Which tool installs this fastener?
Enter a fastener part number for the exact nose or pulling head at its diameter, the tools that take it and any adapters, from each tool maker's catalog. Or enter a tool, nose or adapter PN to see what it installs across brands. Cross-brand fits are shown only where a catalog states them; everything else reads "not documented".
Try CR3213-6-02 · HC3213-6-02 · AF3213-6-02 · NAS1446-10 · MBF2110-6-300 · HL10-6-8 · H701B-456 · G83A
Tooling for MRL3212-06-400
MRL3212-06-400 (Radial-Lok, 3/16") installs with MP550RL-6AA (MP550RL with MPPBF-8 + MPBF-6) Standard.
Other tools that work1 process-doc listing
As the fastener's own process document lists them
- MRT550RL-6AA (MRT550RL with MRTPRL-8 + MRTRL-6) Right angle Monogram MRL1003 p.7 ↗
Sources2
- Monogram MRL1003 (Radial-Lok install spec), p.6, Table 1 ↗
- Wrench adapter (turns screw) MPBF-6; nose adapter (holds nut) MPPBF-8.
- Monogram MRL1003 (Radial-Lok install spec), p.7, Table 2 ↗
- Wrench adapter MRTRL-6; nose adapter MRTPRL-8.
Diameter -6 (3/16"): decoded from the part number.
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Compatibility matrixNose by fastener, brand and diameter
Each cell lists the noses the brand's own catalog names for that fastener and diameter. "Not documented" means no catalog on file names one, not that none exists. Gage Bilt states its tools and noses are interchangeable with Huck, Cherry and Allfast; its cross-reference (on each tool page) gives its PN for each Huck or Cherry PN. Allfast tooling is a gap until an Allfast tool catalog is on file. A NAS93xx blind rivet's tooling follows its maker: the Cherry cells are for Cherry-made parts, the Huck cells for Huck-made (HuckMAX™, HUCK-CLINCH®). NAS lockbolt cells name the standard itself.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next · 3 Quote
Buy the tooling with the fasteners
Add set to quote puts the nose, the tool and any adapters on the one quote, each with its catalog citation.