← Tooling compatibility finder
246
Model 246 pneudraulic installation tool · Installation tool · Huck
246 installs NAS shear pull-type lockbolt -5, -6, -8, -10, -12 with nose 99-2552S, 99-2553S, 99-2558, 99-2559, 99-2954, 99-2564, 99-2565, 99-2952, 99-2567, 99-2568, 99-2953, 99-2570, 99-2571 or 99-2957.
Traced from 2 manufacturer views, with published dimensions held fixed. Other shapes and unseen depths are inferred.
Built from 8 printed dimensions, 29 scaled from the figure.Details
Reference reconstruction traced from manufacturer views and constrained by printed dimensions. Undimensioned shapes and depths are inferred and labelled; omitted features mean this is not a guaranteed clearance boundary. NOT a manufacturing model or manufacturer CAD. Jaws and internal parts are not modelled. Verify fit and clearance against current manufacturer data and the physical tool.
- 8.81 / 223.75 Nose fitting's front face to the stem deflector's end, along the head axis · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.93, 246 Series Tooling drawing
- .732 / 18.6 Head axis to the head's top line · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.93, 246 Series Tooling drawing
- Ø1.920 / 48.80 Head cylinder and end cap diameter · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.93, 246 Series Tooling drawing
- 4° Head axis tilt · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.93, 246 Series Tooling drawing
- 15.05 / 382.3 Top of the head to the base's bottom · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.93, 246 Series Tooling drawing
- 6.155 / 156.30 Base height · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.93, 246 Series Tooling drawing
- Ø6.125 / 155.6 Base diameter · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.93, 246 Series Tooling drawing
- 3.98 / 101.1 Base axis to the air inlet's far end (bottom view) · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.93, 246 Series Tooling drawing
Scaled from the catalog figure, not dimensioned
- Nose fitting: across flats: 1.34 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, side view, not dimensioned)
- Head collar: largest diameter: 1.46 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, side view, not dimensioned)
- Head front: largest diameter: 1.46 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, side view, not dimensioned)
- Head cylinder: largest diameter: 1.92 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, side view, not dimensioned)
- End cap: largest diameter: 1.92 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, side view, not dimensioned)
- Stem deflector: largest diameter: 1.23 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, side view, not dimensioned)
- Stem deflector cut: side outline (length): 0.89 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, side view, not dimensioned)
- Stem deflector cut: end view outline (widest): 1.32 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, front view, not dimensioned)
- Head mount block: side outline (length): 3.77 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, side view, not dimensioned)
- Head mount block: end view outline (widest): 2.41 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, front view, not dimensioned)
- Slotted plate: side outline (length): 1.46 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, side view, not dimensioned)
- Slotted plate: end view outline (widest): 2.41 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, front view, not dimensioned)
- Grip top: side outline (length): 2.89 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, side view, not dimensioned)
- Grip top: width: 1.16 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, front view, not dimensioned)
- Grip: side outline (length): 3.85 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, side view, not dimensioned)
- Grip: width: 1.11 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, front view, not dimensioned)
- Grip foot: side outline (length): 2.08 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, side view, not dimensioned)
- Grip foot: end view outline (widest): 3.89 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, front view, not dimensioned)
- Trigger: side outline (length): 0.73 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, side view, not dimensioned)
- Trigger: width: 0.42 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, front view, not dimensioned)
- Clamp block: side outline (length): 0.72 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, side view, not dimensioned)
- Clamp block: width: 1.22 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, front view, not dimensioned)
- Base top cover: side outline (length): 5.28 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, side view, not dimensioned)
- Base top cover: end view outline (widest): 6.40 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, front view, not dimensioned)
- Base: largest diameter: 6.13 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, side view, not dimensioned)
- Air inlet housing: side outline (length): 1.32 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, side view, not dimensioned)
- Air inlet housing: end view outline (widest): 0.51 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, front view, not dimensioned)
- Air inlet boss: side outline (length): 1.32 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, side view, not dimensioned)
- Air inlet boss: end view outline (widest): 0.70 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.93, 246 Series Tooling, front view, not dimensioned)
- Built from the catalog's 246 drawing (p.93): side view, front view and the base's bottom view. Head to the left (-x), its axis tilted 4 deg (rising toward the nose); y = 0 at the base's bottom, x = 0 and z = 0 on the base's axis.
- The head's parts are turned about three parallel axes the side view draws: the nose axis (nose fitting, collar, head front), the head cylinder's axis .228 below it (Ø1.920 / 2 - .732: the cylinder's top line .732 above the nose axis), and the stem deflector's, just above it.
- Widths across come from the front view where it draws a part's outline; where the views do not separate parts that stand behind one another the larger drawn width is kept, and each part says so.
- The front view draws the head as one circle about the nose axis (no tilt, no hex on the nose fitting): the head follows the side view and its printed values, and is left out of the front view's silhouette check.
- The air inlet is hidden behind the base in the side view: its position along x comes from the bottom view and its printed distance from the base axis.
- The inlet is a bar on the base's side (a square turned about 30 deg in the bottom view) with a round boss at mid height; its far corner is placed on the 3.98. The front view is drawn with its base 17.5 px shorter than the side view's and has its own vertical stations.
- Not modelled: the base's flutes (the round crest outline kept), the screws drawn on the head mount block and the grip, the slots, the jaws and internals.
Not modelled
Everything it installs1 fastener group
NAS shear pull-type lockbolt (pin and collar) -5, -6, -8, -10, -12, per the Huck catalog
- 99-2552S99-2553S(-5)on246256Huck 2010 catalog p.47 ↗
- 99-255899-255999-2954(-6)on246256Huck 2010 catalog p.47 ↗
- 99-256499-256599-2952(-8)on246256Huck 2010 catalog p.47 ↗
- 99-256799-256899-2953(-10)on246256Huck 2010 catalog p.47 ↗
- 99-1720DGC(-10)on246256+ adapter122134Huck 2010 catalog p.47 ↗
- 99-257099-257199-2957(-12)on246256Huck 2010 catalog p.47 ↗
- 99-1756DG(-12)on246256+ adapter122134Huck 2010 catalog p.47 ↗
Other brands' equivalents1 statement
- Gage Bilt says GB756 replaces 246 (Huck) Gage Bilt 2017 p.106 ↗
Gage Bilt's cross-reference lists GB756 (installation tool) for 246.
Sources2
- Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.47, Model 246/56, Standard Inline & Offset Nose Assemblies ↗
- Model 246/56, Standard Inline & Offset Nose Assemblies.
- Model 246/56, Standard Inline & Offset Nose Assemblies. "Requires Adapter Part Number 122134. No Stroke Limiter Needed".
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.106, Other - Gage Bilt Cross Reference, page 1 ↗
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Published dimensions13 · for envelope CAD
Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.