← Tooling compatibility finder

GB784

GB784 (installation tool) · Installation tool · Gage Bilt

No fastener installation table on file names this part number.

Catalog noteDetails
Named only in Gage Bilt's cross-reference, as its PN for G784.
Loading 3D view...
Traced reference model. Not for machining or verified fit.

Traced from 2 manufacturer views, with published dimensions held fixed. Other shapes and unseen depths are inferred.

Built from 10 printed dimensions, 21 scaled from the figure.Details

Reference reconstruction traced from manufacturer views and constrained by printed dimensions. Undimensioned shapes and depths are inferred and labelled; omitted features mean this is not a guaranteed clearance boundary. NOT a manufacturing model or manufacturer CAD. Jaws and internal parts are not modelled. Verify fit and clearance against current manufacturer data and the physical tool.

Scaled from the catalog figure, not dimensioned

  • Nose sleeve: largest diameter: 1.13 in (scaled from Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29) p.1, GB784 side view, not dimensioned)
  • Head cylinder front ring: largest diameter: 1.54 in (scaled from Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29) p.1, GB784 side view, not dimensioned)
  • Head cylinder: side outline (length): 4.73 in (scaled from Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29) p.1, GB784 side view, not dimensioned)
  • Head cylinder: end view outline (widest): 1.83 in (scaled from Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29) p.1, GB784 front view, not dimensioned)
  • End cap: largest diameter: 1.54 in (scaled from Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29) p.1, GB784 side view, not dimensioned)
  • Rear plug: largest diameter: 0.18 in (scaled from Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29) p.1, GB784 side view, not dimensioned)
  • Handle top: side outline (length): 3.20 in (scaled from Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29) p.1, GB784 side view, not dimensioned)
  • Grip and shoulder: side outline (length): 4.72 in (scaled from Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29) p.1, GB784 side view, not dimensioned)
  • Grip and shoulder: end view outline (widest): 4.65 in (scaled from Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29) p.1, GB784 front view, not dimensioned)
  • Grip and shoulder: top view outline (widest): 4.64 in (scaled from Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29) p.1, top view, not dimensioned)
  • Base: largest diameter: 4.64 in (scaled from Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29) p.1, GB784 side view, not dimensioned)
  • Air valve housing: side outline (length): 2.26 in (scaled from Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29) p.1, GB784 side view, not dimensioned)
  • Air valve housing: width: 4.56 in (scaled from Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29) p.1, GB784 front view, not dimensioned)
  • Air inlet swivel: side outline (length): 1.12 in (scaled from Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29) p.1, GB784 side view, not dimensioned)
  • Air inlet swivel: width: 0.78 in (scaled from Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29) p.1, GB784 side view, not dimensioned)
  • Base cover: largest diameter: 4.88 in (scaled from Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29) p.1, GB784 side view, not dimensioned)
  • Actuator lever: side outline (length): 0.30 in (scaled from Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29) p.1, GB784 side view, not dimensioned)
  • Actuator lever: width: 0.51 in (scaled from Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29) p.1, GB784 front view, not dimensioned)
  • Actuator assembly-air: across flats: 0.66 in (scaled from Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29) p.1, GB784 side view, not dimensioned)
  • Stop plate: side outline (length): 0.65 in (scaled from Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29) p.1, GB784 side view, not dimensioned)
  • Stop plate: width: 0.89 in (scaled from Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29) p.1, GB784 front view, not dimensioned)
  • Built from the Gage Bilt GB784 flyer's front and side views (page 1, the GB784 render; the GB784SH and GB784SR split-handle variants on the same page are not modelled). The flyer's embedded image is transparent where the page is white, so the page is rendered at 424 dpi (the image's own resolution) and the figure read from that. Part names follow the GB784 manual: head cylinder (784221), handle assembly (744129), base cover (744124), actuator lever assembly (704343), actuator assembly-air (704130), swivel (A-249, the air inlet); the knurled nose sleeve and the rings at the head's ends are named as drawn.
  • Front of the tool to the left (-x): x = 0 at the nose sleeve's front, y = 0 on the floor; the head is drawn level (no tilt). No base depth is printed on this flyer: the base is placed by the head's and grip's printed lengths and sized by the Ø4.88.
  • The front view's 1.87 runs to a knob on the head's right side that only the front view draws; it is kept with the tool's dimensions but not used. The air inlet swivel shows in the side view only and is placed on the tool's centre plane.

Not modelled

    Other brands' equivalents1 statement
    Sources1
    1. Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.153, Other - Gage Bilt Cross Reference, page 48 ↗

    Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.

    Published dimensions11 · for envelope CAD
    FeatureValueAs printedSource
    Tool length6.33 in6.33 (160.7 mm)

    Head length: the nose sleeve's front to the end cap's back (side view; the head is level).

    Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29), p.1, GB784 front and side views ↗
    As drawn (feature not labeled)1 in1.00 (25.4 mm)

    Length of the knurled nose sleeve at the head's front (side view).

    Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29), p.1, GB784 front and side views ↗
    Body diameter1.63 inØ1.63 (41.3 mm)

    Head cylinder, top to bottom (side view).

    Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29), p.1, GB784 front and side views ↗
    As drawn (feature not labeled)1.13 inØ1.13 (28.7 mm)

    Knurled nose sleeve diameter (side view).

    Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29), p.1, GB784 front and side views ↗
    Tool height11.87 in11.87 (301.6 mm)

    Floor to the head cylinder's top.

    Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29), p.1, GB784 front and side views ↗
    As drawn (feature not labeled)4.77 in4.77 (121.3 mm)

    Floor to the top of the base's side, where the sloping shoulder begins (side view).

    Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29), p.1, GB784 front and side views ↗
    As drawn (feature not labeled)2.05 in2.05 (51.9 mm)

    Grip depth (side view). As printed; 2.05 in. is 52.1 mm, the drawing's mm value differs.

    Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29), p.1, GB784 front and side views ↗
    As drawn (feature not labeled)1.4 in1.40 (35.6 mm)

    Grip width (front view).

    Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29), p.1, GB784 front and side views ↗
    As drawn (feature not labeled)1.81 in1.810 (45.9 mm)

    Width of the handle top under the head (front view).

    Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29), p.1, GB784 front and side views ↗
    As drawn (feature not labeled)1.87 in1.87 (47.4 mm)

    Front view, across the head from its left side to the knob on its right side. Recorded, not used by the model: the knob is drawn in the front view only and is not modelled.

    Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29), p.1, GB784 front and side views ↗
    Base diameter4.88 inØ4.88 (124 mm)

    Base cover diameter (front view).

    Gage Bilt GB784 flyer (no revision printed; PDF created 2025-09-29), p.1, GB784 front and side views ↗

    Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.

    Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers

    Next step

    Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

    Find tooling for a part number →Tooling shop →