Which tool installs this fastener?
Enter a fastener part number for the exact nose or pulling head at its diameter, the tools that take it and any adapters, from each tool maker's catalog. Or enter a tool, nose or adapter PN to see what it installs across brands. Cross-brand fits are shown only where a catalog states them; everything else reads "not documented".
Try CR3213-6-02 · HC3213-6-02 · AF3213-6-02 · NAS1446-10 · MBF2110-6-300 · HL10-6-8 · H701B-456 · G83A
Tooling for CR3246-6-03
CR3246-6-03 (CherryMAX, 3/16") installs with G747, G704B or G800 with H701B-456 Standard.
Other tools that work17 process-doc listings
As the fastener's own process document lists them
- G746A with H701B-456 Standard Cherry CA-1015 p.5 ↗
- G83A or G84 with H701B-456 + 744-300 Standard Cherry CA-1015 p.5 ↗
- G747, G704B or G800 with H747-456 Standard Cherry CA-1015 p.5 ↗
- G746A with H747-456 Standard Cherry CA-1015 p.5 ↗
- G83A or G84 with H747-456 + 744-300 Standard Cherry CA-1015 p.5 ↗
- G747, G704B or G800 with H781-456 Offset Cherry CA-1015 p.5 ↗
- G746A with H781-456 Offset Cherry CA-1015 p.5 ↗
- G83A or G84 with H781-456 + 744-300 Offset Cherry CA-1015 p.5 ↗
- 9 more on the family tool tables.
Other brands' noses10 statements
Cross-brand fit, only where a catalog says so
- Cherry says G83A fits Huck 230, 362 (bayonet mount) (Huck) Cherry CA-1001 p.7 ↗
G83A bayonet mounting system, "common for G83A and G84 (compatible to Huck 230, 362 models."
- Cherry says G84 fits Huck 230, 362 (bayonet mount) (Huck) Cherry CA-1001 p.7 ↗
G84 bayonet mounting system, "common for G83A and G84 (compatible to Huck 230, 362 models)."
- Gage Bilt says GB704 replaces G747 (Cherry) Gage Bilt 2017 p.153 ↗
Gage Bilt's cross-reference lists GB704 (installation tool) for G747.
- Gage Bilt says GB704 replaces G704B (Cherry) Gage Bilt 2017 p.153 ↗
Gage Bilt's cross-reference lists GB704 (installation tool) for G704B.
- Gage Bilt says 456MAX-701-17 replaces H701B-456 (Cherry) Gage Bilt 2017 p.156 ↗
Gage Bilt's cross-reference lists 456MAX-701-17 (nose assembly) for H701B-456.
- Gage Bilt says GB730 replaces G83A (Cherry) Gage Bilt 2017 p.154 ↗
Gage Bilt's cross-reference lists GB730 (installation tool) for G83A.
4 more statements
- Gage Bilt says GB731 replaces G84 (Cherry) Gage Bilt 2017 p.154 ↗
Gage Bilt's cross-reference lists GB731 (installation tool) for G84.
- Gage Bilt says 456MAX-704-17 replaces H747-456 (Cherry) Gage Bilt 2017 p.156 ↗
Gage Bilt's cross-reference lists 456MAX-704-17 (nose assembly) for H747-456.
- Gage Bilt says 456MAX-704-40OS replaces H782 (Cherry) Gage Bilt 2017 p.156 ↗
Gage Bilt's cross-reference lists 456MAX-704-40OS (nose assembly - offset) for H782.
- Gage Bilt says 456MAX-704-54RA replaces H753A-456 (Cherry) Gage Bilt 2017 p.156 ↗
Gage Bilt's cross-reference lists 456MAX-704-54RA (nose assembly - rt. angle) for H753A-456.
Sources6
- Cherry CA-1015 (CherryMAX process manual), p.5, CherryMAX Tool Selection ↗
- Nominal and oversize diameters. G800 is hand powered. Inconel (CR3852, CR3853): Cherry's ©2015 tool guide p.26 says "G704B/G83A/G84 power riveters recommended for installation of Inconel fasteners due to high break stem loads".
- Nominal -4 to -6; oversize -4 and -5 only.
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.153, Other - Gage Bilt Cross Reference, page 48 ↗
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.156, Other - Gage Bilt Cross Reference, page 51 ↗
- Cherry CA-1001 Tool Catalog (2017), p.7, G83A Description ↗
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.154, Other - Gage Bilt Cross Reference, page 49 ↗
- Cherry CA-1001 Tool Catalog (2017), p.7, G84 Description ↗
Diameter -6 (3/16"): decoded from the part number.
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Compatibility matrixNose by fastener, brand and diameter
Each cell lists the noses the brand's own catalog names for that fastener and diameter. A dash (–) means the fastener is not made in that diameter, per its catalog's size list. "Not documented" means the size exists, or its range is not on file, and no catalog on file names a nose for it, not that none exists. Gage Bilt states its tools and noses are interchangeable with Huck, Cherry and Allfast; its cross-reference (on each tool page) gives its PN for each Huck or Cherry PN. Allfast tooling is a gap until an Allfast tool catalog is on file. A NAS93xx blind rivet's tooling follows its maker: the Cherry cells are for Cherry-made parts, the Huck cells for Huck-made (HuckMAX™, HUCK-CLINCH®). NAS lockbolt cells name the standard itself.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.