← Tooling compatibility finder

456MAX-704-35

456MAX-704-35 straight nose assembly · Nose / pulling head · Gage Bilt · Standard

456MAX-704-35 installs CherryMAX® -5 on a GB704.

Catalog noteDetails
Listed at 5/32 on the GB704 chart; note 2: "installs 1/8", 5/32", and 3/16" diameters".
Loading 3D view...
Traced reference model. Not for machining or verified fit.

Traced from 1 manufacturer view, with published dimensions held fixed. Other shapes and unseen depths are inferred.

Built from 3 printed dimensions, 6 scaled from the figure.Details

Reference reconstruction traced from manufacturer views and constrained by printed dimensions. Undimensioned shapes and depths are inferred and labelled; omitted features mean this is not a guaranteed clearance boundary. NOT a manufacturing model or manufacturer CAD. Jaws and internal parts are not modelled. Verify fit and clearance against current manufacturer data and the physical tool.

Scaled from the catalog figure, not dimensioned

  • Anvil: largest diameter: 0.75 in (scaled from Gage Bilt 456MAX-704-35 nose assembly data sheet (Rev. 10/25) p.1, side view, not dimensioned)
  • Anvil: bore diameter: 0.12 in (scaled from Gage Bilt 456MAX-704-35 nose assembly data sheet (Rev. 10/25) p.1, side view, not dimensioned)
  • Jam nut: across flats: 0.85 in (scaled from Gage Bilt 456MAX-704-35 nose assembly data sheet (Rev. 10/25) p.1, side view, not dimensioned)
  • Collet bolt thread: crest spacing (as drawn; not a thread specification): 0.05 in (scaled from Gage Bilt 456MAX-704-35 nose assembly data sheet (Rev. 10/25) p.1, side view, not dimensioned)
  • Collet bolt end: largest diameter: 0.69 in (scaled from Gage Bilt 456MAX-704-35 nose assembly data sheet (Rev. 10/25) p.1, side view, not dimensioned)
  • Tube: largest diameter: 0.21 in (scaled from Gage Bilt 456MAX-704-35 nose assembly data sheet (Rev. 10/25) p.1, side view, not dimensioned)
  • Built from the Gage Bilt data sheet's side and end views (rendered images). Part names follow its parts list: anvil, jam nut, collet bolt, tube.
  • The end view is read for sizes but not silhouette-checked: the end view's jam nut is drawn as an irregular hex (a render); the end view gives the bore and the hex's corners and flats only.

Not modelled

    Everything it installs1 fastener group

    CherryMAX® (GB704 Nose Assembly Selection Chart) -5, per the Gage Bilt catalog

    Other brands' equivalents0 statements

    No cross-brand statement on file for these tools. Not documented is not the same as incompatible.

    Sources1
    1. Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.41, GB704 Nose Assembly Selection Chart ↗
      • GB704 chart; note 2: "installs 1/8", 5/32", and 3/16" diameters". The chart names CherryMAX®, not Allmax® or HuckMAX®.

    Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.

    Published dimensions4 · for envelope CAD
    FeatureValueAs printedSource
    Length from tool face3.5 inNot printed as a number. Read from the part number: "-35" = 3.5 in. by the chart's note

    "The last 2 digits of the nose assembly represents the length the nose extends from the tool i.e. -20 = 2.0 inches" (note on this chart, PDF p.41). The same catalog draws 456MAX-701-17 at 1.75 in., so the rule is approximate.

    Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.41, GB704 Nose Assembly Selection Chart ↗
    As drawn (feature not labeled)3.38 in3.38 (85.8 mm)

    Side view: the tip to the jam nut's front face.

    Gage Bilt 456MAX-704-35 nose assembly data sheet (Rev. 10/25), p.1, Nose assembly data sheet, side view ↗
    Nose diameter0.75 inØ.75 (19 mm)Gage Bilt 456MAX-704-35 nose assembly data sheet (Rev. 10/25), p.1, Nose assembly data sheet, end view ↗
    As drawn (feature not labeled)0.95 inØ.95 (24 mm)

    End view: across the jam nut's corners.

    Gage Bilt 456MAX-704-35 nose assembly data sheet (Rev. 10/25), p.1, Nose assembly data sheet, end view ↗

    Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.

    On the floor:Low clearance puller finder

    Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers

    Next step

    Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

    Find tooling for a part number →Tooling shop →