← Tooling compatibility finder

GB731

GB731 pneudraulic installation tool · Installation tool · Gage Bilt

GB731 installs NAS tension and NAS shear lockbolts -5, -6, -8 with nose NASS05-2480-20, NAST05-2480-20, NAS06-2480-20 or NAS08-2480-20.

Catalog noteDetails
"Designed to install aerospace lockbolts and blind rivets": GP®, LGP® and NAS Shear and Tension lockbolts 1/8 thru 1/4 (PDF p.2).
Loading 3D view...
Traced reference model. Not for machining or verified fit.

Traced from 2 manufacturer views, with published dimensions held fixed. Other shapes and unseen depths are inferred.

Built from 12 printed dimensions, 28 scaled from the figure.Details

Reference reconstruction traced from manufacturer views and constrained by printed dimensions. Undimensioned shapes and depths are inferred and labelled; omitted features mean this is not a guaranteed clearance boundary. NOT a manufacturing model or manufacturer CAD. Jaws and internal parts are not modelled. Verify fit and clearance against current manufacturer data and the physical tool.

Scaled from the catalog figure, not dimensioned

  • Adapter hex: across flats: 1.10 in (scaled from Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13) p.1, GB731 side view, not dimensioned)
  • Adapter hex front: across flats: 1.10 in (scaled from Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13) p.1, GB731 side view, not dimensioned)
  • Adapter thread: crest spacing (as drawn; not a thread specification): 0.05 in (scaled from Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13) p.1, GB731 side view, not dimensioned)
  • Adapter collar: largest diameter: 0.94 in (scaled from Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13) p.1, GB731 side view, not dimensioned)
  • Head cylinder: largest diameter: 1.94 in (scaled from Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13) p.1, GB731 side view, not dimensioned)
  • End cap: across flats: 1.69 in (scaled from Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13) p.1, GB731 side view, not dimensioned)
  • Pintail deflector: largest diameter: 0.94 in (scaled from Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13) p.1, GB731 side view, not dimensioned)
  • Deflector outlet: side outline (length): 0.82 in (scaled from Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13) p.1, GB731 side view, not dimensioned)
  • Deflector outlet: width: 0.94 in (scaled from Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13) p.1, GB731 side view, not dimensioned)
  • Bleeder screw front: largest diameter: 0.35 in (scaled from Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13) p.1, GB731 side view, not dimensioned)
  • Bleeder screw rear: largest diameter: 0.35 in (scaled from Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13) p.1, GB731 side view, not dimensioned)
  • Head cylinder web: side outline (length): 2.38 in (scaled from Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13) p.1, GB731 side view, not dimensioned)
  • Head cylinder web: width: 1.66 in (scaled from Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13) p.1, GB731 front view, not dimensioned)
  • Head cylinder flange: side outline (length): 2.50 in (scaled from Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13) p.1, GB731 side view, not dimensioned)
  • Head cylinder flange: width: 1.85 in (scaled from Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13) p.1, GB731 front view, not dimensioned)
  • Handle top: side outline (length): 3.58 in (scaled from Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13) p.1, GB731 side view, not dimensioned)
  • Handle top: width: 1.85 in (scaled from Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13) p.1, GB731 front view, not dimensioned)
  • Grip: side outline (length): 3.75 in (scaled from Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13) p.1, GB731 side view, not dimensioned)
  • Grip: end view outline (widest): 2.65 in (scaled from Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13) p.1, GB731 front view, not dimensioned)
  • Base: largest diameter: 3.76 in (scaled from Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13) p.1, GB731 side view, not dimensioned)
  • Air valve housing: side outline (length): 1.63 in (scaled from Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13) p.1, GB731 side view, not dimensioned)
  • Air valve housing: width: 3.59 in (scaled from Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13) p.1, GB731 front view, not dimensioned)
  • Base cover: largest diameter: 3.88 in (scaled from Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13) p.1, GB731 side view, not dimensioned)
  • Actuator lever: side outline (length): 0.33 in (scaled from Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13) p.1, GB731 side view, not dimensioned)
  • Actuator lever: width: 0.51 in (scaled from Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13) p.1, GB731 front view, not dimensioned)
  • Actuator assembly-air: across flats: 0.61 in (scaled from Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13) p.1, GB731 side view, not dimensioned)
  • Stop plate: side outline (length): 0.62 in (scaled from Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13) p.1, GB731 side view, not dimensioned)
  • Stop plate: width: 1.00 in (scaled from Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13) p.1, GB731 front view, not dimensioned)
  • Built from the Gage Bilt GB731 flyer's front and side views (page 1, the GB731 render; the GB731SH and GB731SR split-handle variants on the same page are not modelled). Part names follow the GB731 manual (Rev. 8/26): head cylinder (731198), end cap (731417), pintail deflector (752122), handle assembly (722132), base cover (704125), actuator lever assembly (704343), actuator assembly-air (704130), bleeder screws (402482); the manual has no parts list, so the hex and thread at the head's front are named as drawn (an adapter).
  • Front of the tool to the left (-x): x = 0 at the base cover's front, y = 0 on the floor. The head tilts 10 deg, front end up; its lengths (7.41, 4.80, 2.27) run along its axis.
  • The side view prints 1.25 (31.8 mm) across the adapter hex as well as across the grip: the hex's corners are mapped through its extension lines (121 px apart); the hex is drawn 123 px across its corners, so it is modelled 1.27 across them.

Not modelled

    Everything it installs1 fastener group
    Other brands' equivalents2 statements
    Sources3
    Published dimensions15 · for envelope CAD
    FeatureValueAs printedSource
    Weight5.6 lb5.6 poundsGage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.2, GB731 ↗
    Stroke0.6 in.600 strokeGage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.2, GB731 ↗
    Pull force4800 lbf4800 lb. (21.35kN) pull forceGage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.2, GB731 ↗
    Tool length7.41 in7.41 (188.2 mm)

    Head length along its axis: the adapter hex's front to the pintail deflector's tip (side view).

    Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13), p.1, GB731 front and side views ↗
    As drawn (feature not labeled)4.8 in4.80 (121.8 mm)

    Along the head axis: the adapter hex's front to the end cap's back face (side view).

    Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13), p.1, GB731 front and side views ↗
    As drawn (feature not labeled)2.27 in2.27 (57.7 mm)

    Along the head axis: the adapter hex's front to the head cylinder barrel's front face (side view).

    Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13), p.1, GB731 front and side views ↗
    Tool height12.67 in12.67 (321.8 mm)

    Floor to the top of the bleeder screw on the head cylinder.

    Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13), p.1, GB731 front and side views ↗
    As drawn (feature not labeled)5.15 in5.15 (130.8 mm)

    Floor to the base's top face (side view).

    Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13), p.1, GB731 front and side views ↗
    As drawn (feature not labeled)5.07 in5.07 (128.8 mm)

    Base depth: the base cover's front to the air valve housing's back (side view).

    Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13), p.1, GB731 front and side views ↗
    As drawn (feature not labeled)1.92 in1.92 (48.8 mm)

    Grip depth (side view).

    Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13), p.1, GB731 front and side views ↗
    As drawn (feature not labeled)1.25 in1.25 (31.8 mm)

    Grip width (front view).

    Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13), p.1, GB731 front and side views ↗
    As drawn (feature not labeled)1.25 in1.25 (31.8 mm)

    Across the adapter hex at the head's front, between its corners (side view).

    Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13), p.1, GB731 front and side views ↗
    Base diameter3.88 inØ3.88 (98.6 mm)

    Base cover diameter (front view).

    Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13), p.1, GB731 front and side views ↗
    Body diameter1.94 inØ1.94 (49.3 mm)

    Head cylinder barrel diameter (front view).

    Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13), p.1, GB731 front and side views ↗
    As drawn (feature not labeled)1.36 inØ1.36 (34.5 mm)

    Head cylinder nose diameter, in front of the barrel (front view).

    Gage Bilt GB731 flyer (no revision printed; PDF created 2026-08-13), p.1, GB731 front and side views ↗

    Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.

    Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers

    Next step

    Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

    Find tooling for a part number →Tooling shop →