← Tooling compatibility finder
99-3705
99-3705 nose assembly · Nose / pulling head · Huck · Offset
99-3705 installs NAS shear pull-type lockbolt -8 on a 245 or 255 with adapter 119400-1 or 118362.
Catalog noteDetails
Everything it installs1 fastener group
Other brands' equivalents1 statement
- Gage Bilt says NAS08-206G-25OS replaces 99-3705 (Huck) Gage Bilt 2017 p.149 ↗
Gage Bilt's cross-reference lists NAS08-206G-25OS (nose assembly - offset) for 99-3705.
Sources2
- Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.46, Model 245/255, Standard Inline & Offset Nose Assemblies ↗
- Model 245/255, Standard Inline & Offset Nose Assemblies. "Requires Adapter Part Number 119400-1 and Stroke Limiter Part Number 118362".
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.149, Other - Gage Bilt Cross Reference, page 44 ↗
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Published dimensions5 · for envelope CAD
| Feature | Value | As printed | Source |
|---|---|---|---|
| Max stroke (as drawn)(A, Figure 4 (p.51)) | 1.41 in | 1.41 1/4" table | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 1/4" table ↗ |
| Head width(B, Figure 4 (p.51)) | 0.91 in | 0.91 1/4" table | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 1/4" table ↗ |
| Centerline to edge(C, Figure 4 (p.51)) | 0.37 in | 0.37 1/4" table | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 1/4" table ↗ |
| Offset head height(D, Figure 4 (p.51)) | 1 in | 1 1/4" table | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 1/4" table ↗ |
| Length from tool face(E, Figure 4 (p.51)) | 2.59 in | 2.59 1/4" table | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 1/4" table ↗ |
Only dimensions a document prints are listed, with the feature each one measures. None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next · 3 Quote
Put the tool on the quote
Add to quote puts this PN on the one quote with its citation. Tooling needs no lot traceability.