← Tooling compatibility finder
H84A-8
H84A-8 Straight Pulling Head · Nose / pulling head · Cherry · Standard
H84A-8 installs CherryMAX® blind rivet -8 on a G84.
Traced from 1 manufacturer view, with published dimensions held fixed. Other shapes and unseen depths are inferred.
Built from 3 printed dimensions, 7 scaled from the figure.Details
Reference reconstruction traced from manufacturer views and constrained by printed dimensions. Undimensioned shapes and depths are inferred and labelled; omitted features mean this is not a guaranteed clearance boundary. NOT a manufacturing model or manufacturer CAD. Jaws and internal parts are not modelled. Verify fit and clearance against current manufacturer data and the physical tool.
- 2.83" Sleeve, end to end · Cherry CA-1001 Tool Catalog (2017), p.8, H84A-8 drawing
- 1.99" Bayonet lugs' front to the sleeve's end · Cherry CA-1001 Tool Catalog (2017), p.8, H84A-8 drawing
- .75" Sleeve diameter · Cherry CA-1001 Tool Catalog (2017), p.8, H84A-8 drawing
Scaled from the catalog figure, not dimensioned
- Sleeve: outline: 0.75 in (scaled from Cherry TS-H84A-8 technical data sheet (Rev C, 30 Nov 09) p.1, Fig. 1 Dimensional Data (Rev C), not dimensioned)
- Bayonet lugs: diameter: 0.87 in (scaled from Cherry TS-H84A-8 technical data sheet (Rev C, 30 Nov 09) p.1, Fig. 1 Dimensional Data (Rev C), not dimensioned)
- Nosepiece: hex across flats: 0.43 in (scaled from Cherry TS-H84A-8 technical data sheet (Rev C, 30 Nov 09) p.1, Fig. 1 Dimensional Data (Rev C), not dimensioned)
- Sleeve: outline (largest diameter): 0.75 in (scaled from Cherry TS-H84A-8 technical data sheet (Rev C, 30 Nov 09) p.1, Fig. 1 Dimensional Data (Rev C), not dimensioned)
- Bayonet lug top: diameter: 0.11 in (scaled from Cherry TS-H84A-8 technical data sheet (Rev C, 30 Nov 09) p.1, Fig. 1 Dimensional Data (Rev C), not dimensioned)
- Bayonet lug bottom: diameter: 0.11 in (scaled from Cherry TS-H84A-8 technical data sheet (Rev C, 30 Nov 09) p.1, Fig. 1 Dimensional Data (Rev C), not dimensioned)
- Nose piece: across flats: 0.43 in (scaled from Cherry TS-H84A-8 technical data sheet (Rev C, 30 Nov 09) p.1, Fig. 1 Dimensional Data (Rev C), not dimensioned)
Not modelled
Everything it installs1 fastener group
CherryMAX® blind rivet (NAS9301 to NAS9312 / CR3213 to CR3555P) -8, per the Cherry catalog
Fastener process documents that name it1
Other brands' equivalents0 statements
No cross-brand statement on file for these tools. Not documented is not the same as incompatible.
Sources2
- Cherry CA-1015 (CherryMAX process manual), p.5, CherryMAX® Tool Selection (shaded chart) ↗
- CA-1015 p.5 shades G84 + H84A-8, adaptor none, nominal and oversize -8. The ©2015 guide p.26 prints "G83A/84"; the G83A is not shaded for -8 in CA-1015 and is left off.
- Cherry CA-1015 (CherryMAX process manual), p.21, CherryMAX Tooling (-8 Diameter) ↗
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Published dimensions3 · for envelope CAD
| Feature | Value | As printed | Source |
|---|---|---|---|
| Overall length | 2.83 in | 2.83" | Cherry CA-1001 Tool Catalog (2017), p.8, H84A-8 drawing ↗ |
| As drawn (feature not labeled) | 1.99 in | 1.99" | Cherry CA-1001 Tool Catalog (2017), p.8, H84A-8 drawing ↗ |
| Nose diameter | 0.75 in | .75" | Cherry CA-1001 Tool Catalog (2017), p.8, H84A-8 drawing ↗ |
Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.
On the floor:Low clearance puller finderLow profile CherryMAX puller: printed head heights
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.