← Tooling compatibility finder

G746A

G746A CherryMAX® Riveter · Installation tool · Cherry

G746A installs CherryMAX® blind rivet -4, -5, -6 with nose H701B-456, H747-456, H753A-456, H781A-456 or H782.

3D model not available: dimensions not published. 3D library

Everything it installs1 fastener group

CherryMAX® blind rivet (NAS9301 to NAS9312 / CR3213 to CR3555P) -4, -5, -6, per the Cherry catalog

Fastener process documents that name it2
Other brands' equivalents0 statements

No cross-brand statement on file for these tools. Not documented is not the same as incompatible.

Sources4
  1. Cherry CA-1001 Tool Catalog (2017), p.6, Pulling Heads table ↗
    • Nominal diameters. Section 1 riveter with a Section 1 pulling head (CA-1001 p.1, p.6); CA-1015 p.5 shades nominal -4, -5, -6. The ©2015 CherryMAX guide (p.26) does not list the G746A.
  2. Cherry CA-1015 (CherryMAX process manual), p.5, CherryMAX® Tool Selection (shaded chart) ↗
    • Oversize diameters: CA-1015 p.5 shades the G746A for oversize -4 and -5 only (not -6).
  3. Cherry CA-1015 (CherryMAX process manual), p.19, CherryMAX Tooling ↗
  4. Cherry CA-1037 (Cherry SST), p.11, Installation Tooling, Tool Selection Chart ↗

Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.

Published dimensions9 · for envelope CAD
FeatureValueAs printedSource
Air pressure90-110 psi90 psi (6,2 bar) min./110 psi (7,6 bar) max.Cherry CA-1001 Tool Catalog (2017), p.5, G746A Specifications ↗
Stroke0.875 in0.875 inch (22,23 mm)Cherry CA-1001 Tool Catalog (2017), p.5, G746A Specifications ↗
Pull force1850 lbf1850 lbs (8,23 kN) @ 90 psi (6,2 bar)Cherry CA-1001 Tool Catalog (2017), p.5, G746A Specifications ↗
Weight4.25 lb4-1/4 lbs (1,93 kg)Cherry CA-1001 Tool Catalog (2017), p.5, G746A Specifications ↗
Air consumption0.25 scf/cycle0.25 SCF/cycle (7,08 L/cycle)Cherry CA-1001 Tool Catalog (2017), p.5, G746A Specifications ↗

As printed in the fastener process documents

Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.

Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers

Next step

Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

Find tooling for a part number →Tooling shop →