← Tooling compatibility finder
H513-05-35
H513-05-35 Straight Lockbolt Pulling Head, -5 · Nose / pulling head · Cherry · Standard
H513-05-35 installs Pull type lockbolt -5 on a G83A.
Catalog noteDetails
Traced from 2 manufacturer views, with published dimensions held fixed. Other shapes and unseen depths are inferred.
Built from 7 printed dimensions, 6 scaled from the figure.Details
Reference reconstruction traced from manufacturer views and constrained by printed dimensions. Undimensioned shapes and depths are inferred and labelled; omitted features mean this is not a guaranteed clearance boundary. NOT a manufacturing model or manufacturer CAD. Jaws and internal parts are not modelled. Verify fit and clearance against current manufacturer data and the physical tool.
- 3.5 Tip to the gun line (the bayonet lugs' front faces) · Cherry TS-H513-05-35 technical data sheet (Rev AB, 13 Sep 11), p.1, Dimensional Data
- .10 Bayonet lug length · Cherry TS-H513-05-35 technical data sheet (Rev AB, 13 Sep 11), p.1, Dimensional Data
- .81 Lugs' back faces to the chuck collet's end · Cherry TS-H513-05-35 technical data sheet (Rev AB, 13 Sep 11), p.1, Dimensional Data
- 1.22 Anvil's back end to the chuck collet's end · Cherry TS-H513-05-35 technical data sheet (Rev AB, 13 Sep 11), p.1, Dimensional Data
- Ø.75 Anvil front diameter · Cherry TS-H513-05-35 technical data sheet (Rev AB, 13 Sep 11), p.1, Dimensional Data
- Ø.86 Across the bayonet lugs · Cherry TS-H513-05-35 technical data sheet (Rev AB, 13 Sep 11), p.1, Dimensional Data
- Ø.81 Anvil rear diameter (end view) · Cherry TS-H513-05-35 technical data sheet (Rev AB, 13 Sep 11), p.1, Dimensional Data
Scaled from the catalog figure, not dimensioned
- Anvil: largest diameter: 0.81 in (scaled from Cherry TS-H513-05-35 technical data sheet (Rev AB, 13 Sep 11) p.1, Dimensional Data, side view, not dimensioned)
- Chuck collet: largest diameter: 0.75 in (scaled from Cherry TS-H513-05-35 technical data sheet (Rev AB, 13 Sep 11) p.1, Dimensional Data, side view, not dimensioned)
- Bayonet lug upper: side outline (length): 0.10 in (scaled from Cherry TS-H513-05-35 technical data sheet (Rev AB, 13 Sep 11) p.1, Dimensional Data, side view, not dimensioned)
- Bayonet lug upper: end view outline (widest): 0.48 in (scaled from Cherry TS-H513-05-35 technical data sheet (Rev AB, 13 Sep 11) p.1, Dimensional Data, end view, not dimensioned)
- Bayonet lug lower: side outline (length): 0.10 in (scaled from Cherry TS-H513-05-35 technical data sheet (Rev AB, 13 Sep 11) p.1, Dimensional Data, side view, not dimensioned)
- Bayonet lug lower: end view outline (widest): 0.48 in (scaled from Cherry TS-H513-05-35 technical data sheet (Rev AB, 13 Sep 11) p.1, Dimensional Data, end view, not dimensioned)
- Tip to the left (-x); x = 0 at the gun line (the bayonet lugs' front faces). Parts named from the p.2 parts list: anvil (1), chuck collet (2) with its bayonet lugs; the jaws, follower, spring, sleeve, shim and collet adaptor are inside and not modelled.
Not modelled
Everything it installs1 fastener group
Pull type lockbolt (NAS1446-1452 to NAS6946-6952) -5, per the Cherry catalog
Other brands' equivalents2 statements
- Cherry says H513-05-35 fits Huck 352 (direct); Huck 353 with the 552 adapter (Huck) Cherry CA-1001 p.10 ↗
"Parts with an asterisk fit directly on the Cherry G83A or Huck®352 tools"; they "require the 552 adapter when used on Cherry G87D, G85D or Huck®353."
- Gage Bilt says NAST05-2480-45 replaces H513-05-35 (Cherry) Gage Bilt 2017 p.154 ↗
Gage Bilt's cross-reference lists NAST05-2480-45 (nose assembly) for H513-05-35. Gage Bilt's GB731NASK chart (PDF p.57) gives 5/32" shear lockbolts NASS05 noses and 5/32" tension lockbolts NAST05 noses.
Sources3
- Cherry Fastening Systems for Aerospace Tool Catalog (©2015 edition, archived), p.32, Pull Type Lockbolts & Tools, Cherry Power Tools ↗
- "* Refer to H513 pulling head chart for alternate part numbers."
- Cherry CA-1001 Tool Catalog (2017), p.10, G87D Pulling Head Selection Chart, notes ↗
- "*These parts require the 552 adapter when used on Cherry G87D, G85D or Huck®353." The lockbolt bases are the ©2015 guide's (p.32).
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.154, Other - Gage Bilt Cross Reference, page 49 ↗
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Published dimensions9 · for envelope CAD
| Feature | Value | As printed | Source |
|---|---|---|---|
| Length from tool face | 3.5 in | 3.5" (Length from Tool Face column) "Straight Lockbolt pulling head part numbers indicate pulling head length and diameter ... -35 indicates that the pulling head extends 3.5" beyond gun line." | Cherry CA-1001 Tool Catalog (2017), p.10, G87D Pulling Head Selection Chart ↗ |
| As drawn (feature not labeled) | 3.5 in | 3.5 Side view: the tip to the bayonet lugs' front faces (the gun line). | Cherry TS-H513-05-35 technical data sheet (Rev AB, 13 Sep 11), p.1, Dimensional Data ↗ |
| As drawn (feature not labeled) | 0.1 in | .10 Side view: the bayonet lugs' length. | Cherry TS-H513-05-35 technical data sheet (Rev AB, 13 Sep 11), p.1, Dimensional Data ↗ |
| As drawn (feature not labeled) | 0.81 in | .81 Side view: the lugs' back faces to the chuck collet's back end. | Cherry TS-H513-05-35 technical data sheet (Rev AB, 13 Sep 11), p.1, Dimensional Data ↗ |
| As drawn (feature not labeled) | 1.22 in | 1.22 Side view: the anvil's back end to the chuck collet's back end. | Cherry TS-H513-05-35 technical data sheet (Rev AB, 13 Sep 11), p.1, Dimensional Data ↗ |
| Nose diameter | 0.75 in | Ø.75 Side view: the anvil's front diameter (and the chuck collet's). | Cherry TS-H513-05-35 technical data sheet (Rev AB, 13 Sep 11), p.1, Dimensional Data ↗ |
| As drawn (feature not labeled) | 0.86 in | Ø.86 Side view: across the bayonet lugs. | Cherry TS-H513-05-35 technical data sheet (Rev AB, 13 Sep 11), p.1, Dimensional Data ↗ |
| Body diameter | 0.81 in | Ø.81 End view: the anvil's rear diameter. | Cherry TS-H513-05-35 technical data sheet (Rev AB, 13 Sep 11), p.1, Dimensional Data ↗ |
| As drawn (feature not labeled) | 0.7 in | .7 End view: drawn between the lugs' bases, on the side view's Ø.75 lines (it measures .75 at the drawing's scale); not used in the model: the side view draws no flats .7 across. | Cherry TS-H513-05-35 technical data sheet (Rev AB, 13 Sep 11), p.1, Dimensional Data ↗ |
Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.
On the floor:Low clearance puller finderLow profile CherryMAX puller: printed head heights
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.