Which tool installs this fastener?
Enter a fastener part number for the exact nose or pulling head at its diameter, the tools that take it and any adapters, from each tool maker's catalog. Or enter a tool, nose or adapter PN to see what it installs across brands. Cross-brand fits are shown only where a catalog states them; everything else reads "not documented".
Try CR3213-6-02 · HC3213-6-02 · AF3213-6-02 · NAS1446-10 · MBF2110-6-300 · HL10-6-8 · H701B-456 · G83A
Tooling for CR3243-6-01
CR3243-6-01 (CherryMAX, 3/16") installs with nose H701B-456 on a G704B, G747 or G800 riveter.
Other tools that work2 more setups · 12 process-doc listings
As the fastener's own process document lists them
- G747, G704B or G800 with H701B-456 Standard Cherry CA-1015 p.5 ↗
- G83A or G84 with H701B-456 + 744-300 Standard Cherry CA-1015 p.5 ↗
- G747, G704B or G800 with H747-456 Standard Cherry CA-1015 p.5 ↗
- G83A or G84 with H747-456 + 744-300 Standard Cherry CA-1015 p.5 ↗
- G747, G704B or G800 with H781-456 Offset Cherry CA-1015 p.5 ↗
- G83A or G84 with H781-456 + 744-300 Offset Cherry CA-1015 p.5 ↗
- G747, G704B or G800 with H781A-456 Offset Cherry CA-1015 p.5 ↗
- G83A or G84 with H781A-456 + 744-300 Offset Cherry CA-1015 p.5 ↗
- 4 more on the family tool tables.
Other brands' noses2 · 21 statements
Gage Bilt, for CherryMAX®, Allmax® or HuckMAX™ / HUCK-CLINCH® rivets per Gage Bilt
- 456MAX-701-17standard·456MAX-704-54RAright angle·456MAX-704-43OSoffsetonGB704Gage Bilt 2017 p.43 ↗
- 456MAX-749-35standardonGB704Gage Bilt 2017 p.41 ↗
Cross-brand fit, only where a catalog says so
- Cherry says G83A fits Huck 230, 362 (bayonet mount) (Huck) Cherry CA-1001 p.7 ↗
G83A bayonet mounting system, "common for G83A and G84 (compatible to Huck 230, 362 models."
- Cherry says G84 fits Huck 230, 362 (bayonet mount) (Huck) Cherry CA-1001 p.7 ↗
G84 bayonet mounting system, "common for G83A and G84 (compatible to Huck 230, 362 models)."
- Gage Bilt says 456MAX-701-17 replaces H701B-456 (Cherry) Gage Bilt 2017 p.156 ↗
Gage Bilt's cross-reference lists 456MAX-701-17 (nose assembly) for H701B-456.
- Gage Bilt says GB704 replaces G704B (Cherry) Gage Bilt 2017 p.153 ↗
Gage Bilt's cross-reference lists GB704 (installation tool) for G704B.
- Gage Bilt says GB704SH replaces G704B-40SH (Cherry) Gage Bilt 2017 p.153 ↗
Gage Bilt's cross-reference lists GB704SH (install tool / split handle) for G704B-40SH.
- Gage Bilt says GB704 replaces G747 (Cherry) Gage Bilt 2017 p.153 ↗
Gage Bilt's cross-reference lists GB704 (installation tool) for G747.
15 more statements
- Gage Bilt says 456MAX-704-17 replaces H747-456 (Cherry) Gage Bilt 2017 p.156 ↗
Gage Bilt's cross-reference lists 456MAX-704-17 (nose assembly) for H747-456.
- Gage Bilt says 456MAX-704-54RA replaces H753A-456 (Cherry) Gage Bilt 2017 p.156 ↗
Gage Bilt's cross-reference lists 456MAX-704-54RA (nose assembly - rt. angle) for H753A-456.
- Gage Bilt says 456MAX-704-40OS replaces H782 (Cherry) Gage Bilt 2017 p.156 ↗
Gage Bilt's cross-reference lists 456MAX-704-40OS (nose assembly - offset) for H782.
- Gage Bilt says GB730 replaces G83A (Cherry) Gage Bilt 2017 p.154 ↗
Gage Bilt's cross-reference lists GB730 (installation tool) for G83A.
- Gage Bilt says GB731 replaces G84 (Cherry) Gage Bilt 2017 p.154 ↗
Gage Bilt's cross-reference lists GB731 (installation tool) for G84.
- Gage Bilt says 456MAX-680-31 replaces H680B200A (Cherry) Gage Bilt 2017 p.155 ↗
Gage Bilt's cross-reference lists 456MAX-680-31 (nose assembly) for H680B200A.
- Gage Bilt says GB784 replaces G784 (Cherry) Gage Bilt 2017 p.153 ↗
Gage Bilt's cross-reference lists GB784 (installation tool) for G784.
- Gage Bilt says 456MAX-701-17 replaces 99-1479 (Huck) Gage Bilt 2017 p.142 ↗
Gage Bilt's cross-reference lists 456MAX-701-17 (nose assembly) for 99-1479.
- Gage Bilt says 456MAX-701-17 replaces 99-3442 (Huck) Gage Bilt 2017 p.149 ↗
Gage Bilt's cross-reference lists 456MAX-701-17 (nose assembly) for 99-3442.
- Gage Bilt says GB704 replaces 2013 (Huck) Gage Bilt 2017 p.106 ↗
Gage Bilt's cross-reference lists GB704 (installation tool) for 2013.
- Gage Bilt says 456MAX-704-54RA replaces 99-1334 (Huck) Gage Bilt 2017 p.142 ↗
Gage Bilt's cross-reference lists 456MAX-704-54RA (nose assembly - rt. angle) for 99-1334.
- Gage Bilt says 456MAX-704-43OS replaces 99-1333 (Huck) Gage Bilt 2017 p.142 ↗
Gage Bilt's cross-reference lists 456MAX-704-43OS (nose assembly - offset) for 99-1333.
- Gage Bilt says 456MAX-749-35 replaces 99-1335 (Huck) Gage Bilt 2017 p.142 ↗
Gage Bilt's cross-reference lists 456MAX-749-35 (nose assembly) for 99-1335.
- Gage Bilt says 456MAX-749-35 replaces 99-3442 (Huck) Gage Bilt 2017 p.149 ↗
Gage Bilt's cross-reference lists 456MAX-749-35 (nose assembly) for 99-3442.
- Gage Bilt says 456MAX-704-40OS replaces 99-1336 (Huck) Gage Bilt 2017 p.142 ↗
Gage Bilt's cross-reference lists 456MAX-704-40OS (nose assembly - offset) for 99-1336.
If your part was made by another maker3
A cross-referenced part number is a different maker's part. Its tooling is that maker's: an equivalent fastener does not make the noses interchangeable.
NAS9304B-6-01 Identical, a standard: any qualified maker Cherry CA-1015 p.27 ↗
HC3243 Same cross-reference group, not an equivalent of the input, Huck (Howmet) Cherry CA-1015 ↗
NAS9304BH Same cross-reference group, not an equivalent of the input, a standard: any qualified maker Cherry CA-1015 ↗
Sources17
- Cherry Fastening Systems for Aerospace Tool Catalog (©2015 edition, archived), p.26, CherryMAX® Blind Rivets & Tools, Cherry Power Tools ↗
- H680B200A on G784: CA-1015 p.5 shades G784 + H680B200A for nominal and oversize -4, -5, -6; p.21: "The use of these riveters is not preferred".
- Cherry CA-1001 Tool Catalog (2017), p.22, Riveter Adapters ↗
- H701B-456 + 744-300 on G83A, G84; H747-456 + 744-300 on G83A, G84; H753A-456 + 744-300 on G83A, G84; H781A-456 + 744-300 on G83A, G84; H782 + 744-300 on G83A, G84: 744-300: G83A, G84 to the G704B (CherryMAX®) mounting system "for H701B, H747, H781A, H782, H753A"; "Must remove the bayonet adapter".
- Cherry CA-1015 (CherryMAX process manual), p.5, CherryMAX Tool Selection ↗
- Nominal and oversize diameters. G800 is hand powered. Inconel (CR3852, CR3853): Cherry's ©2015 tool guide p.26 says "G704B/G83A/G84 power riveters recommended for installation of Inconel fasteners due to high break stem loads".
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.43, CherryMAX®, Allmax®, HuckMAX® Nose Assemblies ↗
- 456MAX-701-17 on GB704; 456MAX-704-54RA on GB704; 456MAX-704-43OS on GB704: "Pulls all 3" (1/8", 5/32", 3/16").
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.41, GB704 Nose Assembly Selection Chart ↗
- 456MAX-749-35 on GB704: GB704 chart; note 2: "installs 1/8", 5/32", and 3/16" diameters". The chart names CherryMAX®, not Allmax® or HuckMAX®.
- Cherry CA-1015 (CherryMAX process manual), "NAS vs. CherryMAX® Cross-Reference List", p.27 ↗
- Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.80, Model 2013, Standard Inline & Offset Nose Assemblies ↗
- 99-3442 on 2013; 99-3443 on 2013; 99-1333 on 2013; 99-1334 on 2013; 99-1335 on 2013; 99-1336 on 2013: Model 2013, Standard Inline & Offset Nose Assemblies (1/8", 5/32" and 3/16" columns).
- Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.82, Model 2013, Standard Inline & Offset Nose Assemblies ↗
- 99-3442 on 2013; 99-3443 on 2013; 99-1333 on 2013; 99-1334 on 2013; 99-1335 on 2013; 99-1336 on 2013: Model 2013, Standard Inline & Offset Nose Assemblies (1/8", 5/32" and 3/16" columns).
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.156, Other - Gage Bilt Cross Reference, page 51 ↗
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.153, Other - Gage Bilt Cross Reference, page 48 ↗
- Cherry CA-1001 Tool Catalog (2017), p.7, G83A Description ↗
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.154, Other - Gage Bilt Cross Reference, page 49 ↗
- Cherry CA-1001 Tool Catalog (2017), p.7, G84 Description ↗
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.155, Other - Gage Bilt Cross Reference, page 50 ↗
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.142, Other - Gage Bilt Cross Reference, page 37 ↗
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.149, Other - Gage Bilt Cross Reference, page 44 ↗
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.106, Other - Gage Bilt Cross Reference, page 1 ↗
Not documented
- Huck tooling for the Cherry part number itself is not documented: Huck's catalog names HuckMAX™ and HUCK-CLINCH® bases, not CR numbers. See the equivalents below.
Diameter -6 (3/16"): decoded from the part number.
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Compatibility matrixNose by fastener, brand and diameter
Each cell lists the noses the brand's own catalog names for that fastener and diameter. "Not documented" means no catalog on file names one, not that none exists. Gage Bilt states its tools and noses are interchangeable with Huck, Cherry and Allfast; its cross-reference (on each tool page) gives its PN for each Huck or Cherry PN. Allfast tooling is a gap until an Allfast tool catalog is on file. A NAS93xx blind rivet's tooling follows its maker: the Cherry cells are for Cherry-made parts, the Huck cells for Huck-made (HuckMAX™, HUCK-CLINCH®). NAS lockbolt cells name the standard itself.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next · 3 Quote
Buy the tooling with the fasteners
Add set to quote puts the nose, the tool and any adapters on the one quote, each with its catalog citation.