← Tooling compatibility finder
H680B200A
H680B200A Straight Pulling Head · Nose / pulling head · Cherry · Standard
H680B200A installs CherryMAX® blind rivet -4, -5, -6 on a G784.
Catalog noteDetails
Traced from 1 manufacturer view, with published dimensions held fixed. Other shapes and unseen depths are inferred.
Built from 4 printed dimensions, 3 scaled from the figure.Details
Reference reconstruction traced from manufacturer views and constrained by printed dimensions. Undimensioned shapes and depths are inferred and labelled; omitted features mean this is not a guaranteed clearance boundary. NOT a manufacturing model or manufacturer CAD. Jaws and internal parts are not modelled. Verify fit and clearance against current manufacturer data and the physical tool.
- 3 5/32" Sleeve tip to the sleeve adapter's back face · Cherry TS-H680B200A instruction sheet (Rev A, 5 Feb 07), p.1, side view drawing
- 3/4" Sleeve tip to the sleeve adapter's front face · Cherry TS-H680B200A instruction sheet (Rev A, 5 Feb 07), p.1, side view drawing
- 5/8" Sleeve diameter · Cherry TS-H680B200A instruction sheet (Rev A, 5 Feb 07), p.1, side view drawing
- 25/32" Sleeve adapter diameter · Cherry TS-H680B200A instruction sheet (Rev A, 5 Feb 07), p.1, side view drawing
Scaled from the catalog figure, not dimensioned
- Sleeve: largest diameter: 0.63 in (scaled from Cherry TS-H680B200A instruction sheet (Rev A, 5 Feb 07) p.1, side view drawing, not dimensioned)
- Jam nut: largest diameter: 0.65 in (scaled from Cherry TS-H680B200A instruction sheet (Rev A, 5 Feb 07) p.1, side view drawing, not dimensioned)
- Sleeve adapter: largest diameter: 0.88 in (scaled from Cherry TS-H680B200A instruction sheet (Rev A, 5 Feb 07) p.1, side view drawing, not dimensioned)
- One side view (TS-H680B200A p.1); turned about the fastener axis. The sleeve adapter's rear collar seats against the riveter's knurled cap (mounting step 3); the cap belongs to the riveter and is not modelled.
- The source draws no front or end view: widths across are scaled by the rules listed with the values.
Not modelled
Everything it installs1 fastener group
CherryMAX® blind rivet (NAS9301 to NAS9312 / CR3213 to CR3555P) -4, -5, -6, per the Cherry catalog
- H680B200A(-4, -5, -6)onG784Cherry 2015 catalog p.26 ↗
Fastener process documents that name it1
- Cherry SST -4, -5, -6 Cherry CA-1037 p.11 ↗
Other brands' equivalents1 statement
- Gage Bilt says 456MAX-680-31 replaces H680B200A (Cherry) Gage Bilt 2017 p.155 ↗
Gage Bilt's cross-reference lists 456MAX-680-31 (nose assembly) for H680B200A.
Sources3
- Cherry Fastening Systems for Aerospace Tool Catalog (©2015 edition, archived), p.26, CherryMAX® Blind Rivets & Tools, Cherry Power Tools ↗
- CA-1015 p.5 shades G784 + H680B200A for nominal and oversize -4, -5, -6; p.21: "The use of these riveters is not preferred".
- Cherry CA-1037 (Cherry SST), p.11, Installation Tooling, Tool Selection Chart ↗
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.155, Other - Gage Bilt Cross Reference, page 50 ↗
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Published dimensions4 · for envelope CAD
| Feature | Value | As printed | Source |
|---|---|---|---|
| Overall length | 3.15625 in | 3 5/32" Side view: the sleeve's tip face to the sleeve adapter's back face. | Cherry TS-H680B200A instruction sheet (Rev A, 5 Feb 07), p.1, side view drawing ↗ |
| As drawn (feature not labeled) | 0.75 in | 3/4" Side view: the sleeve's tip face to the sleeve adapter's front face (where the jam nut stops). | Cherry TS-H680B200A instruction sheet (Rev A, 5 Feb 07), p.1, side view drawing ↗ |
| Nose diameter | 0.625 in | 5/8" Side view: the sleeve's diameter. | Cherry TS-H680B200A instruction sheet (Rev A, 5 Feb 07), p.1, side view drawing ↗ |
| Body diameter | 0.78125 in | 25/32" Side view: the sleeve adapter's diameter. | Cherry TS-H680B200A instruction sheet (Rev A, 5 Feb 07), p.1, side view drawing ↗ |
Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.
On the floor:Low clearance puller finderLow profile CherryMAX puller: printed head heights
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.