← Tooling compatibility finder

MHC75A

MHC75 Close Quarter Hand Tool · Installation tool · Close quarter

3D model not available: dimensions not published. 3D library

Fastener process documents that name it2
Other brands' equivalents0 statements

No cross-brand statement on file for these tools. Not documented is not the same as incompatible.

Sources2
  1. Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.10, Figure 7, Table 7 ↗
  2. Monogram PLT5002 Rev N (Visu-Lok II install spec), p.11, Figure 8, Table 8 ↗

Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.

Published dimensions3 · for envelope CAD

No dimensions are printed for this item in the catalogs on file.

As printed in the fastener process documents

Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.

Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers

Next step

Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

Find tooling for a part number →Tooling shop →