← Tooling compatibility finder
456MAX-704-40OS
456MAX-704-40OS (nose assembly - offset) · Nose / pulling head · Gage Bilt · Offset
No fastener installation table on file names this part number.
Catalog noteDetails
Other brands' equivalents2 statements
- Gage Bilt says 456MAX-704-40OS replaces 99-1336 (Huck) Gage Bilt 2017 p.142 ↗
Gage Bilt's cross-reference lists 456MAX-704-40OS (nose assembly - offset) for 99-1336.
- Gage Bilt says 456MAX-704-40OS replaces H782 (Cherry) Gage Bilt 2017 p.156 ↗
Gage Bilt's cross-reference lists 456MAX-704-40OS (nose assembly - offset) for H782.
Sources2
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.142, Other - Gage Bilt Cross Reference, page 37 ↗
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.156, Other - Gage Bilt Cross Reference, page 51 ↗
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Published dimensions1 · for envelope CAD
| Feature | Value | As printed | Source |
|---|---|---|---|
| Length from tool face | 4 in | 456MAX-704-40OS ("-40" = 4.0 in. per the PN rule) "The last 2 digits of the nose assembly represents the length the nose extends from the tool i.e. -20 = 2.0 inches" (GB704 chart, PDF p.41). | Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.142, Other - Gage Bilt Cross Reference, page 37 ↗ |
Only dimensions a document prints are listed, with the feature each one measures. None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.
Next · 3 Quote
Put the tool on the quote
Add to quote puts this PN on the one quote with its citation. Tooling needs no lot traceability.