← Tooling compatibility finder
99-2957
99-2957 nose assembly · Nose / pulling head · Huck · Standard
99-2957 installs NAS shear pull-type lockbolt -12 on a 246, 256 or 2502.
Catalog noteDetails
Everything it installs1 fastener group
NAS shear pull-type lockbolt (pin and collar) -12, per the Huck catalog
Other brands' equivalents0 statements
No cross-brand statement on file for these tools. Not documented is not the same as incompatible.
Sources2
- Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.47, Model 246/56, Standard Inline & Offset Nose Assemblies ↗
- Model 246/56, Standard Inline & Offset Nose Assemblies.
- Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.47, Model 2502/A2502, Standard Inline & Offset Nose Assemblies ↗
- Model 2502/A2502, Standard Inline & Offset Nose Assemblies.
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Published dimensions5 · for envelope CAD
| Feature | Value | As printed | Source |
|---|---|---|---|
| Reduced section length(A, Figure 5 (p.51)) | 2.91 in | 2.91 3/8" table | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.51, Nose Assembly Specifications, 3/8" table ↗ |
| Nose diameter(B, Figure 5 (p.51)) | 1.06 in | 1.06 3/8" table | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.51, Nose Assembly Specifications, 3/8" table ↗ |
| Centerline to edge(C, Figure 5 (p.51)) | 0.34 in | 0.34 3/8" table | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.51, Nose Assembly Specifications, 3/8" table ↗ |
| As drawn (feature not labeled)(D, Figure 5 (p.51)) | 0.6 in | 0.6 3/8" table | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.51, Nose Assembly Specifications, 3/8" table ↗ |
| Length from tool face(E, Figure 5 (p.51)) | 4.35 in | 4.35 3/8" table | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.51, Nose Assembly Specifications, 3/8" table ↗ |
Only dimensions a document prints are listed, with the feature each one measures. None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next · 3 Quote
Put the tool on the quote
Add to quote puts this PN on the one quote with its citation. Tooling needs no lot traceability.