← Tooling compatibility finder
99-2553S
99-2553S nose assembly · Nose / pulling head · Huck · Standard
99-2553S installs NAS shear pull-type lockbolt -5 on a 245, 255, 246, 256 or 2502.
Catalog noteDetails
Everything it installs1 fastener group
NAS shear pull-type lockbolt (pin and collar) -5, per the Huck catalog
Other brands' equivalents1 statement
- Gage Bilt says NASS05-2581-48 replaces 99-2553S (Huck) Gage Bilt 2017 p.146 ↗
Gage Bilt's cross-reference lists NASS05-2581-48 (nose assembly) for 99-2553S.
Sources4
- Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.46, Model 245/255, Standard Inline & Offset Nose Assemblies ↗
- Model 245/255, Standard Inline & Offset Nose Assemblies.
- Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.47, Model 246/56, Standard Inline & Offset Nose Assemblies ↗
- Model 246/56, Standard Inline & Offset Nose Assemblies.
- Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.47, Model 2502/A2502, Standard Inline & Offset Nose Assemblies ↗
- Model 2502/A2502, Standard Inline & Offset Nose Assemblies.
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.146, Other - Gage Bilt Cross Reference, page 41 ↗
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Published dimensions5 · for envelope CAD
| Feature | Value | As printed | Source |
|---|---|---|---|
| Reduced section length(A, Figure 2 (p.51)) | 3.8 in | 3.8 5/32" table | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 5/32" table ↗ |
| Nose diameter(B, Figure 2 (p.51)) | 0.64 in | 0.64 5/32" table | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 5/32" table ↗ |
| Centerline to edge(C, Figure 2 (p.51)) | 0.29 in | 0.29 5/32" table | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 5/32" table ↗ |
| Flat length(D, Figure 2 (p.51)) | 3.95 in | 3.95 5/32" table | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 5/32" table ↗ |
| Length from tool face(E, Figure 2 (p.51)) | 4.75 in | 4.75 5/32" table | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 5/32" table ↗ |
Only dimensions a document prints are listed, with the feature each one measures. None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.
Next · 3 Quote
Put the tool on the quote
Add to quote puts this PN on the one quote with its citation. Tooling needs no lot traceability.