← Tooling compatibility finder
99-2567
99-2567 nose assembly · Nose / pulling head · Huck · Standard
99-2567 installs NAS shear pull-type lockbolt -10 on a Model 245, 255, 246, 256 or 2502.
Catalog noteDetails
Traced from 1 manufacturer view, with published dimensions held fixed. Other shapes and unseen depths are inferred.
Built from 5 printed dimensions, 8 scaled from the figure.Details
Reference reconstruction traced from manufacturer views and constrained by printed dimensions. Undimensioned shapes and depths are inferred and labelled; omitted features mean this is not a guaranteed clearance boundary. NOT a manufacturing model or manufacturer CAD. Jaws and internal parts are not modelled. Verify fit and clearance against current manufacturer data and the physical tool.
- 2.20 Tool face (the flange's front face) to the tip · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.51, Nose Assembly Specifications, 5/16" table
- .92 Reduced section diameter · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.51, Nose Assembly Specifications, 5/16" table
- 1.55 Reduced section length from the tip · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.51, Nose Assembly Specifications, 5/16" table
- .43 Centreline to the flat · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.51, Nose Assembly Specifications, 5/16" table
- 1.50 Flat length from the tip · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.51, Nose Assembly Specifications, 5/16" table
Scaled from the catalog figure, not dimensioned
- Mounting flange diameter: 1.65 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 2, not dimensioned)
- Mounting flange length as drawn (the figure breaks off its back): 0.73 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 2, not dimensioned)
- Larger section diameter (between the tool face and the reduced section): 1.23 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 2, not dimensioned)
- Tip face diameter: 0.43 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 2, not dimensioned)
- Tip chamfer / collar length: 0.04 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 2, not dimensioned)
- Mounting flange: hidden bore (dashed outline): 1.18 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 2, not dimensioned)
- Tip bore 1 (outer circle of the end view): diameter: 0.36 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 2 end view, not dimensioned)
- Tip bore 2 (inner circle of the end view): diameter: 0.24 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 2 end view, not dimensioned)
- The flat is drawn on top (+y); the catalog does not fix its orientation about the axis.
Not modelled
- Jaws and internals; the mounting flange's back (the drawing breaks off there) and its internal thread (dashed).
Everything it installs1 fastener group
NAS shear pull-type lockbolt (pin and collar) -10, per the Huck catalog
Other brands' equivalents0 statements
No cross-brand statement on file for these tools. Not documented is not the same as incompatible.
Sources3
- Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.46, Model 245/255, Standard Inline & Offset Nose Assemblies ↗
- Model 245/255, Standard Inline & Offset Nose Assemblies.
- Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.47, Model 246/56, Standard Inline & Offset Nose Assemblies ↗
- Model 246/56, Standard Inline & Offset Nose Assemblies.
- Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.47, Model 2502/A2502, Standard Inline & Offset Nose Assemblies ↗
- Model 2502/A2502, Standard Inline & Offset Nose Assemblies.
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Published dimensions5 · for envelope CAD
Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.
On the floor:Low clearance puller finder
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.