← Tooling compatibility finder
99-2556
99-2556 nose assembly · Nose / pulling head · Huck · Standard
99-2556 installs NAS shear pull-type lockbolt -6 on a 244 or 2480.
Catalog noteDetails
Everything it installs1 fastener group
NAS shear pull-type lockbolt (pin and collar) -6, per the Huck catalog
Other brands' equivalents1 statement
- Gage Bilt says NAS06-2480-45 replaces 99-2556 (Huck) Gage Bilt 2017 p.146 ↗
Gage Bilt's cross-reference lists NAS06-2480-45 (nose assembly) for 99-2556.
Sources3
- Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.46, Model 244, Standard Inline & Offset Nose Assemblies ↗
- Model 244, Standard Inline & Offset Nose Assemblies.
- Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.47, Model 2480/A2480, Standard Inline & Offset Nose Assemblies ↗
- Model 2480/A2480, Standard Inline & Offset Nose Assemblies.
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.146, Other - Gage Bilt Cross Reference, page 41 ↗
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Published dimensions5 · for envelope CAD
| Feature | Value | As printed | Source |
|---|---|---|---|
| Reduced section length(A, Figure 2 (p.51)) | 3.75 in | 3.75 3/16" table | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 3/16" table ↗ |
| Nose diameter(B, Figure 2 (p.51)) | 0.71 in | 0.71 3/16" table | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 3/16" table ↗ |
| Centerline to edge(C, Figure 2 (p.51)) | 0.32 in | 0.32 3/16" table | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 3/16" table ↗ |
| Flat length(D, Figure 2 (p.51)) | 3.7 in | 3.7 3/16" table | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 3/16" table ↗ |
| Length from tool face(E, Figure 2 (p.51)) | 4.35 in | 4.35 3/16" table | Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.50, Nose Assembly Specifications, 3/16" table ↗ |
Only dimensions a document prints are listed, with the feature each one measures. None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.
Next · 3 Quote
Put the tool on the quote
Add to quote puts this PN on the one quote with its citation. Tooling needs no lot traceability.