group
NAS shear pull-type lockbolt (pin and collar) -5, per the Huck catalog
Other brands' equivalents1 statement
- Gage Bilt says NASS05-206G-25O replaces 99-3703S (Huck) Gage Bilt 2017 p.149 ↗
Gage Bilt's cross-reference lists NASS05-206G-25O (nose assembly - offset) for 99-3703S.
Sources4
- Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.46, Model 244, Standard Inline & Offset Nose Assemblies ↗
- Model 244, Standard Inline & Offset Nose Assemblies. "Requires Adapter Part Number 128279. No Stroke Limiter Needed".
- Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.46, Model 245/255, Standard Inline & Offset Nose Assemblies ↗
- Model 245/255, Standard Inline & Offset Nose Assemblies. "Requires Adapter Part Number 119400-1 and Stroke Limiter Part Number 118362".
- Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.47, Model 2480/A2480, Standard Inline & Offset Nose Assemblies ↗
- Model 2480/A2480, Standard Inline & Offset Nose Assemblies. "Requires Adapter Part Number 128279. No Stroke Limiter Needed".
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.149, Other - Gage Bilt Cross Reference, page 44 ↗
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Published dimensions5 · for envelope CAD
| Feature | Value | As printed | Source |
|---|---|---|---|
| Max stroke (as drawn)(A, Figure 4 (p.51)) | 1.37 in | 1.37 5/32" table | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 5/32" table ↗ |
| Head width(B, Figure 4 (p.51)) | 0.91 in | 0.91 5/32" table | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 5/32" table ↗ |
| Centerline to edge(C, Figure 4 (p.51)) | 0.37 in | 0.37 5/32" table | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 5/32" table ↗ |
| Offset head height(D, Figure 4 (p.51)) | 1 in | 1 5/32" table | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 5/32" table ↗ |
| Length from tool face(E, Figure 4 (p.51)) | 2.55 in | 2.55 5/32" table | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 5/32" table ↗ |
Only dimensions a document prints are listed, with the feature each one measures. None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.
Next · 3 Quote
Put the tool on the quote
Add to quote puts this PN on the one quote with its citation. Tooling needs no lot traceability.