Which tool installs this fastener?
Enter a fastener part number for the exact nose or pulling head at its diameter, the tools that take it and any adapters, from each tool maker's catalog. Or enter a tool, nose or adapter PN to see what it installs across brands. Cross-brand fits are shown only where a catalog states them; everything else reads "not documented".
Try CR3213-6-02 · HC3213-6-02 · AF3213-6-02 · NAS1446-10 · MBF2110-6-300 · HL10-6-8 · H701B-456 · G83A
Tooling for MBF2012SA-3-600
MBF2012SA-3-600 (Composi-Lok II, 3/32"): the process document lists these tools for this size.
- MP550BFMP550 BF Pneumatic Pistol (pneumatic motor assembly)Monogram MBF2003 Rev AG p.4 ↗
- MRT550BFMRT550BF Pneumatic Right Angle Torque Responsive ToolMonogram MBF2003 Rev AG p.5 ↗
- MRC550MRC550 Pneumatic Close Quarter Power ToolMonogram MBF2003 Rev AG p.6 ↗
- MRCR250MRCR250 Close Quarter Ratchet ToolMonogram MBF2003 Rev AG p.7 ↗
- MR550MR550 Pneumatic Right Angle ToolMonogram MBF2003 Rev AG p.8 ↗
- MH75MH75 Hand ToolMonogram MBF2003 Rev AG p.9 ↗
- MHC75AMHC75 Close Quarter Hand ToolMonogram MBF2003 Rev AG p.10 ↗
No per-size tool and nose table is on file for this family: see Sources.
Sources7
- Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.4, Figure 1 ↗
- Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.5, Figure 2 ↗
- Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.6, Figure 3 ↗
- Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.7, Figure 4 ↗
- Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.8, Figure 5 ↗
- Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.9, Figure 6 ↗
- Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.10, Figure 7, Table 7 ↗
Diameter -3 (3/32"): decoded from the part number.
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Compatibility matrixNose by fastener, brand and diameter
Each cell lists the noses the brand's own catalog names for that fastener and diameter. A dash (–) means the fastener is not made in that diameter, per its catalog's size list. "Not documented" means the size exists, or its range is not on file, and no catalog on file names a nose for it, not that none exists. Gage Bilt states its tools and noses are interchangeable with Huck, Cherry and Allfast; its cross-reference (on each tool page) gives its PN for each Huck or Cherry PN. Allfast tooling is a gap until an Allfast tool catalog is on file. A NAS93xx blind rivet's tooling follows its maker: the Cherry cells are for Cherry-made parts, the Huck cells for Huck-made (HuckMAX™, HUCK-CLINCH®). NAS lockbolt cells name the standard itself.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.