Low profile CherryMAX puller
Every pulling head on file for Cherry-made CherryMAX rivets, with the dimension its catalog prints.
| Nose or head | Dia. | Head height, in. | Catalog |
|---|---|---|---|
| H753A-456 | -4, -5, -6 | 2.25 | Cherry CA-1001 Tool Catalog p.6 |
| 456MAX-704-54RA | -4, -5, -6 | 3.48 | Gage Bilt catalog 2017 p.43 |
| H828-8 | -8 | dimension not published | Cherry tool catalog 2015 p.26 |
| H829-8 | -8 | dimension not published | Cherry CA-1001 Tool Catalog p.8 |
Head height is printed for right angle heads only. Straight and offset noses are listed below with their nose length. The nose mounts in line with the riveter. No document on file prints the riveter's length behind it.
Compare these with your own clearance (opens with CR3213) →
The aircraft's structural repair manual and the manufacturer's installation instructions govern. The tool manufacturer's data sheet governs the tool's dimensions.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Cherry tooling, for Cherry-made parts
10Right angle
- Head height, nose tip to back of head
- 2.25 in (printed 2-1/4") Cherry CA-1001 Tool Catalog p.6
- Fastener centreline to one edge of the nose
- dimension not published
On G704B, G704B-SR, G704B-40SH, G747, G800, G746A. On G83A, G84 with adapter 744-300. On G784 with adapter 680B205. Cherry tool catalog 2015 p.26
Request this tool: buy, rent or repair →- Head height, nose tip to back of head
- dimension not published
- Fastener centreline to one edge of the nose
- dimension not published
On G84 with adapter 744-200. Cherry tool catalog 2015 p.26
Request this tool: buy, rent or repair →- Head height, nose tip to back of head
- dimension not published
- Fastener centreline to one edge of the nose
- dimension not published
On G84. Cherry CA-1001 Tool Catalog p.8
Request this tool: buy, rent or repair →
OffsetThe nose mounts in line with the riveter. No document on file prints the riveter's length behind it.
- Nose length, in line with the riveter
- 3.3906 in (printed 3-25/64") Cherry CA-1001 Tool Catalog p.6
- Fastener centreline to one edge of the nose
- dimension not published
On G704B, G704B-SR, G704B-40SH, G747, G800, G746A. On G83A, G84 with adapter 744-300. On G784 with adapter 680B205. Cherry tool catalog 2015 p.26
Request this tool: buy, rent or repair →- Nose length, in line with the riveter
- 4.5938 in (printed 4-19/32") Cherry CA-1001 Tool Catalog p.6
- Fastener centreline to one edge of the nose
- dimension not published
On G704B, G704B-SR, G704B-40SH, G747, G800, G746A. On G83A, G84 with adapter 744-300. On G784 with adapter 680B205. Cherry tool catalog 2015 p.26
Request this tool: buy, rent or repair →- Nose length, in line with the riveter
- dimension not published
- Fastener centreline to one edge of the nose
- dimension not published
On G84 with adapter 744-200. Cherry tool catalog 2015 p.26
Request this tool: buy, rent or repair →
StandardThe nose mounts in line with the riveter. No document on file prints the riveter's length behind it.
- Nose length, in line with the riveter
- 2.25 in (printed 2-1/4) Cherry TS-H701B-456 instruction sheet p.1
- Fastener centreline to one edge of the nose
- 0.21 in (printed .21) Cherry TS-H701B-456 instruction sheet p.1End view: centreline to the flat on the nose. The side view draws the flat at the tip only and prints no length for it; behind it the nose is 3/4 in. diameter.
On G704B, G704B-SR, G704B-40SH, G747, G800, G746A. On G83A, G84 with adapter 744-300. Cherry tool catalog 2015 p.26
Request this tool: buy, rent or repair →- Nose length, in line with the riveter
- 2.3438 in (printed 2-11/32") Cherry CA-1001 Tool Catalog p.6
- Fastener centreline to one edge of the nose
- 0.28 in (printed .28 EDGE DISTANCE AT FLATS) Cherry TS-H747-456 instruction sheet p.1End view: centreline to the hex sleeve's flats. Across the corners the sleeve is wider.
On G704B, G704B-SR, G704B-40SH, G747, G800, G746A. On G83A, G84 with adapter 744-300. Cherry tool catalog 2015 p.26
Request this tool: buy, rent or repair →- Nose length, in line with the riveter
- 2.83 in (printed 2.83") Cherry CA-1001 Tool Catalog p.8
- Fastener centreline to one edge of the nose
- dimension not published
On G84. Cherry CA-1015 p.5
Request this tool: buy, rent or repair →- Nose length, in line with the riveter
- dimension not published
- Fastener centreline to one edge of the nose
- dimension not published
On G784. Cherry tool catalog 2015 p.26
Request this tool: buy, rent or repair →
Gage Bilt tooling. Gage Bilt's chart names Cherry, Allfast, Huck rivets
5Right angle
- Head height, nose tip to back of head
- 3.48 in (printed 3.48 (88.4 mm)) Gage Bilt catalog 2017 p.43
- Fastener centreline to one edge of the nose
- dimension not published
On GB704. Gage Bilt catalog 2017 p.43
Request this tool: buy, rent or repair →
OffsetThe nose mounts in line with the riveter. No document on file prints the riveter's length behind it.
- Nose length, in line with the riveter
- 4.312 in (printed 4.312) Gage Bilt catalog 2017 p.43
- Fastener centreline to one edge of the nose
- dimension not published
On GB704. Gage Bilt catalog 2017 p.43
Request this tool: buy, rent or repair →
StandardThe nose mounts in line with the riveter. No document on file prints the riveter's length behind it.
- Nose length, in line with the riveter
- 2.25 in (printed 2.25) Gage Bilt catalog 2017 p.43
- Fastener centreline to one edge of the nose
- dimension not published
On GB704. Gage Bilt catalog 2017 p.43
Request this tool: buy, rent or repair →- Nose length, in line with the riveter
- 3.5 in (not a printed number: read from the part number by the chart's note) Gage Bilt catalog 2017 p.41"The last 2 digits of the nose assembly represents the length the nose extends from the tool i.e. -20 = 2.0 inches" (note on this chart, PDF p.41). The same catalog draws 456MAX-701-17 at 1.75 in., so the rule is approximate.
- Fastener centreline to one edge of the nose
- dimension not published
On GB704. Gage Bilt catalog 2017 p.41
Request this tool: buy, rent or repair →- Nose length, in line with the riveter
- 3.5 in (not a printed number: read from the part number by the chart's note) Gage Bilt catalog 2017 p.41"The last 2 digits of the nose assembly represents the length the nose extends from the tool i.e. -20 = 2.0 inches" (note on this chart, PDF p.41). The same catalog draws 456MAX-701-17 at 1.75 in., so the rule is approximate.
- Fastener centreline to one edge of the nose
- dimension not published
On GB704. Gage Bilt catalog 2017 p.41
Request this tool: buy, rent or repair →
Right angle CherryMAX pullerCherryMAX tooling, gauges and removalCherryMAX stem breaks high or low
Next
Sources
- Cherry Fastening Systems for Aerospace Tool Catalog (©2015 edition, archived)
- Cherry CA-1001 Tool Catalog (2017)
- Cherry TS-H701B-456 instruction sheet (Rev E, 26 Jun 23)
- Cherry TS-H747-456 instruction sheet (Rev D, 26 Mar 15)
- Cherry CA-1015 (CherryMAX process manual)
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages)