← Tooling compatibility finder

NASS05-206G-25O

NASS05-206G-25O (nose assembly - offset) · Nose / pulling head · Gage Bilt · Offset

No fastener installation table on file names this part number.

Catalog noteDetails
Named only in Gage Bilt's cross-reference, as its PN for 99-3703S.

3D model not available: dimensions not published. 3D library

Other brands' equivalents1 statement
  • Gage Bilt says NASS05-206G-25O replaces 99-3703S (Huck) Gage Bilt 2017 p.149 ↗

    Gage Bilt's cross-reference lists NASS05-206G-25O (nose assembly - offset) for 99-3703S. Gage Bilt's GB731NASK chart (PDF p.57) gives 5/32" shear lockbolts NASS05 noses and 5/32" tension lockbolts NAST05 noses.

Sources1
  1. Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.149, Other - Gage Bilt Cross Reference, page 44 ↗

Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.

Published dimensions0 · for envelope CAD

No dimensions are printed for this item in the catalogs on file.

Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.

On the floor:Low clearance puller finder

Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers

Next step

Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

Find tooling for a part number →Tooling shop →