← Tooling compatibility finder
H827-8
H827-8 Offset Pulling Head · Nose / pulling head · Cherry · Offset
H827-8 installs CherryMAX® blind rivet -8 on a G84 with adapter 744-200.
Catalog noteDetails
Traced from 2 manufacturer views, with published dimensions held fixed. Other shapes and unseen depths are inferred.
Built from 7 printed dimensions, 11 scaled from the figure.Details
Reference reconstruction traced from manufacturer views and constrained by printed dimensions. Undimensioned shapes and depths are inferred and labelled; omitted features mean this is not a guaranteed clearance boundary. NOT a manufacturing model or manufacturer CAD. Jaws and internal parts are not modelled. Verify fit and clearance against current manufacturer data and the physical tool.
- 5.03 Guard front face to the jam nut's back face · Cherry TS-H827-8 instruction sheet (Rev C, 26 Aug 14), p.1, side and end views
- 1.70 Guard front face to the snubber's back face · Cherry TS-H827-8 instruction sheet (Rev C, 26 Aug 14), p.1, side and end views
- .23 Guard thickness · Cherry TS-H827-8 instruction sheet (Rev C, 26 Aug 14), p.1, side and end views
- 2.21 Top of the guard to the bottom of the frame · Cherry TS-H827-8 instruction sheet (Rev C, 26 Aug 14), p.1, side and end views
- 1.38 Fastener centreline to tool centreline · Cherry TS-H827-8 instruction sheet (Rev C, 26 Aug 14), p.1, side and end views
- .89 Frame width (end view) · Cherry TS-H827-8 instruction sheet (Rev C, 26 Aug 14), p.1, side and end views
- R.375 Guard radius about the fastener centreline (end view R.375) · Cherry TS-H827-8 instruction sheet (Rev C, 26 Aug 14), p.1, side and end views
Scaled from the catalog figure, not dimensioned
- Guard: largest diameter: 0.78 in (scaled from Cherry TS-H827-8 instruction sheet (Rev C, 26 Aug 14) p.1, side view, not dimensioned)
- Frame: side outline (length): 3.30 in (scaled from Cherry TS-H827-8 instruction sheet (Rev C, 26 Aug 14) p.1, side view, not dimensioned)
- Frame: end view outline (widest): 0.92 in (scaled from Cherry TS-H827-8 instruction sheet (Rev C, 26 Aug 14) p.1, end view, not dimensioned)
- Frame: slot through the side (height): 0.22 in (scaled from Cherry TS-H827-8 instruction sheet (Rev C, 26 Aug 14) p.1, side view, not dimensioned)
- Roll pin: diameter: 0.16 in (scaled from Cherry TS-H827-8 instruction sheet (Rev C, 26 Aug 14) p.1, side view, not dimensioned)
- Snubber assy: largest diameter: 0.59 in (scaled from Cherry TS-H827-8 instruction sheet (Rev C, 26 Aug 14) p.1, side view, not dimensioned)
- Frame shank: largest diameter: 0.90 in (scaled from Cherry TS-H827-8 instruction sheet (Rev C, 26 Aug 14) p.1, side view, not dimensioned)
- Mount thread front: largest diameter: 0.84 in (scaled from Cherry TS-H827-8 instruction sheet (Rev C, 26 Aug 14) p.1, side view, not dimensioned)
- Jam nut: across flats: 1.03 in (scaled from Cherry TS-H827-8 instruction sheet (Rev C, 26 Aug 14) p.1, side view, not dimensioned)
- Mount thread rear: largest diameter: 0.83 in (scaled from Cherry TS-H827-8 instruction sheet (Rev C, 26 Aug 14) p.1, side view, not dimensioned)
- Mount end: largest diameter: 0.80 in (scaled from Cherry TS-H827-8 instruction sheet (Rev C, 26 Aug 14) p.1, side view, not dimensioned)
- Fastener axis on top, tool axis below (1.38 apart), guard to the left (-x) as the side view draws it. Parts named from the p.2 parts list: guard (2), frame (9), snubber assy (6), jam nut (8), roll pin (10); the nosepiece (1), drawbolt (3), jaws (4) and drawbolt extension (7) are inside the frame and not modelled.
- The .625 stroke (drawn as a dashed phantom behind the snubber) is listed with the dimensions but not modelled as a solid.
Not modelled
Everything it installs1 fastener group
CherryMAX® blind rivet (NAS9301 to NAS9312 / CR3213 to CR3555P) -8, per the Cherry catalog
- H827-8(-8)onG84+ adapter744-200Cherry 2015 catalog p.26 ↗
Other brands' equivalents1 statement
- Gage Bilt says 08MAX-744A-50OS replaces H827-8 (Cherry) Gage Bilt 2017 p.156 ↗
Gage Bilt's cross-reference lists 08MAX-744A-50OS (nose assembly - offset) for H827-8.
Sources2
- Cherry Fastening Systems for Aerospace Tool Catalog (©2015 edition, archived), p.26, CherryMAX® Blind Rivets & Tools, Cherry Power Tools ↗
- "* Use adapter 744-200". p.26 prints "G83A/84"; G84 only here (CA-1015 p.5 shades -8 for the G84 only).
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.156, Other - Gage Bilt Cross Reference, page 51 ↗
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Published dimensions8 · for envelope CAD
| Feature | Value | As printed | Source |
|---|---|---|---|
| As drawn (feature not labeled) | 5.03 in | 5.03 Side view: the guard's front face to the jam nut's back face. | Cherry TS-H827-8 instruction sheet (Rev C, 26 Aug 14), p.1, side and end views ↗ |
| As drawn (feature not labeled) | 1.7 in | 1.70 Side view: the guard's front face to the snubber assembly's back face (where the stroke starts). | Cherry TS-H827-8 instruction sheet (Rev C, 26 Aug 14), p.1, side and end views ↗ |
| Max stroke (as drawn) | 0.625 in | .625 STROKE* Side view: the drawbolt's stroke, drawn as a dashed phantom behind the snubber. | Cherry TS-H827-8 instruction sheet (Rev C, 26 Aug 14), p.1, side and end views ↗ |
| As drawn (feature not labeled) | 2.21 in | 2.21 Side view: the top of the guard and head to the bottom of the frame. | Cherry TS-H827-8 instruction sheet (Rev C, 26 Aug 14), p.1, side and end views ↗ |
| Offset head height | 1.38 in | 1.38 Side view: the fastener centreline to the tool centreline (the offset). | Cherry TS-H827-8 instruction sheet (Rev C, 26 Aug 14), p.1, side and end views ↗ |
| As drawn (feature not labeled) | 0.23 in | .23 Side view: the guard's thickness (its front face to the frame's front face). | Cherry TS-H827-8 instruction sheet (Rev C, 26 Aug 14), p.1, side and end views ↗ |
| Head width | 0.89 in | .89 End view: the frame's width. | Cherry TS-H827-8 instruction sheet (Rev C, 26 Aug 14), p.1, side and end views ↗ |
| As drawn (feature not labeled) | 0.375 in | R.375 End view: radius of the guard and the head's round top about the fastener centreline. | Cherry TS-H827-8 instruction sheet (Rev C, 26 Aug 14), p.1, side and end views ↗ |
Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.
On the floor:Low clearance puller finderLow profile CherryMAX puller: printed head heights
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.