← Tooling compatibility finder

99-1720DG

99-1720DG nose assembly · Nose / pulling head · Huck · Offset

99-1720DG installs NAS shear pull-type lockbolt -10 on a Model 245 or 255 with adapter 122134.

Catalog noteDetails
Figure 4; 4 flats (Nose Assembly Specifications).
Loading 3D view...
Traced reference model. Not for machining or verified fit.

Traced from 1 manufacturer view, with published dimensions held fixed. Other shapes and unseen depths are inferred.

Built from 5 printed dimensions, 9 scaled from the figure.Details

Reference reconstruction traced from manufacturer views and constrained by printed dimensions. Undimensioned shapes and depths are inferred and labelled; omitted features mean this is not a guaranteed clearance boundary. NOT a manufacturing model or manufacturer CAD. Jaws and internal parts are not modelled. Verify fit and clearance against current manufacturer data and the physical tool.

Scaled from the catalog figure, not dimensioned

  • Mounting flange diameter: 1.14 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 4, not dimensioned)
  • Shank height (top at the D line) and end-view width: 0.89 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 4, not dimensioned)
  • Head and arm outline (side view): 1.98 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 4, not dimensioned)
  • Dashed (phantom) outline behind the head: 0.48 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 4, not dimensioned)
  • Shank slot (side view outline; cut through the width): 1.35 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 4, not dimensioned)
  • Pin in the slot: diameter (taken across the shank's width): 0.25 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 4, not dimensioned)
  • Head block section (end view): top flat width: 0.71 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 4 end view, not dimensioned)
  • Anvil: outside / bore diameter (end view circles): 0.53 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 4 end view, not dimensioned)
  • Raised lip on the head's top: 0.03 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 4, not dimensioned)
  • The table prints 4 flats for this nose; the figure does not draw them, so they are not cut (the larger shape).
  • Figure 4 draws D from the jaw centre line down to the top of the shank (its lower extension line is the shank's top edge), not to the tool centre line, which it does not draw: the model follows the drawing, so the jaw (fastener) axis is 1.567 in above the tool axis here (D plus the shank's scaled half height), parallel to it through the head. Confirm the offset with Huck before relying on it.
  • The dashed outline behind the head (the A max-stroke dimension's extent) is modelled as its own translucent part, STROKE SPACE: keep it clear.

Not modelled

  • The pocket in the arm (the end view's U outline; not cut), the shank's fillets at the flange and its chamfered front bottom corner, jaws, collet and drawbar. The clearance envelope keeps the slot filled and the head square (the larger shape); the reference model cuts the slot and shapes the head as the end view draws it.
Everything it installs1 fastener group

NAS shear pull-type lockbolt (pin and collar) -10, per the Huck catalog

Other brands' equivalents0 statements

No cross-brand statement on file for these tools. Not documented is not the same as incompatible.

Sources1
  1. Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.46, Model 245/255, Standard Inline & Offset Nose Assemblies ↗
    • Model 245/255, Standard Inline & Offset Nose Assemblies. "Requires Adapter Part Number 122134. No Stroke Limiter Needed".

Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.

Published dimensions5 · for envelope CAD
FeatureValueAs printedSource
Max stroke (as drawn)(A, Figure 4 (p.51))1.95 in1.95

5/16" table

Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.51, Nose Assembly Specifications, 5/16" table ↗
Head width(B, Figure 4 (p.51))1.2 in1.20

5/16" table

Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.51, Nose Assembly Specifications, 5/16" table ↗
Centerline to edge(C, Figure 4 (p.51))0.5 in.50

Figure 4 draws C from the jaw centreline to the top edge of the head. It covers that one edge only; the head is B wide. 5/16" table

Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.51, Nose Assembly Specifications, 5/16" table ↗
Offset head height(D, Figure 4 (p.51))1.13 in1.13

5/16" table

Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.51, Nose Assembly Specifications, 5/16" table ↗
Length from tool face(E, Figure 4 (p.51))3.33 in3.33

5/16" table

Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.51, Nose Assembly Specifications, 5/16" table ↗

Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.

On the floor:Low clearance puller finderOffset Huck nose assemblies: dimensions

Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers

Next step

Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

Find tooling for a part number →Tooling shop →