← Tooling compatibility finder

99-2561

99-2561 nose assembly · Nose / pulling head · Huck · Standard

99-2561 installs NAS shear pull-type lockbolt -8 on a Model 2480.

Catalog noteDetails
Listed in the 1/8" table (Figure 1, 2 flats) and the 1/4" table (Figure 1, 1 flat) with different values; Model 2480 lists it for 1/4" (p.47).

3D model not available: not enough printed dimensions: the catalog prints two different dimension sets for this nose (1/8" and 1/4" tables). 3D library

Everything it installs1 fastener group

NAS shear pull-type lockbolt (pin and collar) -8, per the Huck catalog

Other brands' equivalents1 statement
Sources2
  1. Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.47, Model 2480/A2480, Standard Inline & Offset Nose Assemblies ↗
    • Model 2480/A2480, Standard Inline & Offset Nose Assemblies.
  2. Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.146, Other - Gage Bilt Cross Reference, page 41 ↗

Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.

Published dimensions8 · for envelope CAD
FeatureValueAs printedSource
Length from tool face(A, Figure 1 (p.51))1.94 in1.94

1/8" table

Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 1/8" table ↗
Nose diameter(B, Figure 1 (p.51))0.75 in.75

1/8" table

Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 1/8" table ↗
Centerline to edge(C, Figure 1 (p.51))0.33 in.33

Drawn from the centreline to the flat. The flat runs length D back from the tip; everywhere else the nose is diameter B. 1/8" table

Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 1/8" table ↗
Flat length(D, Figure 1 (p.51))1.25 in1.25

1/8" table

Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 1/8" table ↗
Length from tool face(A, Figure 1 (p.51))1.85 in1.85

1/4" table

Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 1/4" table ↗
Nose diameter(B, Figure 1 (p.51))0.76 in.76

1/4" table

Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 1/4" table ↗
Centerline to edge(C, Figure 1 (p.51))0.34 in.34

Drawn from the centreline to the flat. The flat runs length D back from the tip; everywhere else the nose is diameter B. 1/4" table

Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 1/4" table ↗
Flat length(D, Figure 1 (p.51))1.2 in1.20

1/4" table

Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 1/4" table ↗

Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.

On the floor:Low clearance puller finder

Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers

Next step

Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

Find tooling for a part number →Tooling shop →