← Tooling compatibility finder
G704B
G704B Lightweight CherryMAX® Riveter · Installation tool · Cherry
G704B installs CherryMAX® blind rivet -4, -5, -6 with nose H701B-456, H747-456, H753A-456, H781A-456 or H782.
Catalog noteDetails
Traced from 1 manufacturer view, with published dimensions held fixed. Other shapes and unseen depths are inferred.
Built from 7 printed dimensions, 30 scaled from the figure.Details
Reference reconstruction traced from manufacturer views and constrained by printed dimensions. Undimensioned shapes and depths are inferred and labelled; omitted features mean this is not a guaranteed clearance boundary. NOT a manufacturing model or manufacturer CAD. Jaws and internal parts are not modelled. Verify fit and clearance against current manufacturer data and the physical tool.
- 3/8 [9,4] Nose fitting thread's back end to the head's front face · Cherry TM-G704B tool manual (Rev C, 2016), p.3, p.3 outline drawing (side view)
- 3-1/2 [89,1] Head's front face to the back cap's back face · Cherry TM-G704B tool manual (Rev C, 2016), p.3, p.3 outline drawing (side view)
- 3-1/2 [88,9] Back cap to the pin deflector's back end · Cherry TM-G704B tool manual (Rev C, 2016), p.3, p.3 outline drawing (side view)
- .78 [19,8] Head axis to the top of the head · Cherry TM-G704B tool manual (Rev C, 2016), p.3, p.3 outline drawing (side view)
- 11 [284] Tool height (head top to base cover bottom) · Cherry TM-G704B tool manual (Rev C, 2016), p.3, p.3 outline drawing (side view)
- 2.13 [54] Handle depth at its narrowest · Cherry TM-G704B tool manual (Rev C, 2016), p.3, p.3 outline drawing (side view)
- 4-29/32 [124,6] Base across (power cylinder housing to valve housing face) · Cherry TM-G704B tool manual (Rev C, 2016), p.3, p.3 outline drawing (side view)
Scaled from the catalog figure, not dimensioned
- Nose fitting thread: crest spacing (as drawn; not a thread specification): 0.07 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Nose fitting: largest diameter: 0.48 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Head cylinder: largest diameter: 1.56 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Head cylinder lower lug: side outline (length): 0.38 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Head cylinder lower lug: width: 1.14 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Back cap: largest diameter: 1.41 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Deflect fitting: largest diameter: 0.91 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Pin deflector: side outline (length): 2.53 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Pin deflector: width: 0.90 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Button head screw: diameter: 0.45 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Head base: side outline (length): 2.47 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Head base: width: 1.56 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Handle top flange: side outline (length): 2.42 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Handle top flange: width: 2.40 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Handle: side outline (length): 3.71 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Handle: width: 2.13 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Trigger sleeve: largest diameter: 0.64 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Trigger: largest diameter: 0.55 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Handle base housing: largest diameter: 3.98 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Handle base: largest diameter: 4.06 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Base cover: largest diameter: 4.15 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Valve housing: side outline (length): 1.48 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Valve housing: width: 0.95 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Muffler: side outline (length): 0.55 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Muffler: width: 0.95 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Base cover tail: side outline (length): 1.68 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Base cover tail: width: 0.95 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Air inlet fitting nut: across flats: 0.71 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Air inlet fitting body: largest diameter: 0.93 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Air inlet fitting end hex: across flats: 0.79 in (scaled from Cherry TM-G704B tool manual (Rev C, 2016) p.3, p.3 outline drawing, side view, not dimensioned)
- Traced from the TM-G704B (Rev C) outline drawing, side view only. The head, its nose fitting, back cap and deflect fitting are round about the head's axis; the base (the handle's power cylinder housing, the handle base and the base cover) is round about its vertical axis, as the cover photo and the exploded view (p.13) show it. Widths of the flat parts (handle, flange, pin deflector, valve housing) follow the rules listed with each value.
- The drawing's mm for 11 (284) is 11.18 in. and matches the drawing's scale better than the inch value; the model follows the inch value as printed.
- The source draws no front or end view: widths across are scaled by the rules listed with the values.
Not modelled
Everything it installs1 fastener group
Fastener process documents that name it4
- CherryMAX -4, -5, -6 Cherry CA-1015 p.19 ↗
- Cherry Maxibolt -4, -5 Cherry CA-1039 p.23 ↗
- Cherry SST -4, -5, -6 Cherry CA-1037 p.11 ↗
- Cherry 1900 bulbing blind rivet -4, -5 Cherry CA-1035 p.2 ↗
Other brands' equivalents1 statement
- Gage Bilt says GB704 replaces G704B (Cherry) Gage Bilt 2017 p.153 ↗
Gage Bilt's cross-reference lists GB704 (installation tool) for G704B.
Sources6
- Cherry Fastening Systems for Aerospace Tool Catalog (©2015 edition, archived), p.26, CherryMAX® Blind Rivets & Tools, Cherry Power Tools ↗
- Inconel part: "NOTE: G704B/G83A/G84 power riveters recommended for installation of Inconel fasteners due to high break stem loads" (©2015 guide p.26). The G747 and G800 the same table lists are left off for Inconel.
- Cherry CA-1015 (CherryMAX process manual), p.19, CherryMAX Tooling ↗
- The split riveters (-SR, -40SH) separate a small hand held unit from the floor unit (CA-1015 p.19, p.20).
- Cherry CA-1039 (MAXIBOLT process manual), p.23, Installation Tool Selection Chart ↗
- Cherry CA-1037 (Cherry SST), p.11, Installation Tooling, Tool Selection Chart ↗
- Cherry CA-1035 (Cherry 1900), p.2, Tooling ↗
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.153, Other - Gage Bilt Cross Reference, page 48 ↗
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Published dimensions22 · for envelope CAD
| Feature | Value | As printed | Source |
|---|---|---|---|
| Air pressure | 90-110 psi | 90 psi (6,2 bar) min./110 psi (7,6 bar) max. | Cherry CA-1001 Tool Catalog (2017), p.4, G704B Specifications ↗ |
| Stroke | 0.51 in | 0.510 Inch (12,954 mm) | Cherry CA-1001 Tool Catalog (2017), p.4, G704B Specifications ↗ |
| Pull force | 3100 lbf | 3100 lbs (13,79 kN) @ 90 psi (6,2 bar) | Cherry CA-1001 Tool Catalog (2017), p.4, G704B Specifications ↗ |
| Weight | 4.25 lb | 4 1/4 lbs (1,93 kg) | Cherry CA-1001 Tool Catalog (2017), p.4, G704B Specifications ↗ |
| Air consumption | 0.16 scf/cycle | 0.16 SCF/cycle (4,53 L/cycle) | Cherry CA-1001 Tool Catalog (2017), p.4, G704B Specifications ↗ |
| As drawn (feature not labeled) | 0.375 in | 3/8 [9,4] Side view: the nose fitting thread's back end to the head's front face. As printed; 3/8 in. is 9.5 mm, the drawing's mm value differs. | Cherry TM-G704B tool manual (Rev C, 2016), p.3, p.3 outline drawing (side view) ↗ |
| As drawn (feature not labeled) | 3.5 in | 3-1/2 [89,1] Side view: the head's front face to the back cap's back face. As printed; 3.5 in. is 88.9 mm, the drawing's mm value differs. | Cherry TM-G704B tool manual (Rev C, 2016), p.3, p.3 outline drawing (side view) ↗ |
| As drawn (feature not labeled) | 3.5 in | 3-1/2 [88,9] Side view: the head's back cap to the pin deflector's back end. | Cherry TM-G704B tool manual (Rev C, 2016), p.3, p.3 outline drawing (side view) ↗ |
| As drawn (feature not labeled) | 0.78 in | .78 [19,8] Side view: the head's axis to the top of the head. | Cherry TM-G704B tool manual (Rev C, 2016), p.3, p.3 outline drawing (side view) ↗ |
| Tool height | 11 in | 11 [284] Side view: the top of the head to the base cover's bottom. As printed; 11 in. is 279.4 mm, the drawing's mm value differs. | Cherry TM-G704B tool manual (Rev C, 2016), p.3, p.3 outline drawing (side view) ↗ |
| As drawn (feature not labeled) | 2.13 in | 2.13 [54] Side view: the handle's depth (front to back) at its narrowest. | Cherry TM-G704B tool manual (Rev C, 2016), p.3, p.3 outline drawing (side view) ↗ |
| As drawn (feature not labeled) | 4.90625 in | 4-29/32 [124,6] Side view: across the base, the power cylinder housing's back to the valve housing's face. | Cherry TM-G704B tool manual (Rev C, 2016), p.3, p.3 outline drawing (side view) ↗ |
As printed in the fastener process documents
- G704B-SR, as dimensioned: 10 1/4" (261,63 mm) tall; 5 3/16" (131,76 mm) base (CherryMAX, Cherry CA-1015 (CherryMAX process manual), p.19, CherryMAX Tooling ↗)
- G704B-40SH, as dimensioned: 11" (279,40 mm) tall; 6 3/16" (157,16 mm) base; hand held unit 8" (203,2 mm) by 7" (177,8 mm) (CherryMAX, Cherry CA-1015 (CherryMAX process manual), p.19, CherryMAX Tooling ↗)
- Air pressure: 90-110 psi (6,2-7,6 bar) (CherryMAX, Cherry CA-1015 (CherryMAX process manual), p.19, CherryMAX Tooling ↗)
- Stroke: 0.5 inch (12,7 mm) (CherryMAX, Cherry CA-1015 (CherryMAX process manual), p.19, CherryMAX Tooling ↗)
- Pulling force: 3100 lbs. @ 90 PSI (13,79 kN @ 6,2 bar) (CherryMAX, Cherry CA-1015 (CherryMAX process manual), p.19, CherryMAX Tooling ↗)
- Weight: G704B 4.25 lbs. (1,95 kg); G704B-SR hand held unit <2.0 lbs. (0,9 kg); G704B-40SH hand held unit 2.5 lbs. (1,13 kg) (CherryMAX, Cherry CA-1015 (CherryMAX process manual), p.19, CherryMAX Tooling ↗)
- Height, inches: 11.0 (Cherry Maxibolt, Cherry CA-1039 (MAXIBOLT process manual), p.23, Installation Tool Selection Chart ↗)
- Base dia., inches: 4.9 (Cherry Maxibolt, Cherry CA-1039 (MAXIBOLT process manual), p.23, Installation Tool Selection Chart ↗)
- Pulling capacity: 3136 (Cherry Maxibolt, Cherry CA-1039 (MAXIBOLT process manual), p.23, Installation Tool Selection Chart ↗)
- Weight, lbs.: 4.5 (Cherry Maxibolt, Cherry CA-1039 (MAXIBOLT process manual), p.23, Installation Tool Selection Chart ↗)
Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.