← Tooling compatibility finder

H828-8

H828-8 Right Angle Pulling Head · Nose / pulling head · Cherry · Right angle

H828-8 installs CherryMAX® blind rivet -8 on a G84 with adapter 744-200.

Catalog noteDetails
"* Use adapter 744-200" on the G83A/84 (©2015 guide p.26); SpecLok lists it on the G84 only, the one tool CA-1015 p.5 shades for -8 CherryMAX®. No drawing in either catalog edition.
Loading 3D view...
Traced reference model. Not for machining or verified fit.

Traced from 2 manufacturer views, with published dimensions held fixed. Other shapes and unseen depths are inferred.

Built from 6 printed dimensions, 8 scaled from the figure.Details

Reference reconstruction traced from manufacturer views and constrained by printed dimensions. Undimensioned shapes and depths are inferred and labelled; omitted features mean this is not a guaranteed clearance boundary. NOT a manufacturing model or manufacturer CAD. Jaws and internal parts are not modelled. Verify fit and clearance against current manufacturer data and the physical tool.

Scaled from the catalog figure, not dimensioned

  • Nosepiece: largest diameter: 0.53 in (scaled from Cherry TS-H828-8 technical data sheet (Rev A, 5 Feb 07) p.1, Figure 1, side view (section), not dimensioned)
  • Sleeve: largest diameter: 1.03 in (scaled from Cherry TS-H828-8 technical data sheet (Rev A, 5 Feb 07) p.1, Figure 1, side view (section), not dimensioned)
  • Frame: side outline (length): 2.99 in (scaled from Cherry TS-H828-8 technical data sheet (Rev A, 5 Feb 07) p.1, Figure 1, side view (section), not dimensioned)
  • Adapter fitting hex: across flats: 0.92 in (scaled from Cherry TS-H828-8 technical data sheet (Rev A, 5 Feb 07) p.1, Figure 1, side view (section), not dimensioned)
  • Adapter fitting neck: largest diameter: 0.78 in (scaled from Cherry TS-H828-8 technical data sheet (Rev A, 5 Feb 07) p.1, Figure 1, side view (section), not dimensioned)
  • Jam nut: across flats: 1.06 in (scaled from Cherry TS-H828-8 technical data sheet (Rev A, 5 Feb 07) p.1, Figure 1, side view (section), not dimensioned)
  • Adapter fitting thread: crest spacing (as drawn; not a thread specification): 0.05 in (scaled from Cherry TS-H828-8 technical data sheet (Rev A, 5 Feb 07) p.1, Figure 1, side view (section), not dimensioned)
  • Adapter fitting end: largest diameter: 0.78 in (scaled from Cherry TS-H828-8 technical data sheet (Rev A, 5 Feb 07) p.1, Figure 1, side view (section), not dimensioned)
  • Nose to the left (-x), mount at the bottom, as Figure 1 draws it. Parts named from the p.2 parts list: -8 nosepiece (1), sleeve (2), frame (8), adapter fitting (9), jam nut (10). The side view is a full section; only its outer outline is modelled.

Not modelled

    Everything it installs1 fastener group

    CherryMAX® blind rivet (NAS9301 to NAS9312 / CR3213 to CR3555P) -8, per the Cherry catalog

    Other brands' equivalents0 statements

    No cross-brand statement on file for these tools. Not documented is not the same as incompatible.

    Sources1
    1. Cherry Fastening Systems for Aerospace Tool Catalog (©2015 edition, archived), p.26, CherryMAX® Blind Rivets & Tools, Cherry Power Tools ↗
      • "* Use adapter 744-200". p.26 prints "G83A/84"; G84 only here (CA-1015 p.5 shades -8 for the G84 only).

    Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.

    Published dimensions6 · for envelope CAD
    FeatureValueAs printedSource
    As drawn (feature not labeled)3.75 in3-3/4

    Side view: the nosepiece's tip to the frame's back.

    Cherry TS-H828-8 technical data sheet (Rev A, 5 Feb 07), p.1, Figure 1 ↗
    As drawn (feature not labeled)2.875 in2-7/8

    Side view: the nosepiece's tip to the back face of the head.

    Cherry TS-H828-8 technical data sheet (Rev A, 5 Feb 07), p.1, Figure 1 ↗
    As drawn (feature not labeled)1.625 in1-5/8

    Side view: the nosepiece's tip to the front face of the frame's leg.

    Cherry TS-H828-8 technical data sheet (Rev A, 5 Feb 07), p.1, Figure 1 ↗
    As drawn (feature not labeled)0.5 in1/2

    Side view: the fastener centreline to the top of the head.

    Cherry TS-H828-8 technical data sheet (Rev A, 5 Feb 07), p.1, Figure 1 ↗
    As drawn (feature not labeled)6.375 in6-3/8

    Rear view: the top of the head to the lower face of the jam nut.

    Cherry TS-H828-8 technical data sheet (Rev A, 5 Feb 07), p.1, Figure 1 ↗
    Head width1 in1

    Rear view: the frame's width.

    Cherry TS-H828-8 technical data sheet (Rev A, 5 Feb 07), p.1, Figure 1 ↗

    Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.

    On the floor:Low clearance puller finderRight angle CherryMAX puller: heads and dimensions

    Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers

    Next step

    Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

    Find tooling for a part number →Tooling shop →