Which tool installs this fastener?
Enter a fastener part number for the exact nose or pulling head at its diameter, the tools that take it and any adapters, from each tool maker's catalog. Or enter a tool, nose or adapter PN to see what it installs across brands. Cross-brand fits are shown only where a catalog states them; everything else reads "not documented".
Try CR3213-6-02 · HC3213-6-02 · AF3213-6-02 · NAS1446-10 · MBF2110-6-300 · HL10-6-8 · H701B-456 · G83A
Tooling for CR2249-6-02
CR2249-6-02 (CherryLOCK, 3/16") installs with G784 with H681 Standard.
Other tools that work2 process-doc listings
As the fastener's own process document lists them
- G686B-S with H681 Standard Cherry CA-1013 p.14 ↗
- G689 with H681 Standard Cherry CA-1013 p.14 ↗
Other brands' noses1 statement
Cross-brand fit, only where a catalog says so
- Gage Bilt says GB784 replaces G784 (Cherry) Gage Bilt 2017 p.153 ↗
Gage Bilt's cross-reference lists GB784 (installation tool) for G784.
Sources2
- Cherry CA-1013 (CherryLOCK process manual), p.14, Selecting Cherrylock Tools ↗
- Bulbed: all grips; -6 Monel and Inconel "may require 95 PSI air pressure at tool".
- Bulbed: all grips.
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.153, Other - Gage Bilt Cross Reference, page 48 ↗
Diameter -6 (3/16"): decoded from the part number.
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Compatibility matrixNose by fastener, brand and diameter
Each cell lists the noses the brand's own catalog names for that fastener and diameter. "Not documented" means no catalog on file names one, not that none exists. Gage Bilt states its tools and noses are interchangeable with Huck, Cherry and Allfast; its cross-reference (on each tool page) gives its PN for each Huck or Cherry PN. Allfast tooling is a gap until an Allfast tool catalog is on file. A NAS93xx blind rivet's tooling follows its maker: the Cherry cells are for Cherry-made parts, the Huck cells for Huck-made (HuckMAX™, HUCK-CLINCH®). NAS lockbolt cells name the standard itself.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next · 3 Quote
Buy the tooling with the fasteners
Add set to quote puts the nose, the tool and any adapters on the one quote, each with its catalog citation.