← Tooling compatibility finder
G84
G84 Medium Duty Lockbolt Riveter · Installation tool · Cherry
G84 installs CherryMAX® blind rivet -4, -5, -6, -8 with nose H829-8.
Catalog noteDetails
Traced from 0 manufacturer views, with published dimensions held fixed. Other shapes and unseen depths are inferred.
Built from 5 printed dimensions, 23 scaled from the figure.Details
Reference reconstruction traced from manufacturer views and constrained by printed dimensions. Undimensioned shapes and depths are inferred and labelled; omitted features mean this is not a guaranteed clearance boundary. NOT a manufacturing model or manufacturer CAD. Jaws and internal parts are not modelled. Verify fit and clearance against current manufacturer data and the physical tool.
- 5-11/16" (144.5 mm) Locking sleeve front to the head's back face · Cherry TM-G84 tool manual (Rev H, 2015), p.3, p.3 dimensioned photo
- 2-3/4" (69.9 mm) Head's back face to the pin deflector's back end · Cherry TM-G84 tool manual (Rev H, 2015), p.3, p.3 dimensioned photo
- 1-1/8" (28.6 mm) Head axis to the top of the head · Cherry TM-G84 tool manual (Rev H, 2015), p.3, p.3 dimensioned photo
- 2-1/8" (54 mm) Handle depth at its narrowest · Cherry TM-G84 tool manual (Rev H, 2015), p.3, p.3 dimensioned photo
- 13-1/4" (336.6 mm) Tool height (head top to base cover bottom) · Cherry TM-G84 tool manual (Rev H, 2015), p.3, p.3 dimensioned photo
Scaled from the catalog figure, not dimensioned
- Sleeve, locking: largest diameter: 1.24 in (scaled from Cherry TM-G84 tool manual (Rev H, 2015) p.3, p.3 dimensioned photo, side view, not dimensioned)
- Extension, head: largest diameter: 1.05 in (scaled from Cherry TM-G84 tool manual (Rev H, 2015) p.3, p.3 dimensioned photo, side view, not dimensioned)
- Cylinder, head: largest diameter: 2.25 in (scaled from Cherry TM-G84 tool manual (Rev H, 2015) p.3, p.3 dimensioned photo, side view, not dimensioned)
- Relief valve: largest diameter: 0.46 in (scaled from Cherry TM-G84 tool manual (Rev H, 2015) p.3, p.3 dimensioned photo, side view, not dimensioned)
- Cap, end: largest diameter: 0.96 in (scaled from Cherry TM-G84 tool manual (Rev H, 2015) p.3, p.3 dimensioned photo, side view, not dimensioned)
- Fitting, deflector: largest diameter: 0.96 in (scaled from Cherry TM-G84 tool manual (Rev H, 2015) p.3, p.3 dimensioned photo, side view, not dimensioned)
- Deflector, pin: side outline (length): 2.57 in (scaled from Cherry TM-G84 tool manual (Rev H, 2015) p.3, p.3 dimensioned photo, side view, not dimensioned)
- Deflector, pin: width: 1.00 in (scaled from Cherry TM-G84 tool manual (Rev H, 2015) p.3, p.3 dimensioned photo, side view, not dimensioned)
- Cylinder, return: side outline (length): 3.96 in (scaled from Cherry TM-G84 tool manual (Rev H, 2015) p.3, p.3 dimensioned photo, side view, not dimensioned)
- Cylinder, return: width: 2.25 in (scaled from Cherry TM-G84 tool manual (Rev H, 2015) p.3, p.3 dimensioned photo, side view, not dimensioned)
- Screw, button hd cap: diameter: 0.44 in (scaled from Cherry TM-G84 tool manual (Rev H, 2015) p.3, p.3 dimensioned photo, side view, not dimensioned)
- Screw, button hd cap: diameter: 0.44 in (scaled from Cherry TM-G84 tool manual (Rev H, 2015) p.3, p.3 dimensioned photo, side view, not dimensioned)
- Handle top flange: side outline (length): 2.60 in (scaled from Cherry TM-G84 tool manual (Rev H, 2015) p.3, p.3 dimensioned photo, side view, not dimensioned)
- Handle top flange: width: 2.54 in (scaled from Cherry TM-G84 tool manual (Rev H, 2015) p.3, p.3 dimensioned photo, side view, not dimensioned)
- Handle: side outline (length): 4.48 in (scaled from Cherry TM-G84 tool manual (Rev H, 2015) p.3, p.3 dimensioned photo, side view, not dimensioned)
- Handle: width: 2.13 in (scaled from Cherry TM-G84 tool manual (Rev H, 2015) p.3, p.3 dimensioned photo, side view, not dimensioned)
- Sub-assembly, trigger: largest diameter: 0.60 in (scaled from Cherry TM-G84 tool manual (Rev H, 2015) p.3, p.3 dimensioned photo, side view, not dimensioned)
- Base, handle: largest diameter: 5.15 in (scaled from Cherry TM-G84 tool manual (Rev H, 2015) p.3, p.3 dimensioned photo, side view, not dimensioned)
- Cover, base: largest diameter: 5.51 in (scaled from Cherry TM-G84 tool manual (Rev H, 2015) p.3, p.3 dimensioned photo, side view, not dimensioned)
- Valve housing: side outline (length): 1.54 in (scaled from Cherry TM-G84 tool manual (Rev H, 2015) p.3, p.3 dimensioned photo, side view, not dimensioned)
- Valve housing: width: 1.00 in (scaled from Cherry TM-G84 tool manual (Rev H, 2015) p.3, p.3 dimensioned photo, side view, not dimensioned)
- Swivel: largest diameter: 0.71 in (scaled from Cherry TM-G84 tool manual (Rev H, 2015) p.3, p.3 dimensioned photo, side view, not dimensioned)
- Pressure regulator: largest diameter: 0.82 in (scaled from Cherry TM-G84 tool manual (Rev H, 2015) p.3, p.3 dimensioned photo, side view, not dimensioned)
- Traced from the TM-G84 (Rev H) manual's dimensioned product photo (side view). The catalog's values (CA-1001 p.7) stay on the tool page; the manual's photo values are added as their own dimensions.
- The photo's 6-1/4 across the base does not match the scale of the head and handle values (the base stands nearer the camera); the model keeps the photo's base and lists it as not used.
- The head parts are round about the head's axis, the base round about its vertical axis; the flat parts take widths by the rules listed with each value.
- The p.3 dimensioned photo, side view is read for sizes but not silhouette-checked: it is a product photo taken from a little above and in front (the base cover's rim shows as an ellipse rising toward the back, and its edges are soft); against the photo's silhouette the model scores IoU 0.976, p95 4.0 px, max 17 px (the base cover's back corner), docs/cad-verify/tool-overlays/figs-cherry-riveters.json keeps the view's settings.
- The source draws no front or end view: widths across are scaled by the rules listed with the values.
Not modelled
Everything it installs2 fastener groups
CherryMAX® blind rivet (NAS9301 to NAS9312 / CR3213 to CR3555P) -4, -5, -6, -8, per the Cherry catalog
Pull type lockbolt (NAS1446-1452 to NAS6946-6952) -4, -5, -6, -8, per the Cherry catalog
Fastener process documents that name it3
- CherryMAX -4, -5, -6, -8 Cherry CA-1015 p.21 ↗
- Cherry Maxibolt -8 Cherry CA-1039 p.23 ↗
- Cherry 1900 bulbing blind rivet -4, -5, -6 Cherry CA-1035 p.2 ↗
Other brands' equivalents2 statements
- Cherry says G84 fits Huck 230, 362 (bayonet mount) (Huck) Cherry CA-1001 p.7 ↗
G84 bayonet mounting system, "common for G83A and G84 (compatible to Huck 230, 362 models)."
- Gage Bilt says GB731 replaces G84 (Cherry) Gage Bilt 2017 p.154 ↗
Gage Bilt's cross-reference lists GB731 (installation tool) for G84.
Sources10
- Cherry CA-1001 Tool Catalog (2017), p.22, Riveter Adapters ↗
- 744-300: G83A, G84 to the G704B (CherryMAX®) mounting system "for H701B, H747, H781A, H782, H753A"; "Must remove the bayonet adapter".
- Cherry CA-1015 (CherryMAX process manual), p.5, CherryMAX® Tool Selection (shaded chart) ↗
- CA-1015 p.5 shades G84 + H84A-8, adaptor none, nominal and oversize -8. The ©2015 guide p.26 prints "G83A/84"; the G83A is not shaded for -8 in CA-1015 and is left off.
- Cherry Fastening Systems for Aerospace Tool Catalog (©2015 edition, archived), p.26, CherryMAX® Blind Rivets & Tools, Cherry Power Tools ↗
- "* Use adapter 744-200". p.26 prints "G83A/84"; G84 only here (CA-1015 p.5 shades -8 for the G84 only).
- Cherry CA-1001 Tool Catalog (2017), p.8, Pulling Heads for G83A/G84 tools ↗
- CA-1001 p.8: CherryMAX® Right Angle H829-8, adaptor none, -5, -6, -8 ("Pulling Heads for G83A/G84 tools"); G84 only for -8 per CA-1015 p.5. Replaces the ©2015 guide's H829-56MBPS, which the 2017 catalog lists for MAXIBOLT PLUS® -5, -6.
- Cherry Fastening Systems for Aerospace Tool Catalog (©2015 edition, archived), p.32, Pull Type Lockbolts & Tools, Cherry Power Tools ↗
- "* Refer to H513 pulling head chart for alternate part numbers."
- Cherry CA-1015 (CherryMAX process manual), p.21, CherryMAX Tooling (-8 Diameter) ↗
- "Primarily Lockbolt riveters, but they are also used for installing the -8 diameter CherryMAX rivets" (CA-1015 p.21).
- Cherry CA-1039 (MAXIBOLT process manual), p.23, Installation Tool Selection Chart ↗
- Cherry CA-1035 (Cherry 1900), p.2, Tooling ↗
- Cherry CA-1001 Tool Catalog (2017), p.7, G84 Description ↗
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.154, Other - Gage Bilt Cross Reference, page 49 ↗
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Published dimensions25 · for envelope CAD
| Feature | Value | As printed | Source |
|---|---|---|---|
| Air pressure | 90-110 psi | 90 psi (6,2 bar) min./110 psi (7,6 bar) max. | Cherry CA-1001 Tool Catalog (2017), p.7, G84 Specifications ↗ |
| Stroke | 0.562 in | 0.562 inch (14,3 mm) | Cherry CA-1001 Tool Catalog (2017), p.7, G84 Specifications ↗ |
| Pull force | 5750 lbf | 5,750 lbs. (25,6 kN) @ 90 psi (6,2 bar) | Cherry CA-1001 Tool Catalog (2017), p.7, G84 Specifications ↗ |
| Return force | 1200 lbf | 1200 lbs. (5,34 kN) on return stroke | Cherry CA-1001 Tool Catalog (2017), p.7, G84 Specifications ↗ |
| Weight | 7.7 lb | 7.70 lbs. (3,5 kg) | Cherry CA-1001 Tool Catalog (2017), p.7, G84 Specifications ↗ |
| Tool length | 13.25 in | 13-1/4" (336.6mm) | Cherry CA-1001 Tool Catalog (2017), p.7, G84 drawing ↗ |
| Base diameter | 6.25 in | 6-1/4" (158.8mm) | Cherry CA-1001 Tool Catalog (2017), p.7, G84 drawing ↗ |
| As drawn (feature not labeled) | 5.6875 in | 5-11/16" (144.5mm) | Cherry CA-1001 Tool Catalog (2017), p.7, G84 drawing ↗ |
| As drawn (feature not labeled) | 2.75 in | 2-3/4" (69.9mm) | Cherry CA-1001 Tool Catalog (2017), p.7, G84 drawing ↗ |
| As drawn (feature not labeled) | 1.125 in | 1-1/8" (28.6mm) | Cherry CA-1001 Tool Catalog (2017), p.7, G84 drawing ↗ |
| As drawn (feature not labeled) | 5.6875 in | 5-11/16" (144.5 mm) Photo: the locking sleeve's front to the head cylinder's back face. | Cherry TM-G84 tool manual (Rev H, 2015), p.3, p.3 dimensioned photo ↗ |
| As drawn (feature not labeled) | 2.75 in | 2-3/4" (69.9 mm) Photo: the head cylinder's back face to the pin deflector's back end. | Cherry TM-G84 tool manual (Rev H, 2015), p.3, p.3 dimensioned photo ↗ |
| As drawn (feature not labeled) | 1.125 in | 1-1/8" (28.6 mm) Photo: the head's axis to the top of the head. | Cherry TM-G84 tool manual (Rev H, 2015), p.3, p.3 dimensioned photo ↗ |
| As drawn (feature not labeled) | 2.125 in | 2-1/8" (54 mm) Photo: the handle's depth at its narrowest (the arrows stop short of the handle's edges). | Cherry TM-G84 tool manual (Rev H, 2015), p.3, p.3 dimensioned photo ↗ |
| Tool height | 13.25 in | 13-1/4" (336.6 mm) Photo: the head's top to the base cover's lowest point. | Cherry TM-G84 tool manual (Rev H, 2015), p.3, p.3 dimensioned photo ↗ |
| As drawn (feature not labeled) | 6.25 in | 6-1/4" (158.8 mm) Photo: across the base, its left edge to the valve housing's face. The photo spans it 287 px, 6.52 in. at the scale of the head's 5-11/16 and the handle's 2-1/8 (the base stands nearer the camera); not used in the model, which keeps the photo's base. | Cherry TM-G84 tool manual (Rev H, 2015), p.3, p.3 dimensioned photo ↗ |
As printed in the fastener process documents
- Length (as dimensioned): 13 1/4" (336,55 mm) (CherryMAX, Cherry CA-1015 (CherryMAX process manual), p.21, CherryMAX Tooling (-8 Diameter) ↗)
- Air pressure: 90-110 psi (6,2-7,6 bar) (CherryMAX, Cherry CA-1015 (CherryMAX process manual), p.21, CherryMAX Tooling (-8 Diameter) ↗)
- Stroke: 0.562 inch (14,28 mm) (CherryMAX, Cherry CA-1015 (CherryMAX process manual), p.21, CherryMAX Tooling (-8 Diameter) ↗)
- Pulling force: 5750 lbs. @ 100 PSI (26,1 KN @6.89 bar) (CherryMAX, Cherry CA-1015 (CherryMAX process manual), p.21, CherryMAX Tooling (-8 Diameter) ↗)
- Weight: 7.7 lbs. (3,49 kg) (CherryMAX, Cherry CA-1015 (CherryMAX process manual), p.21, CherryMAX Tooling (-8 Diameter) ↗)
- Height, inches: 13.25 (Cherry Maxibolt, Cherry CA-1039 (MAXIBOLT process manual), p.23, Installation Tool Selection Chart ↗)
- Base dia., inches: 6.25 (Cherry Maxibolt, Cherry CA-1039 (MAXIBOLT process manual), p.23, Installation Tool Selection Chart ↗)
- Pulling capacity: 5750 (Cherry Maxibolt, Cherry CA-1039 (MAXIBOLT process manual), p.23, Installation Tool Selection Chart ↗)
- Weight, lbs.: 7.7 (Cherry Maxibolt, Cherry CA-1039 (MAXIBOLT process manual), p.23, Installation Tool Selection Chart ↗)
Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.