← Tooling compatibility finder
NAST05-2480-45
NAST05-2480-45 (nose assembly) · Nose / pulling head · Gage Bilt · Standard
No fastener installation table on file names this part number.
Catalog noteDetails
Other brands' equivalents2 statements
- Gage Bilt says NAST05-2480-45 replaces H513-05-35 (Cherry) Gage Bilt 2017 p.154 ↗
Gage Bilt's cross-reference lists NAST05-2480-45 (nose assembly) for H513-05-35. Gage Bilt's GB731NASK chart (PDF p.57) gives 5/32" shear lockbolts NASS05 noses and 5/32" tension lockbolts NAST05 noses.
- Gage Bilt says NAST05-2480-45 replaces H513S-05-35 (Cherry) Gage Bilt 2017 p.154 ↗
Gage Bilt's cross-reference lists NAST05-2480-45 (nose assembly) for H513S-05-35. Gage Bilt's GB731NASK chart (PDF p.57) gives 5/32" shear lockbolts NASS05 noses and 5/32" tension lockbolts NAST05 noses.
Sources1
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Published dimensions1 · for envelope CAD
| Feature | Value | As printed | Source |
|---|---|---|---|
| Length from tool face | 4.5 in | NAST05-2480-45 ("-45" = 4.5 in. per the PN rule) "The last 2 digits of the nose assembly represents the length the nose extends from the tool i.e. -20 = 2.0 inches" (GB704 chart, PDF p.41). | Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.154, Other - Gage Bilt Cross Reference, page 49 ↗ |
Only dimensions a document prints are listed, with the feature each one measures. None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next · 3 Quote
Put the tool on the quote
Add to quote puts this PN on the one quote with its citation. Tooling needs no lot traceability.