← Tooling compatibility finder

99-2562

99-2562 nose assembly · Nose / pulling head · Huck · Standard

99-2562 installs NAS shear pull-type lockbolt -8 on a Model 2480.

Catalog noteDetails
Figure 1; 1 flat (Nose Assembly Specifications).
Loading 3D view...
Traced reference model. Not for machining or verified fit.

Traced from 1 manufacturer view, with published dimensions held fixed. Other shapes and unseen depths are inferred.

Built from 4 printed dimensions, 7 scaled from the figure.Details

Reference reconstruction traced from manufacturer views and constrained by printed dimensions. Undimensioned shapes and depths are inferred and labelled; omitted features mean this is not a guaranteed clearance boundary. NOT a manufacturing model or manufacturer CAD. Jaws and internal parts are not modelled. Verify fit and clearance against current manufacturer data and the physical tool.

Scaled from the catalog figure, not dimensioned

  • Mounting flange diameter: 1.00 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 1, not dimensioned)
  • Mounting flange length as drawn (the figure breaks off its back): 0.44 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 1, not dimensioned)
  • Tip face diameter: 0.32 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 1, not dimensioned)
  • Tip chamfer / collar length: 0.18 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 1, not dimensioned)
  • Mounting flange: hidden bore (dashed outline): 0.75 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 1, not dimensioned)
  • Tip bore 1 (outer circle of the end view): diameter: 0.27 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 1 end view, not dimensioned)
  • Tip bore 2 (inner circle of the end view): diameter: 0.18 in (scaled from Huck Aerospace Installation Equipment catalog (Jan 2010, archived) p.50, Figure 1 end view, not dimensioned)
  • The flat is drawn on top (+y); the catalog does not fix its orientation about the axis.

Not modelled

  • Jaws and internals; the mounting flange's back (the drawing breaks off there) and its internal thread (dashed).
Everything it installs1 fastener group

NAS shear pull-type lockbolt (pin and collar) -8, per the Huck catalog

Other brands' equivalents1 statement
Sources2
  1. Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.47, Model 2480/A2480, Standard Inline & Offset Nose Assemblies ↗
    • Model 2480/A2480, Standard Inline & Offset Nose Assemblies.
  2. Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.146, Other - Gage Bilt Cross Reference, page 41 ↗

Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.

Published dimensions4 · for envelope CAD
FeatureValueAs printedSource
Length from tool face(A, Figure 1 (p.51))4.35 in4.35

1/4" table

Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 1/4" table ↗
Nose diameter(B, Figure 1 (p.51))0.76 in.76

1/4" table

Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 1/4" table ↗
Centerline to edge(C, Figure 1 (p.51))0.34 in.34

Drawn from the centreline to the flat. The flat runs length D back from the tip; everywhere else the nose is diameter B. 1/4" table

Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 1/4" table ↗
Flat length(D, Figure 1 (p.51))3.75 in3.75

1/4" table

Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 1/4" table ↗

Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.

On the floor:Low clearance puller finder

Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers

Next step

Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

Find tooling for a part number →Tooling shop →