← Tooling compatibility finder
H513S-12-42
H513S-12-42 Straight Lockbolt Pulling Head (swivel), -12 · Nose / pulling head · Cherry · Standard
H513S-12-42 installs Pull type lockbolt -12 on a G87D.
Catalog noteDetails
3D model not available: not enough printed dimensions: the tool sheet's isometric sketch prints lengths along the anvil only, no diameter. 3D library
Everything it installs1 fastener group
Pull type lockbolt (NAS1446-1452 to NAS6946-6952) -12, per the Cherry catalog
Other brands' equivalents2 statements
- Cherry says H513S-12-42 fits Huck 353 (direct) (Huck) Cherry CA-1001 p.10 ↗
"Parts with no asterisk fit directly on Cherry G87D, G85D and Huck®353 tools."
- Gage Bilt says NAS12-756-48 replaces H513S-12-42 (Cherry) Gage Bilt 2017 p.154 ↗
Gage Bilt's cross-reference lists NAS12-756-48 (nose assembly) for H513S-12-42.
Sources4
- Cherry Fastening Systems for Aerospace Tool Catalog (©2015 edition, archived), p.32, Pull Type Lockbolts & Tools, Cherry Power Tools ↗
- "* Refer to H513 pulling head chart for alternate part numbers."
- Cherry CA-1001 Tool Catalog (2017), p.11, G85D-S Lockbolt Pulling Head Selection Chart ↗
- CA-1001 p.11 G85D-S Lockbolt Pulling Head Selection Chart: -12, 4-3/16", Swivel H513S-12-42 (no asterisk: fits the G85D directly). The ©2015 guide p.32 lists the G85D-S to 5/16" only. The lockbolt bases are the p.32 guide's.
- Cherry CA-1001 Tool Catalog (2017), p.10, G87D Pulling Head Selection Chart, notes ↗
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.154, Other - Gage Bilt Cross Reference, page 49 ↗
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Published dimensions1 · for envelope CAD
| Feature | Value | As printed | Source |
|---|---|---|---|
| Length from tool face | 4.1875 in | 4.1875" (Length from Tool Face column) "Straight Lockbolt pulling head part numbers indicate pulling head length and diameter ... -35 indicates that the pulling head extends 3.5" beyond gun line." | Cherry CA-1001 Tool Catalog (2017), p.10, G87D Pulling Head Selection Chart ↗ |
Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.
On the floor:Low clearance puller finderLow profile CherryMAX puller: printed head heights
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.