Which tool installs this fastener?
Enter a fastener part number for the exact nose or pulling head at its diameter, the tools that take it and any adapters, from each tool maker's catalog. Or enter a tool, nose or adapter PN to see what it installs across brands. Cross-brand fits are shown only where a catalog states them; everything else reads "not documented".
Try CR3213-6-02 · HC3213-6-02 · AF3213-6-02 · NAS1446-10 · MBF2110-6-300 · HL10-6-8 · H701B-456 · G83A
What G83A installs
Everything it installs2 fastener groups
CherryMAX® blind rivet (NAS9301 to NAS9312 / CR3213 to CR3555P) -4, -5, -6, -8, per the Cherry catalog
- H701B-456H747-456H753A-456H781A-456H782(-4, -5, -6)onG83AG84+ adapter744-300Cherry CA-1001 p.22 ↗
- H84A-8H829-56MBPS(-8)onG83AG84Cherry 2015 catalog p.26 ↗
- H828-8H827-8(-8)onG83AG84+ adapter744-200Cherry 2015 catalog p.26 ↗
Pull type lockbolt (NAS1446-1452 to NAS6946-6952) -4, -5, -6, per the Cherry catalog
Fastener process documents that name it1
- CherryMAX -4, -5, -6 Cherry CA-1015 p.5 ↗
Other brands' equivalents2 statements
- Cherry says G83A fits Huck 230, 362 (bayonet mount) (Huck) Cherry CA-1001 p.7 ↗
G83A bayonet mounting system, "common for G83A and G84 (compatible to Huck 230, 362 models."
- Gage Bilt says GB730 replaces G83A (Cherry) Gage Bilt 2017 p.154 ↗
Gage Bilt's cross-reference lists GB730 (installation tool) for G83A.
Sources6
- Cherry CA-1001 Tool Catalog (2017), p.22, Riveter Adapters ↗
- 744-300: G83A, G84 to the G704B (CherryMAX®) mounting system "for H701B, H747, H781A, H782, H753A"; "Must remove the bayonet adapter".
- Cherry Fastening Systems for Aerospace Tool Catalog (©2015 edition, archived), p.26, CherryMAX® Blind Rivets & Tools, Cherry Power Tools ↗
- "* Use adapter 744-200".
- As printed on the ©2015 guide. The 2017 catalog (CA-1001 p.8) lists H829-56MBPS for MAXIBOLT PLUS® -5, -6 and H829-8 for CherryMAX® right angle; confirm with Cherry.
- Cherry Fastening Systems for Aerospace Tool Catalog (©2015 edition, archived), p.32, Pull Type Lockbolts & Tools, Cherry Power Tools ↗
- "* Refer to H513 pulling head chart for alternate part numbers."
- Cherry CA-1015 (CherryMAX process manual), p.5, CherryMAX Tool Selection ↗
- Cherry CA-1001 Tool Catalog (2017), p.7, G83A Description ↗
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.154, Other - Gage Bilt Cross Reference, page 49 ↗
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Published dimensions5
| Feature | Value | As printed | Source |
|---|---|---|---|
| Air pressure | 90-110 psi | 90 psi (6,2 bar) min./110 psi (7,6 bar) max. | Cherry CA-1001 Tool Catalog (2017), p.7, G83A Specifications ↗ |
| Stroke | 0.437 in | 0.437 inch (11,1 mm) | Cherry CA-1001 Tool Catalog (2017), p.7, G83A Specifications ↗ |
| Pull force | 3750 lbf | 3,750 lbs. (16,7 kN) @ 90 psi (6,2 bar) | Cherry CA-1001 Tool Catalog (2017), p.7, G83A Specifications ↗ |
| Return force | 800 lbf | 800 lbs. (3,56 kN) on return stroke | Cherry CA-1001 Tool Catalog (2017), p.7, G83A Specifications ↗ |
| Weight | 4.95 lb | 4.95 lbs. (2,25 kg) | Cherry CA-1001 Tool Catalog (2017), p.7, G83A Specifications ↗ |
Compatibility matrixNose by fastener, brand and diameter
Each cell lists the noses the brand's own catalog names for that fastener and diameter. "Not documented" means no catalog on file names one, not that none exists. Gage Bilt states its tools and noses are interchangeable with Huck, Cherry and Allfast; its cross-reference (on each tool page) gives its PN for each Huck or Cherry PN. Allfast tooling is a gap until an Allfast tool catalog is on file. A NAS93xx blind rivet's tooling follows its maker: the Cherry cells are for Cherry-made parts, the Huck cells for Huck-made (HuckMAX™, HUCK-CLINCH®). NAS lockbolt cells name the standard itself.
Next · 3 Quote
Buy the tooling with the fasteners
Add set to quote puts the nose, the tool and any adapters on the one quote, each with its catalog citation.