← Tooling compatibility finder

G747

G747 Lightweight CherryMAX® Riveter · Installation tool · Cherry

G747 installs CherryMAX® blind rivet -4, -5, -6 with nose H701B-456, H747-456, H753A-456, H781A-456 or H782.

Loading 3D view...
Traced reference model. Not for machining or verified fit.

Traced from 0 manufacturer views, with published dimensions held fixed. Other shapes and unseen depths are inferred.

Built from 3 printed dimensions, 23 scaled from the figure.Details

Reference reconstruction traced from manufacturer views and constrained by printed dimensions. Undimensioned shapes and depths are inferred and labelled; omitted features mean this is not a guaranteed clearance boundary. NOT a manufacturing model or manufacturer CAD. Jaws and internal parts are not modelled. Verify fit and clearance against current manufacturer data and the physical tool.

Scaled from the catalog figure, not dimensioned

  • Nose thread: crest spacing (as drawn; not a thread specification): 0.06 in (scaled from Cherry TM-G747 tool manual (2007) p.3, p.2 dimensioned photo, side view, not dimensioned)
  • Nose hex: across flats: 0.40 in (scaled from Cherry TM-G747 tool manual (2007) p.3, p.2 dimensioned photo, side view, not dimensioned)
  • Head cylinder front: largest diameter: 1.18 in (scaled from Cherry TM-G747 tool manual (2007) p.3, p.2 dimensioned photo, side view, not dimensioned)
  • Head cylinder: largest diameter: 1.28 in (scaled from Cherry TM-G747 tool manual (2007) p.3, p.2 dimensioned photo, side view, not dimensioned)
  • Cap, head cylinder: largest diameter: 1.32 in (scaled from Cherry TM-G747 tool manual (2007) p.3, p.2 dimensioned photo, side view, not dimensioned)
  • Fitting, deflector: largest diameter: 0.78 in (scaled from Cherry TM-G747 tool manual (2007) p.3, p.2 dimensioned photo, side view, not dimensioned)
  • Deflector, pin: side outline (length): 3.02 in (scaled from Cherry TM-G747 tool manual (2007) p.3, p.2 dimensioned photo, side view, not dimensioned)
  • Deflector, pin: width: 0.80 in (scaled from Cherry TM-G747 tool manual (2007) p.3, p.2 dimensioned photo, side view, not dimensioned)
  • Screw, button head cap: diameter: 0.44 in (scaled from Cherry TM-G747 tool manual (2007) p.3, p.2 dimensioned photo, side view, not dimensioned)
  • Head cylinder foot: side outline (length): 2.31 in (scaled from Cherry TM-G747 tool manual (2007) p.3, p.2 dimensioned photo, side view, not dimensioned)
  • Head cylinder foot: width: 1.28 in (scaled from Cherry TM-G747 tool manual (2007) p.3, p.2 dimensioned photo, side view, not dimensioned)
  • Handle top flange: side outline (length): 2.29 in (scaled from Cherry TM-G747 tool manual (2007) p.3, p.2 dimensioned photo, side view, not dimensioned)
  • Handle top flange: width: 2.30 in (scaled from Cherry TM-G747 tool manual (2007) p.3, p.2 dimensioned photo, side view, not dimensioned)
  • Handle: side outline (length): 3.43 in (scaled from Cherry TM-G747 tool manual (2007) p.3, p.2 dimensioned photo, side view, not dimensioned)
  • Handle: width: 1.84 in (scaled from Cherry TM-G747 tool manual (2007) p.3, p.2 dimensioned photo, side view, not dimensioned)
  • Sub assembly, trigger: largest diameter: 0.59 in (scaled from Cherry TM-G747 tool manual (2007) p.3, p.2 dimensioned photo, side view, not dimensioned)
  • Handle: largest diameter: 3.15 in (scaled from Cherry TM-G747 tool manual (2007) p.3, p.2 dimensioned photo, side view, not dimensioned)
  • Base, handle: largest diameter: 3.49 in (scaled from Cherry TM-G747 tool manual (2007) p.3, p.2 dimensioned photo, side view, not dimensioned)
  • Cover, urethane base: largest diameter: 3.82 in (scaled from Cherry TM-G747 tool manual (2007) p.3, p.2 dimensioned photo, side view, not dimensioned)
  • Cover, urethane base: side outline (length): 1.26 in (scaled from Cherry TM-G747 tool manual (2007) p.3, p.2 dimensioned photo, side view, not dimensioned)
  • Cover, urethane base: width: 0.57 in (scaled from Cherry TM-G747 tool manual (2007) p.3, p.2 dimensioned photo, side view, not dimensioned)
  • Handle: side outline (length): 1.07 in (scaled from Cherry TM-G747 tool manual (2007) p.3, p.2 dimensioned photo, side view, not dimensioned)
  • Handle: width: 0.57 in (scaled from Cherry TM-G747 tool manual (2007) p.3, p.2 dimensioned photo, side view, not dimensioned)
  • Traced from the TM-G747 manual's dimensioned product photo (side view). The catalog's values (CA-1001 p.5: 11 3/8, 4.56, 2, 23/32) stay on the tool page; the manual's photo values are added as their own dimensions.
  • The photo's .719 and 2 do not match the photo's own scale (the head is drawn 0.65 in. from its axis to its top, the handle 1.84 in. deep); the model keeps the photo's shapes and lists both as not used.
  • The head, its cap and the deflector fitting are round about the head's axis (tilted the printed 10 deg); the base is round about its vertical axis; the flat parts take widths by the rules listed with each value.
  • The p.2 dimensioned photo, side view is read for sizes but not silhouette-checked: it is a product photo taken from a little above the side (the base cover's top face, the base's lower rim and the head cap's lower rim show as ellipses, and its edges are soft); against the photo's silhouette, outside the white labels and the hose fitting, the model scores IoU 0.975, p95 5.8 px, max 10 px (docs/cad-verify/tool-overlays/figs-cherry-riveters.json keeps the view's settings; the regions below were excluded for that reading).
  • The source draws no front or end view: widths across are scaled by the rules listed with the values.

Not modelled

    Everything it installs1 fastener group

    CherryMAX® blind rivet (NAS9301 to NAS9312 / CR3213 to CR3555P) -4, -5, -6, per the Cherry catalog

    Fastener process documents that name it3
    Other brands' equivalents1 statement
    Sources5
    Published dimensions21 · for envelope CAD
    FeatureValueAs printedSource
    Air pressure90-110 psi90 psi (6,2 bar) min./110 psi (7,6 bar) max.Cherry CA-1001 Tool Catalog (2017), p.5, G747 Specifications ↗
    Stroke0.437 in0.437 inch (11,1 mm)Cherry CA-1001 Tool Catalog (2017), p.5, G747 Specifications ↗
    Pull force2100 lbf2100 lbs (9,34 kN) @ 90 psi (6,2 bar)Cherry CA-1001 Tool Catalog (2017), p.5, G747 Specifications ↗
    Weight3.5 lb3.5 lbs (1,59 kg)Cherry CA-1001 Tool Catalog (2017), p.5, G747 Specifications ↗
    Tool height11.375 in11 3/8" (288,8 mm)Cherry CA-1001 Tool Catalog (2017), p.5, G747 drawing ↗
    Base diameter4.56 in4.56" (115,8 mm)Cherry CA-1001 Tool Catalog (2017), p.5, G747 drawing ↗
    As drawn (feature not labeled)2 in2" (50,8 mm)

    Head dimension as drawn.

    Cherry CA-1001 Tool Catalog (2017), p.5, G747 drawing ↗
    As drawn (feature not labeled)0.71875 in23/32" (18,3 mm)

    Head dimension as drawn.

    Cherry CA-1001 Tool Catalog (2017), p.5, G747 drawing ↗
    Tool height11.37 in11.37" (288.8 mm)

    Photo: the head's top to the base cover's lowest point.

    Cherry TM-G747 tool manual (2007), p.3, p.2 dimensioned photo ↗
    As drawn (feature not labeled)4.56 in4.56" (115.8 mm)

    Photo: the base cover's length front to back (the cover is obround: exploded view p.10).

    Cherry TM-G747 tool manual (2007), p.3, p.2 dimensioned photo ↗
    Angle10 deg10°

    Photo: the head's axis below the horizontal toward the back.

    Cherry TM-G747 tool manual (2007), p.3, p.2 dimensioned photo ↗
    As drawn (feature not labeled)0.719 in.719" (18.3 mm)

    Photo: the head's axis to its top, measured square to the axis. The two lines are drawn 32.5 px apart, 0.65 in. at the photo's scale (50 px per inch from the 11.37 and the 4.56); not used in the model, which keeps the photo's head.

    Cherry TM-G747 tool manual (2007), p.3, p.2 dimensioned photo ↗
    As drawn (feature not labeled)2 in2" (50.8 mm)

    Photo: the handle's depth at its narrowest. The arrows stop short of the handle, which the photo draws 93 px (1.84 in.) deep there; not used in the model, which keeps the photo's handle.

    Cherry TM-G747 tool manual (2007), p.3, p.2 dimensioned photo ↗

    Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.

    Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers

    Next step

    Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

    Find tooling for a part number →Tooling shop →