← Tooling compatibility finder
H513S-08-24
H513S-08-24 Straight Lockbolt Pulling Head (swivel), -8 · Nose / pulling head · Cherry · Standard
H513S-08-24 installs Pull type lockbolt -8 on a G87D or G85D-S.
Catalog noteDetails
Everything it installs1 fastener group
Pull type lockbolt (NAS1446-1452 to NAS6946-6952) -8, per the Cherry catalog
Other brands' equivalents1 statement
- Cherry says H513S-08-24 fits Huck 353 (direct) (Huck) Cherry CA-1001 p.10 ↗
"Parts with no asterisk fit directly on Cherry G87D, G85D and Huck®353 tools."
Sources2
- Cherry Fastening Systems for Aerospace Tool Catalog (©2015 edition, archived), p.32, Pull Type Lockbolts & Tools, Cherry Power Tools ↗
- "* Refer to H513 pulling head chart for alternate part numbers."
- Cherry CA-1001 Tool Catalog (2017), p.10, G87D Pulling Head Selection Chart, notes ↗
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Published dimensions1 · for envelope CAD
| Feature | Value | As printed | Source |
|---|---|---|---|
| Length from tool face | 2.375 in | 2.375" (Length from Tool Face column) "Straight Lockbolt pulling head part numbers indicate pulling head length and diameter ... -35 indicates that the pulling head extends 3.5" beyond gun line." | Cherry CA-1001 Tool Catalog (2017), p.10, G87D Pulling Head Selection Chart ↗ |
Only dimensions a document prints are listed, with the feature each one measures. None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.
Next · 3 Quote
Put the tool on the quote
Add to quote puts this PN on the one quote with its citation. Tooling needs no lot traceability.