← Tooling compatibility finder
GB745
GB745 (installation tool) · Installation tool · Gage Bilt
No fastener installation table on file names this part number.
Catalog noteDetails
Traced from 2 manufacturer views, with published dimensions held fixed. Other shapes and unseen depths are inferred.
Built from 13 printed dimensions, 29 scaled from the figure.Details
Reference reconstruction traced from manufacturer views and constrained by printed dimensions. Undimensioned shapes and depths are inferred and labelled; omitted features mean this is not a guaranteed clearance boundary. NOT a manufacturing model or manufacturer CAD. Jaws and internal parts are not modelled. Verify fit and clearance against current manufacturer data and the physical tool.
- 8.48 (215.4 mm) Head length along its axis, adapter hex's front to the deflector's tip · Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24), p.1, GB745 front and side views
- 5.74 (145.8 mm) Adapter hex's front to the deflector collar's back, along the head axis · Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24), p.1, GB745 front and side views
- 2.78 (70.7 mm) Adapter hex's front to the barrel's front face, along the head axis · Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24), p.1, GB745 front and side views
- Ø1.50 (38.1 mm) Across the adapter hex's corners (side view) · Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24), p.1, GB745 front and side views
- 13.16 (333.8 mm) Overall height, floor to the adapter hex's top corner · Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24), p.1, GB745 front and side views
- 4.84 (121.9 mm) Floor to the top of the base's side · Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24), p.1, GB745 front and side views
- 6.17 (156.7 mm) Base cover's front to the air valve housing's back · Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24), p.1, GB745 front and side views
- 2.05 (51.9 mm) Grip depth (side view) · Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24), p.1, GB745 front and side views
- 1.40 (35.6 mm) Grip width (front view) · Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24), p.1, GB745 front and side views
- 1.84 (46.7 mm) Head flange and handle top width (front view) · Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24), p.1, GB745 front and side views
- Ø4.88 (124 mm) Base cover diameter · Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24), p.1, GB745 front and side views
- Ø2.31 (58.7 mm) Head cylinder barrel diameter (back part) · Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24), p.1, GB745 front and side views
- Ø2.06 (52.3 mm) Head cylinder barrel's front part · Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24), p.1, GB745 front and side views
Scaled from the catalog figure, not dimensioned
- Adapter hex: across flats: 1.37 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, GB745 side view, not dimensioned)
- Adapter thread: crest spacing (as drawn; not a thread specification): 0.06 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, GB745 side view, not dimensioned)
- Adapter jam nut: across flats: 0.98 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, GB745 side view, not dimensioned)
- Head cylinder: largest diameter: 2.31 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, GB745 side view, not dimensioned)
- End cap: across flats: 1.84 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, GB745 side view, not dimensioned)
- Deflector collar: largest diameter: 1.07 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, GB745 side view, not dimensioned)
- Pintail deflector: largest diameter: 1.07 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, GB745 side view, not dimensioned)
- Deflector outlet: side outline (length): 0.96 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, GB745 side view, not dimensioned)
- Deflector outlet: width: 1.07 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, GB745 side view, not dimensioned)
- Head cylinder web: side outline (length): 2.05 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, GB745 side view, not dimensioned)
- Head cylinder web: width: 1.81 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, GB745 front view, not dimensioned)
- Head cap screw: diameter: 0.33 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, GB745 side view, not dimensioned)
- Head cylinder flange: side outline (length): 2.51 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, GB745 side view, not dimensioned)
- Handle top: side outline (length): 2.86 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, GB745 side view, not dimensioned)
- Grip and shoulder: side outline (length): 4.97 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, GB745 side view, not dimensioned)
- Grip and shoulder: end view outline (widest): 4.64 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, GB745 front view, not dimensioned)
- Grip and shoulder: top view outline (widest): 4.63 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, top view, not dimensioned)
- Base: largest diameter: 4.63 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, GB745 side view, not dimensioned)
- Air valve housing: side outline (length): 1.75 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, GB745 side view, not dimensioned)
- Air valve housing: width: 4.51 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, GB745 front view, not dimensioned)
- Air inlet swivel: side outline (length): 1.20 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, GB745 side view, not dimensioned)
- Air inlet swivel: width: 0.76 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, GB745 side view, not dimensioned)
- Base cover: largest diameter: 4.88 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, GB745 side view, not dimensioned)
- Bottom pad: largest diameter: 4.59 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, GB745 side view, not dimensioned)
- Actuator lever: side outline (length): 0.67 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, GB745 side view, not dimensioned)
- Actuator lever: width: 0.50 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, GB745 front view, not dimensioned)
- Actuator assembly-air: across flats: 0.59 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, GB745 side view, not dimensioned)
- Stop plate: side outline (length): 0.67 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, GB745 side view, not dimensioned)
- Stop plate: width: 1.07 in (scaled from Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24) p.1, GB745 front view, not dimensioned)
- Built from the Gage Bilt GB745 flyer's front and side views (page 1). Part names follow the GB745 manual: head cylinder (745366), end cap (745616), pintail deflector, handle assembly (744129), base cover (744124), actuator lever assembly (704343), actuator assembly-air (704130), swivel (A-249, the air inlet); no parts list names the hex, thread and jam nut at the head's front, so they are named as drawn (an adapter).
- Front of the tool to the left (-x): x = 0 at the base cover's front, y = 0 on the floor. The head tilts 10 deg, front end up; its lengths (8.48, 5.74, 2.78) run along its axis.
- The air inlet swivel shows in the side view only (behind the housing); it is placed on the tool's centre plane, the front view hiding it behind the base.
Not modelled
Other brands' equivalents2 statements
- Gage Bilt says GB745 replaces 245 (Huck) Gage Bilt 2017 p.106 ↗
Gage Bilt's cross-reference lists GB745 (installation tool) for 245.
- Gage Bilt says GB745 replaces 255 (Huck) Gage Bilt 2017 p.106 ↗
Gage Bilt's cross-reference lists GB745 (installation tool) for 255.
Sources1
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Published dimensions13 · for envelope CAD
| Feature | Value | As printed | Source |
|---|---|---|---|
| Tool length | 8.48 in | 8.48 (215.4 mm) Head length along its axis: the adapter hex's front to the pintail deflector's tip (side view). | Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24), p.1, GB745 front and side views ↗ |
| As drawn (feature not labeled) | 5.74 in | 5.74 (145.8 mm) Along the head axis: the adapter hex's front to the back of the deflector's collar behind the end cap (side view). | Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24), p.1, GB745 front and side views ↗ |
| As drawn (feature not labeled) | 2.78 in | 2.78 (70.7 mm) Along the head axis: the adapter hex's front to the head cylinder barrel's front face (side view). | Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24), p.1, GB745 front and side views ↗ |
| As drawn (feature not labeled) | 1.5 in | Ø1.50 (38.1 mm) Across the adapter hex at the head's front, drawn across its corners (side view). | Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24), p.1, GB745 front and side views ↗ |
| Tool height | 13.16 in | 13.16 (333.8 mm) Floor to the adapter hex's top corner (the head tilts front end up). As printed; 13.16 in. is 334.3 mm, the drawing's mm value differs. | Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24), p.1, GB745 front and side views ↗ |
| As drawn (feature not labeled) | 4.84 in | 4.84 (121.9 mm) Floor to the top of the base's side, where the sloping shoulder begins (side view). As printed; 4.84 in. is 122.9 mm, the drawing's mm value differs. | Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24), p.1, GB745 front and side views ↗ |
| As drawn (feature not labeled) | 6.17 in | 6.17 (156.7 mm) Base depth: the base cover's front to the air valve housing's back (side view). | Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24), p.1, GB745 front and side views ↗ |
| As drawn (feature not labeled) | 2.05 in | 2.05 (51.9 mm) Grip depth (side view). As printed; 2.05 in. is 52.1 mm, the drawing's mm value differs. | Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24), p.1, GB745 front and side views ↗ |
| As drawn (feature not labeled) | 1.4 in | 1.40 (35.6 mm) Grip width (front view). | Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24), p.1, GB745 front and side views ↗ |
| As drawn (feature not labeled) | 1.84 in | 1.84 (46.7 mm) Width of the head flange and the handle top (front view). | Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24), p.1, GB745 front and side views ↗ |
| Base diameter | 4.88 in | Ø4.88 (124 mm) Base cover diameter (front view). | Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24), p.1, GB745 front and side views ↗ |
| Body diameter | 2.31 in | Ø2.31 (58.7 mm) Head cylinder barrel diameter, its back part (front view). | Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24), p.1, GB745 front and side views ↗ |
| As drawn (feature not labeled) | 2.06 in | Ø2.06 (52.3 mm) Head cylinder barrel's front part (front view). | Gage Bilt GB745 flyer (no revision printed; PDF created 2026-09-24), p.1, GB745 front and side views ↗ |
Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.