← Tooling compatibility finder
99-3705-1
99-3705-1 nose assembly · Nose / pulling head · Huck · Offset
99-3705-1 installs NAS shear pull-type lockbolt -8 on a Model 245 or 255 with adapter 119400-1 or 118362.
Catalog noteDetails
Traced from 1 manufacturer view, with published dimensions held fixed. Other shapes and unseen depths are inferred.
Built from 5 printed dimensions, 9 scaled from the figure.Details
Reference reconstruction traced from manufacturer views and constrained by printed dimensions. Undimensioned shapes and depths are inferred and labelled; omitted features mean this is not a guaranteed clearance boundary. NOT a manufacturing model or manufacturer CAD. Jaws and internal parts are not modelled. Verify fit and clearance against current manufacturer data and the physical tool.
- 3.40 Tool face (the flange's back face) to the front of the head · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 1/4" table
- 1.42 Max stroke: the dashed outline's back to the front of the head · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 1/4" table
- .91 Head width (end view) · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 1/4" table
- .37 Jaw centre line to the top of the head · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 1/4" table
- 1.63 Jaw centre line down to the top of the shank, as Figure 4 draws it · Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 1/4" table
Scaled from the catalog figure, not dimensioned
- Mounting flange diameter: 1.65 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 4, not dimensioned)
- Shank height (top at the D line) and end-view width: 1.28 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 4, not dimensioned)
- Head and arm outline (side view): 1.51 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 4, not dimensioned)
- Dashed (phantom) outline behind the head: 0.69 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 4, not dimensioned)
- Shank slot (side view outline; cut through the width): 1.01 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 4, not dimensioned)
- Pin in the slot: diameter (taken across the shank's width): 0.36 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 4, not dimensioned)
- Head block section (end view): top flat width: 0.54 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 4 end view, not dimensioned)
- Anvil: outside / bore diameter (end view circles): 0.40 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 4 end view, not dimensioned)
- Raised lip on the head's top: 0.05 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 4, not dimensioned)
- Figure 4 draws D from the jaw centre line down to the top of the shank (its lower extension line is the shank's top edge), not to the tool centre line, which it does not draw: the model follows the drawing, so the jaw (fastener) axis is 2.260 in above the tool axis here (D plus the shank's scaled half height), parallel to it through the head. Confirm the offset with Huck before relying on it.
- The dashed outline behind the head (the A max-stroke dimension's extent) is modelled as its own translucent part, STROKE SPACE: keep it clear.
Not modelled
- The pocket in the arm (the end view's U outline; not cut), the shank's fillets at the flange and its chamfered front bottom corner, jaws, collet and drawbar. The clearance envelope keeps the slot filled and the head square (the larger shape); the reference model cuts the slot and shapes the head as the end view draws it.
Everything it installs1 fastener group
Other brands' equivalents1 statement
- Gage Bilt says NAS08-206G-34OS replaces 99-3705-1 (Huck) Gage Bilt 2017 p.149 ↗
Gage Bilt's cross-reference lists NAS08-206G-34OS (nose assembly - offset) for 99-3705-1.
Sources2
- Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.46, Model 245/255, Standard Inline & Offset Nose Assemblies ↗
- Model 245/255, Standard Inline & Offset Nose Assemblies. "Requires Adapter Part Number 119400-1 and Stroke Limiter Part Number 118362".
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.149, Other - Gage Bilt Cross Reference, page 44 ↗
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Published dimensions5 · for envelope CAD
Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.
On the floor:Low clearance puller finderOffset Huck nose assemblies: dimensions
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.