Which tool installs this fastener?
Enter a fastener part number for the exact nose or pulling head at its diameter, the tools that take it and any adapters, from each tool maker's catalog. Or enter a tool, nose or adapter PN to see what it installs across brands. Cross-brand fits are shown only where a catalog states them; everything else reads "not documented".
Try CR3213-6-02 · HC3213-6-02 · AF3213-6-02 · NAS1446-10 · MBF2110-6-300 · HL10-6-8 · H701B-456 · G83A
Tooling for CR3243-8-09
CR3243-8-09 (CherryMAX, 1/4") installs with nose H84A-8 on a G84 riveter.
Other tools that work2 more setups · 1 process-doc listing
- H828-8right angle·H827-8offsetonG84+ adapter744-200Cherry 2015 catalog p.26 ↗
- H829-8right angleonG84Cherry CA-1001 p.8 ↗
As the fastener's own process document lists them
- G84 with H84A-8 Standard Cherry CA-1015 p.5 ↗
Other brands' noses3 statements
Cross-brand fit, only where a catalog says so
- Cherry says G84 fits Huck 230, 362 (bayonet mount) (Huck) Cherry CA-1001 p.7 ↗
G84 bayonet mounting system, "common for G83A and G84 (compatible to Huck 230, 362 models)."
- Gage Bilt says GB731 replaces G84 (Cherry) Gage Bilt 2017 p.154 ↗
Gage Bilt's cross-reference lists GB731 (installation tool) for G84.
- Gage Bilt says 08MAX-744A-50OS replaces H827-8 (Cherry) Gage Bilt 2017 p.156 ↗
Gage Bilt's cross-reference lists 08MAX-744A-50OS (nose assembly - offset) for H827-8.
If your part was made by another maker1
A cross-referenced part number is a different maker's part. Its tooling is that maker's: an equivalent fastener does not make the noses interchangeable.
NAS9304B-8-09 Identical, a standard: any qualified maker Cherry CA-1015 p.27 ↗
- Made by Cherry: the same part as yours; the tooling above applies.
Sources8
- Cherry CA-1015 (CherryMAX process manual), p.5, CherryMAX® Tool Selection (shaded chart) ↗
- H84A-8 on G84: CA-1015 p.5 shades G84 + H84A-8, adaptor none, nominal and oversize -8. The ©2015 guide p.26 prints "G83A/84"; the G83A is not shaded for -8 in CA-1015 and is left off.
- Cherry Fastening Systems for Aerospace Tool Catalog (©2015 edition, archived), p.26, CherryMAX® Blind Rivets & Tools, Cherry Power Tools ↗
- H828-8 + 744-200 on G84; H827-8 + 744-200 on G84: "* Use adapter 744-200". p.26 prints "G83A/84"; G84 only here (CA-1015 p.5 shades -8 for the G84 only).
- Cherry CA-1001 Tool Catalog (2017), p.8, Pulling Heads for G83A/G84 tools ↗
- H829-8 on G84: CA-1001 p.8: CherryMAX® Right Angle H829-8, adaptor none, -5, -6, -8 ("Pulling Heads for G83A/G84 tools"); G84 only for -8 per CA-1015 p.5. Replaces the ©2015 guide's H829-56MBPS, which the 2017 catalog lists for MAXIBOLT PLUS® -5, -6.
- Cherry CA-1015 (CherryMAX process manual), p.5, CherryMAX Tool Selection ↗
- Nominal and oversize -8.
- Cherry CA-1015 (CherryMAX process manual), "NAS vs. CherryMAX® Cross-Reference List", p.27 ↗
- Cherry CA-1001 Tool Catalog (2017), p.7, G84 Description ↗
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.154, Other - Gage Bilt Cross Reference, page 49 ↗
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.156, Other - Gage Bilt Cross Reference, page 51 ↗
Not documented
- Huck tooling for the Cherry part number itself is not documented: Huck's catalog names HuckMAX™ and HUCK-CLINCH® bases, not CR numbers. See the equivalents below.
Diameter -8 (1/4"): decoded from the part number.
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Compatibility matrixNose by fastener, brand and diameter
Each cell lists the noses the brand's own catalog names for that fastener and diameter. A dash (–) means the fastener is not made in that diameter, per its catalog's size list. "Not documented" means the size exists, or its range is not on file, and no catalog on file names a nose for it, not that none exists. Gage Bilt states its tools and noses are interchangeable with Huck, Cherry and Allfast; its cross-reference (on each tool page) gives its PN for each Huck or Cherry PN. Allfast tooling is a gap until an Allfast tool catalog is on file. A NAS93xx blind rivet's tooling follows its maker: the Cherry cells are for Cherry-made parts, the Huck cells for Huck-made (HuckMAX™, HUCK-CLINCH®). NAS lockbolt cells name the standard itself.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.