← Tooling compatibility finder
255
Model 255 pneudraulic installation tool · Installation tool · Huck
255 installs NAS shear pull-type lockbolt -5, -6, -8, -10 with nose 99-2552S, 99-2553S, 99-2558, 99-2559, 99-2954, 99-2564, 99-2565, 99-2952, 99-2567, 99-2568 or 99-2953.
Traced from 2 manufacturer views, with published dimensions held fixed. Other shapes and unseen depths are inferred.
Built from 7 printed dimensions, 29 scaled from the figure.Details
Reference reconstruction traced from manufacturer views and constrained by printed dimensions. Undimensioned shapes and depths are inferred and labelled; omitted features mean this is not a guaranteed clearance boundary. NOT a manufacturing model or manufacturer CAD. Jaws and internal parts are not modelled. Verify fit and clearance against current manufacturer data and the physical tool.
- 7.091 / 180.11 Nose fitting's front face to the stem deflector's end, along the head axis · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.95, 255 Series Tooling drawing
- .959 / 24.36 Head axis to the head's top line · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.95, 255 Series Tooling drawing
- 4° Head axis tilt · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.95, 255 Series Tooling drawing
- 14.86 / 377.59 Top of the head to the base's bottom · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.95, 255 Series Tooling drawing
- 6.02 / 153 Base height · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.95, 255 Series Tooling drawing
- Ø4.610 / 118.00 Base diameter · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.95, 255 Series Tooling drawing
- 3.957 / 100.51 Base axis to the air inlet's far end (bottom view) · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.95, 255 Series Tooling drawing
Scaled from the catalog figure, not dimensioned
- Nose fitting: across flats: 1.31 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, side view, not dimensioned)
- Head collar: largest diameter: 1.92 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, side view, not dimensioned)
- Head cylinder: largest diameter: 1.92 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, side view, not dimensioned)
- End cap: largest diameter: 1.92 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, side view, not dimensioned)
- Stem deflector: largest diameter: 0.96 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, side view, not dimensioned)
- Stem deflector cut: side outline (length): 0.72 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, side view, not dimensioned)
- Stem deflector cut: end view outline (widest): 1.03 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, front view, not dimensioned)
- Head mount block: side outline (length): 3.72 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, side view, not dimensioned)
- Head mount block: end view outline (widest): 2.38 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, front view, not dimensioned)
- Slotted plate: side outline (length): 1.64 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, side view, not dimensioned)
- Slotted plate: end view outline (widest): 2.38 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, front view, not dimensioned)
- Grip top: side outline (length): 2.83 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, side view, not dimensioned)
- Grip top: width: 1.14 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, front view, not dimensioned)
- Grip: side outline (length): 3.84 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, side view, not dimensioned)
- Grip: width: 1.09 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, front view, not dimensioned)
- Grip foot: side outline (length): 2.17 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, side view, not dimensioned)
- Grip foot: end view outline (widest): 3.08 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, front view, not dimensioned)
- Trigger: side outline (length): 0.76 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, side view, not dimensioned)
- Trigger: width: 0.40 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, front view, not dimensioned)
- Clamp block: side outline (length): 0.64 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, side view, not dimensioned)
- Clamp block: width: 1.31 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, front view, not dimensioned)
- Base top cover: side outline (length): 4.05 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, side view, not dimensioned)
- Base top cover: end view outline (widest): 4.99 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, front view, not dimensioned)
- Base: largest diameter: 4.67 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, side view, not dimensioned)
- Base cover: largest diameter: 4.61 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, side view, not dimensioned)
- Air inlet housing: side outline (length): 1.56 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, side view, not dimensioned)
- Air inlet housing: end view outline (widest): 0.74 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, front view, not dimensioned)
- Air inlet swivel: side outline (length): 1.30 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, side view, not dimensioned)
- Air inlet swivel: end view outline (widest): 1.07 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.95, 255 Series Tooling, front view, not dimensioned)
- Built from the catalog's 255 drawing (p.95): side view, front view and the base's bottom view. Head to the left (-x), its axis tilted 4 deg (rising toward the nose); y = 0 at the base's bottom, x = 0 and z = 0 on the base's axis.
- The head's parts are turned about the head axis the side view draws: the head cylinder is drawn concentric with it, the .959 its radius.
- Widths across come from the front view where it draws a part's outline; where the views do not separate parts that stand behind one another the larger drawn width is kept, and each part says so.
- The front view draws the head as one circle about the nose axis (no tilt, no hex on the nose fitting): the head follows the side view and its printed values, and is left out of the front view's silhouette check.
- The air inlet is hidden behind the base in the side view: its position along x comes from the bottom view and its printed distance from the base axis.
- The head's diameter label on p.95 reads Ø4.610 (the base's value, a misprint): it is kept with the drawing's dimensions but not used; the head cylinder is drawn at the .959 (Ø1.918, which the label's extension lines agree with).
- The angled swivel fitting is placed along the inlet's centre line (65 deg below the side view's x direction in the bottom view) with its end on the 3.957.
- Not modelled: the base's flutes (the round crest outline kept), the screws drawn on the head mount block and the grip, the slots, the jaws and internals.
Not modelled
Everything it installs1 fastener group
NAS shear pull-type lockbolt (pin and collar) -5, -6, -8, -10, per the Huck catalog
- 99-2552S99-2553S(-5)on245255Huck 2010 catalog p.46 ↗
- 99-3703S99-3703S-1(-5)on245255+ adapter119400-1118362Huck 2010 catalog p.46 ↗
- 99-255899-255999-2954(-6)on245255Huck 2010 catalog p.46 ↗
- 99-370499-3704-1(-6)on245255+ adapter119400-1118362Huck 2010 catalog p.46 ↗
- 99-256499-256599-2952(-8)on245255Huck 2010 catalog p.46 ↗
- 99-370599-3705-1(-8)on245255+ adapter119400-1118362Huck 2010 catalog p.46 ↗
- 99-256799-256899-2953(-10)on245255Huck 2010 catalog p.46 ↗
- 99-1720DG(-10)on245255+ adapter122134Huck 2010 catalog p.46 ↗
Other brands' equivalents1 statement
- Gage Bilt says GB745 replaces 255 (Huck) Gage Bilt 2017 p.106 ↗
Gage Bilt's cross-reference lists GB745 (installation tool) for 255.
Sources2
- Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.46, Model 245/255, Standard Inline & Offset Nose Assemblies ↗
- Model 245/255, Standard Inline & Offset Nose Assemblies.
- Model 245/255, Standard Inline & Offset Nose Assemblies. "Requires Adapter Part Number 119400-1 and Stroke Limiter Part Number 118362".
- Model 245/255, Standard Inline & Offset Nose Assemblies. "Requires Adapter Part Number 122134. No Stroke Limiter Needed".
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.106, Other - Gage Bilt Cross Reference, page 1 ↗
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Published dimensions12 · for envelope CAD
| Feature | Value | As printed | Source |
|---|---|---|---|
| Stroke | 0.625 in | Stroke: .625 in | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.95, 255 Series Tooling specifications ↗ |
| Weight | 8.8 lb | Weight: 8.8 lbs | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.95, 255 Series Tooling specifications ↗ |
| Air pressure | 90 psi | Air Pressure: 90-100 psi | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.95, 255 Series Tooling specifications ↗ |
| Air consumption | 11.5 scfm | Air Consumption: 11.5 SCFM | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.95, 255 Series Tooling specifications ↗ |
| As drawn (feature not labeled) | 7.091 in | 7.091 / 180.11 Along the head axis (tilted 4°): the nose fitting's front face to the end of the stem deflector. | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.95, 255 Series Tooling drawing ↗ |
| As drawn (feature not labeled) | 0.959 in | .959 / 24.36 Perpendicular to the head axis: the head axis to the head cylinder's top line (the cylinder is drawn concentric with the axis). | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.95, 255 Series Tooling drawing ↗ |
| Angle | 4 deg | 4° The head axis from horizontal. | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.95, 255 Series Tooling drawing ↗ |
| As drawn (feature not labeled) | 4.61 in | Ø4.610 / 118.00 The head cylinder's diameter label, as printed. A misprint: it repeats the base's diameter, while its extension lines are 1.92 in. apart at the drawing's scale (2 x .959 = 1.918). Not used; the head is drawn at the .959. | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.95, 255 Series Tooling drawing ↗ |
| Tool height | 14.86 in | 14.86 / 377.59 Top of the head to the bottom of the base. As printed; 14.86 in. is 377.4 mm, the drawing's mm value differs. | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.95, 255 Series Tooling drawing ↗ |
| As drawn (feature not labeled) | 6.02 in | 6.02 / 153 Base height: the base's top to its bottom. | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.95, 255 Series Tooling drawing ↗ |
| Base diameter | 4.61 in | Ø4.610 / 118.00 The base's bottom ring. As printed; 4.61 in. is 117.1 mm, the drawing's mm value differs. | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.95, 255 Series Tooling drawing ↗ |
| As drawn (feature not labeled) | 3.957 in | 3.957 / 100.51 Bottom view: the base axis to the line touching the far end of the air inlet, along the dimension's direction. | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.95, 255 Series Tooling drawing ↗ |
Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.