← Tooling compatibility finder

H513S-06-24

H513S-06-24 Straight Lockbolt Pulling Head (swivel), -6 · Nose / pulling head · Cherry · Standard

H513S-06-24 installs Pull type lockbolt -6 on a G87D or G85D-S.

Catalog noteDetails
No asterisk: "Parts with no asterisk fit directly on Cherry G87D, G85D and Huck®353 tools."

3D model not available: not enough printed dimensions: the tool sheet's isometric sketch prints lengths along the anvil only, no diameter. 3D library

Everything it installs1 fastener group

Pull type lockbolt (NAS1446-1452 to NAS6946-6952) -6, per the Cherry catalog

Other brands' equivalents1 statement
Sources2
  1. Cherry Fastening Systems for Aerospace Tool Catalog (©2015 edition, archived), p.32, Pull Type Lockbolts & Tools, Cherry Power Tools ↗
    • "* Refer to H513 pulling head chart for alternate part numbers."
  2. Cherry CA-1001 Tool Catalog (2017), p.10, G87D Pulling Head Selection Chart, notes ↗

Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.

Published dimensions1 · for envelope CAD
FeatureValueAs printedSource
Length from tool face2.375 in2.375" (Length from Tool Face column)

"Straight Lockbolt pulling head part numbers indicate pulling head length and diameter ... -35 indicates that the pulling head extends 3.5" beyond gun line."

Cherry CA-1001 Tool Catalog (2017), p.10, G87D Pulling Head Selection Chart ↗

Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.

On the floor:Low clearance puller finderLow profile CherryMAX puller: printed head heights

Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers

Next step

Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

Find tooling for a part number →Tooling shop →