← Tooling guide

Which tool installs this fastener?

Enter a fastener part number for the exact nose or pulling head at its diameter, the tools that take it and any adapters, from each tool maker's catalog. Or enter a tool, nose or adapter PN to see what it installs across brands. Cross-brand fits are shown only where a catalog states them; everything else reads "not documented".

Try CR3213-6-02 · HC3213-6-02 · AF3213-6-02 · NAS1446-10 · MBF2110-6-300 · HL10-6-8 · H701B-456 · G83A

Tooling for CR3524-4-09

CR3524-4-09 (CherryMAX, 1/8") installs with nose H701B-456 on a G704B, G747 or G800 riveter.

CherryMAX tool tables

Other tools that work3 more setups · 19 process-doc listings

As the fastener's own process document lists them

Other brands' noses1 · 18 statements

Gage Bilt, for CherryMAX®, Allmax® or HuckMAX™ / HUCK-CLINCH® rivets per Gage Bilt

Cross-brand fit, only where a catalog says so

12 more statements
If your part was made by another maker1

A cross-referenced part number is a different maker's part. Its tooling is that maker's: an equivalent fastener does not make the noses interchangeable.

NAS9309M-4-09 Identical, a standard: any qualified maker Cherry CA-1015 p.27 ↗

  • Made by Cherry: the same part as yours; the tooling above applies.
  • Other brands' noses: as listed under Other brands' noses.
Sources15
  1. Cherry Fastening Systems for Aerospace Tool Catalog (©2015 edition, archived), p.26, CherryMAX® Blind Rivets & Tools, Cherry Power Tools ↗
    • H753A-456 + 680B205 on G784; H781A-456 + 680B205 on G784; H782 + 680B205 on G784: "*** Use adapter 680B205" (p.26). -4 and -5 only: CA-1015 p.5 does not shade -6 for the G784 with CherryMAX® heads, though p.26 and CA-1001 p.13 print -6; confirm with Cherry before using it at -6.
    • H680B200A on G784: CA-1015 p.5 shades G784 + H680B200A for nominal and oversize -4, -5, -6; p.21: "The use of these riveters is not preferred".
  2. Cherry CA-1001 Tool Catalog (2017), p.6, Pulling Heads table ↗
    • H701B-456 on G746A; H747-456 on G746A; H753A-456 on G746A; H781A-456 on G746A; H782 on G746A: Nominal diameters. Section 1 riveter with a Section 1 pulling head (CA-1001 p.1, p.6); CA-1015 p.5 shades nominal -4, -5, -6. The ©2015 CherryMAX guide (p.26) does not list the G746A.
  3. Cherry CA-1001 Tool Catalog (2017), p.22, Riveter Adapters ↗
    • H701B-456 + 744-300 on G83A or G84; H747-456 + 744-300 on G83A or G84; H753A-456 + 744-300 on G83A or G84; H781A-456 + 744-300 on G83A or G84; H782 + 744-300 on G83A or G84: 744-300: G83A, G84 to the G704B (CherryMAX®) mounting system "for H701B, H747, H781A, H782, H753A"; "Must remove the bayonet adapter".
  4. Cherry CA-1015 (CherryMAX process manual), p.5, CherryMAX Tool Selection ↗
    • Nominal and oversize diameters. G800 is hand powered. Inconel (CR3852, CR3853): Cherry's ©2015 tool guide p.26 says "G704B/G83A/G84 power riveters recommended for installation of Inconel fasteners due to high break stem loads".
    • Nominal -4 to -6; oversize -4 and -5 only.
    • Pulling head included.
  5. Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.43, CherryMAX®, Allmax®, HuckMAX® Nose Assemblies ↗
    • 456MAX-701-17 on GB704; 456MAX-704-54RA on GB704; 456MAX-704-43OS on GB704: "Pulls all 3" (1/8", 5/32", 3/16").
  6. Cherry CA-1015 (CherryMAX process manual), "NAS vs. CherryMAX® Cross-Reference List", p.27 ↗
  7. Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.156, Other - Gage Bilt Cross Reference, page 51 ↗
  8. Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.153, Other - Gage Bilt Cross Reference, page 48 ↗
  9. Cherry CA-1001 Tool Catalog (2017), p.7, G83A Description ↗
  10. Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.154, Other - Gage Bilt Cross Reference, page 49 ↗
  11. Cherry CA-1001 Tool Catalog (2017), p.7, G84 Description ↗
  12. Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.155, Other - Gage Bilt Cross Reference, page 50 ↗
  13. Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.142, Other - Gage Bilt Cross Reference, page 37 ↗
  14. Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.149, Other - Gage Bilt Cross Reference, page 44 ↗
  15. Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.106, Other - Gage Bilt Cross Reference, page 1 ↗

Not documented

  • Huck tooling for the Cherry part number itself is not documented: Huck's catalog names HuckMAX™ and HUCK-CLINCH® bases, not CR numbers. See the equivalents below.

Diameter -4 (1/8"): decoded from the part number.

Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.

Compatibility matrixNose by fastener, brand and diameter
FastenerTool brand-4-5-6-8-10-12
CherryMAX® / NAS9301 to NAS9312
CR3213-6-02
CherryH701B-456H747-456H753A-456H781A-456H782H680B200AH701B-456H747-456H753A-456H781A-456H782H680B200AH701B-456H747-456H753A-456H781A-456H782H680B200AH84A-8H828-8H829-8H827-8not made in this sizenot made in this size
Huck99-344299-344399-133399-133499-133599-133699-344299-344399-133399-133499-133599-133699-344299-344399-133399-133499-133599-1336not documentednot made in this sizenot made in this size
Gage Bilt456MAX-701-17456MAX-704-54RA456MAX-704-43OS456MAX-701-17456MAX-704-54RA456MAX-704-43OS456MAX-704-35456MAX-701-17456MAX-704-54RA456MAX-704-43OS456MAX-749-35not documentednot made in this sizenot made in this size
HuckMAX™ (HR32xx)
HR3213-6-02
Cherrynot documentednot documentednot documentednot documentednot documentednot documented
Huck99-344299-344399-133399-133499-133599-133699-344299-344399-133399-133499-133599-133699-344299-344399-133399-133499-133599-1336not documentednot documentednot documented
Gage Bilt456MAX-701-17456MAX-704-54RA456MAX-704-43OS456MAX-701-17456MAX-704-54RA456MAX-704-43OS456MAX-701-17456MAX-704-54RA456MAX-704-43OSnot documentednot documentednot documented
HUCK-CLINCH® (HC32xx, NAS93xxBH)
HC3213-6-02
Cherrynot documentednot documentednot documentednot documentednot documentednot documented
Huck99-344299-344399-133399-133499-133599-133699-344299-344399-133399-133499-133599-133699-344299-344399-133399-133499-133599-1336not documentednot documentednot documented
Gage Biltnot documentednot documentednot documentednot documentednot documentednot documented
Allmax® (Allfast AF32xx)
AF3213-6-02
Cherrynot documentednot documentednot documentednot documentednot documentednot documented
Hucknot documentednot documentednot documentednot documentednot documentednot documented
Gage Biltnot documentednot documentednot documentednot documentednot documentednot documented
NAS pull lockbolts (pin and collar)
NAS1446-10
CherryH513-04-20H513-05-35H513S-05-20H513S-05-35H513-06-20H513S-06-24H513-08-35H513S-08-24H513S-10-42H513S-12-42
Huck99-265199-265499-2549S99-2550S99-3703S99-3703S-199-2552S99-2553S99-255599-255699-370499-3704-199-255899-255999-295499-256499-256599-295299-370599-3705-199-256199-256299-256799-256899-295399-1720DG99-1720DGC99-257099-257199-295799-1756DG
Gage Biltnot documentedNASS05-2480-20NASS05-204C-30OSNAS06-2480-20NAS06-204C-30OSNAS08-2480-20NAS08-204D-30OSnot documentednot documented

Each cell lists the noses the brand's own catalog names for that fastener and diameter. A dash (–) means the fastener is not made in that diameter, per its catalog's size list. "Not documented" means the size exists, or its range is not on file, and no catalog on file names a nose for it, not that none exists. Gage Bilt states its tools and noses are interchangeable with Huck, Cherry and Allfast; its cross-reference (on each tool page) gives its PN for each Huck or Cherry PN. Allfast tooling is a gap until an Allfast tool catalog is on file. A NAS93xx blind rivet's tooling follows its maker: the Cherry cells are for Cherry-made parts, the Huck cells for Huck-made (HuckMAX™, HUCK-CLINCH®). NAS lockbolt cells name the standard itself.

Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers

Next step

Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

Tooling guide by family →Tooling shop →